• It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  
• Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  
• The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  
• Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  
• Katoki Hajime has designed the markings. 
  
• Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

• Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  
• You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  
• The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1
  

• The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  
• Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  
• The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  
• Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model.
  

• The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  
• Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  
• GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  
• Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  
• Includes custom marking seals and Gundam Decals.
  
• Includes GN Code decal sheet.
  
• GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  
• stand included to hold the Drive while it's not with the Exia.
  
• Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  
• GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

• Announced along with the release of the Mobile Suit Gundam SEED Destiny HD Remaster's Ootori Striker, this marks the fastest a Suit has been translated into an MG in Gundam history! 
• Following in the footsteps of the Aile Strike Gundam, the Strike Rogue is remastered (Ver.RM), giving the kit a more streamlined look and wide range of motion. Introduced in the HD Remaster of M.S.G.: SEED Destiny, the Ootori Striker Pack was designed by master mechanical designer Kunio Okawara. An Integrated Weapon Striker Pack, the Ootori is full of gimmicks
• Following the Aile Strike Gundam, MG Strike of Rouge becomes a Ver.RM.
• Ootori Striker Pack wings expand into a characteristic -  X -   shape, and tail can be folded. 
• Missile Launcher is mounted over the left shoulder.
• Dedicated Stand to help reenact arial action poses is included.
• IWSP EW454F Ootori Pack is separable from the Strike Rogue, and includes a transformation gimmick to shift into flight mode. 
• The MBF-02 Strike Rouge has been equipped with the IWSP (Integrated Weapon Strike Pack) Ootori Striker for maximum offensive output! Designed with an aerodynamic profile, advanced propulsion system and a full arsenal- Railgun, Beam Launcher, Missile Pod and Anti-Ship Sword. 
• Accessories: 57mm High-Energy Beam Rifle, Anti-Beam Shield, Armor Schneider x2, Beam Saber x2, Ootori Striker Pack, Dedicated Stand

Daban 1/100 MSA-0011(Ext) Ex-S Gundam (MG)

• Gundam Astray Blue Frame D from "Mobile Suit Gundam SEED DESTINY ASTRAY B" joins the MG series. 
• Inner structure based on human anatomy, that is distinctive of Astray series, realizes both wide range of motion and perfect shape. 
• The gimmick to unite the Dragoon, that represents weapons of Blue Frame D, and the Big Sword can be recreated. 
• You can attach the Striker on its back. Includes a display base to show it in a flight situation. 
• Words of caution and markings on the body can be expressed with included marking stickers and Gundam decals. 
• Includes 1/100 figures of Gai Murakumo and Elsa Weiss. 
  
  
• Runner x25, Foil sticker x1, Dry decal x1, Tetron sticker x1, Instruction manual x1
  

MG 1/100 MSM-07 Z'Gok 

[Daban] 1/100 Jesta (MG) Clear Version

Daban 1/100 RX-0 Unicorn Gundam + MS Cage

Manufacturer: DABAN

[Daban] 6648 MG 1/100 Hyaku Shiki

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

Daban MG 1/100 Freedom Gundam Ver.2.0

Daban 8822 1/100 OOQ 00 Qan[T] Gundam Quanta MB Ver.Brand: DabanCountry of production: China
Package Content

• ABS Plastic model pla plate
• Action Base included
• Water Decal included
• LED light and battery included
• Not included manual book. (Need to download manual )

Daban 8821 MG 1/100 F91 with Twin VSBR (Metal Build Alike Ver.)

Daban MG 1/100 Unicorn

[DABAN] 6638 MG 1/100 RX-0 Full Armor Unicorn Gundam Ver. Ka.

[Daban] Metal Build Strike Freedom Gundam