• Home
  • Showing WATER DECALS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing WATER DECALS product(s)

Showing 91 - 120 of 164 products

Quick View
img
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
RM18.80 Add to cart
Quick View
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM15.08

HG 1/144 STRIKE FREEDOM Metal Effect Water Decal

- Water Decal for HG 1/144 Strike Freedom Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 10 cm x 9 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM14.90
RM14.90 Add to cart
Quick View
img
SAVERM8.90

Water Decal MG 1/144 Gundam Seed Blitz Gundam

- Water Decal for Water Decal MG 1/144 Gundam Seed Blitz Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal RG/ HG 1/144 00 QAN[T] Gundam

- Water Decal for RG/ HG 00 QAN[T] OO?Qan[T] 
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM19.90

Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam

- Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam Water Decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 15 cm x 20 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #47 Gundam OO Multiuse 2 [MS AEU Enact Union Flag Tieren Space Ground commander Taozi Type]

Water Decal 47 For HG Gundam 00 Series Set 2 [MS AEU Enact Union Flag Tieren Space Ground commander Taozi Type] 1/144 HG Gundam Bandai Multi Use Decals Multiuse

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM12.90

HG 1/100 VF-22S Sturmvogel II dedicated water transfer decal

Introducing a special water-transfer decal that pursues the quality of the aircraft models of the Milia and Max!

For HG 1/100 VF-22S Sturmvogel II.
This product contains only one set of HG 1/100 VF-22S Sturmvogel II water-transfer decals.

[Accessories]
1 water-transfer decal

RM29.00
RM29.00 Add to cart
Quick View
img
SAVERM10.00

[VT] Water Decal for Gundam Machine Nest Domain Base - S Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Small Size

RM8.00
RM8.00 Add to cart
Quick View
img
SAVERM14.00

[VT] Water Decal for Gundam Machine Nest Domain Base - L Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Large Size

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM13.90

Bandai Water Decal for Macross Frontier HG 1/100 YF-29 Durandal Valkyrie (for the Maximilian Genus Custom Full Set Pack)

This is a sheet of water-slide decals, dry transfers, or self-adhesive stickers for use in detailing anime or science-fiction kits.

This set of decals was made especially for Bandai's 1/100 HG YF-29 Durandal Valkyrie (Maximilian Genus Custom) Full Set Pack model kit! Decals are included for all three forms: Battroid, Gerwalk and Fighter. Order yours today!

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM3.00

[Amex] Fluorescent Water Decal for MR Model (MJH) HIRM alike 1/100 Gundam Astray Noir

[Amex] Fluorescent  Water Decal for MR Model (MJH) HIRM alike 1/100 Gundam Astray Noir

This is a High Quality Fluorescent  Water Decal by AMAX and it is not a sticker. 

- Special design for HIRM alike 1/100 Gundam Astray Noir
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.90
RM16.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal Maintenance Racks, Hangars, Warning Stripes, Universal Water Decal

[Da Lin] Maintenance Racks, Hangars, Warning Stripes, Universal Water Decal

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #128 Mobile Suit Gundam OO The Movie Multiuse 2

\"Gundam Decal\" new lineup! Introducing water transfer decals that can be used on 1/144 scale!
Highly versatile water transfer decal.
Decals compatible with Harute Raphael Jinx IV are included.

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GTO Prototype Gouf (Tactical Demonstrator)

[Da Lin] Water Decal HG 1/144 GTO Prototype Gouf (Tactical Demonstrator)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 GTO Prototype Gouf (Tactical Demonstrator)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Zogok (Unicorn Ver.)

[Da Lin] Water Decal HG 1/144 Zogok (Unicorn Ver.)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Zogok (Unicorn Ver.)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 D Gun First Gundam

[Da Lin] Water Decal HG 1/144 HG 1/144 D Gun First Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 HG 1/144 D Gun First Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GM Sniper II

[Da Lin] Water Decal HG 1/144 GM Sniper II

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 GM Sniper II
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Build Fighter Wing Gundam Zero Honoo

[Da Lin] Water Decal HG 1/144 Build Fighter Wing Gundam Zero Honoo

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Build Fighter Wing Gundam Zero Honoo
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Ez8 Gundam

[Da Lin] Water Decal HG 1/144 Ez8 Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Ez8 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 RGM-96X Jesta

[Da Lin] Water Decal HG 1/144 RGM-96X Jesta

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 RGM-96X Jesta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
PO PriceRM28.00

HG 1/144 VF-25G Messiah Valkyrie Michael Custom Water Decals

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : SEP 2026
Estimate arrival : OCT 2026

- P-O Price RM28.00
- Deposit RM10.00, Balance RM18.00
- We will inform to make balance RM18.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Bandai brings us a set of decals made especially for their 1/100-scale HG model kit of Michael Blanc\'s custom VF-25G Messiah Valkyrie, as seen in \"Macross Frontier\"! 
A wide variety of caution marks and other markings is included.

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart
Quick View
img
SAVERM5.89

[Water Decal] MG ZGMF-X42S Destiny Gundam Water Decal

- Water decal for HG / MG warning sign water decal - RED color
- Not pre-cut like the bandai slide water decal
- Extra touch of details for modeling kit

RM12.10
RM12.10 Request Stock

Showing 91 - 120 of 164 products