MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas. The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.

Mr.Surfacer 1200 contains finer granules than Mr.Surfacer 1000. They are both used in much the same way but, due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible.

Mr Finishing Surfacer 1500 - black primer micro filler in a convenient spray can. Perfect for a quick application without the need to clean your airbrush afterwards.Covers minor scratches and surface imperfections. Dries quickly for an ultra smooth finish which once dry can be sanded and polished further if needed. Can be applied in multiple layers as needed for that perfect finish.

This surfacer has reproduced the rust-proofing color used as the base color on tanks. Base coat painting on tanks can be done in one go, so that you can start painting the exterior within a shorter time.We have made this the same number as the widely used Surfacer 1000.

New Gundam Marker set for SD GUNDAM WORLD SANGOKU SOKETSUDEN series

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 

Mr. LEVELING THINNER is excellent for spray (airbrush) applicators.
Mixing Mr. LEVELING THINNER into Mr. COLOR at a ratio of 1:1 or 1:2 improves coat leveling and increases shine. When drying is slow because of insufficient air current during winter months, it is best to mix Mr. COLOR THINNER into Mr. LEVELING THINNER.

• Mr Hobby Mr. White Surfacer 1000 
• Since it is white, Mr.WHITE SURFACER is used to modify plastic model parts that are black or dark in color. If this is used on the entire model, only a thin over-coat of paint in the desired color is necessary.
  

Mr. LEVELING THINNER is excellent for spray (airbrush) applicators.
Mixing Mr. LEVELING THINNER into Mr. COLOR at a ratio of 1:1 or 1:2 improves coat leveling and increases shine. When drying is slow because of insufficient air current during winter months, it is best to mix Mr. COLOR THINNER into Mr. LEVELING THINNER.

This product quickly dissolves paint stains on airbrushes, brushes, paint trays, spare bottles, etc. Keeping your tools clean is the best way to become a better modeler.

This is a new type thinner dedicated to Mr. Color.
Drying speed when an air brush is used is faster than with the regular thinner, and when metallic paint is used in particular, metallic particles are aligned evenly to produce a neat glossy surface.
This is also suitable for dilution of surfacer and mat paint, and also for camouflage painting and gradation painting.
* Because of the fast drying speed, we do not recommend this for glossy paint types other than metallic painting.

• It can provide the smooth surface as well as GX114 SUPER SMOOTH CLEAR, and paint large area. Mr.SUPER SMOOTH CLEAR FLAT is developed on a concept of "make the surface smoother!". Because of including fluorine, it can provide the smoother surface campared with existing items (C182, B514) . Also it has ability that decreasing occuring of whitening phenomenon. So we can say this is the the high grade flat coat spray. When you spray this item to unpainted plastic models, it will look like all-painted. In addition, if the painted surface was smooth, the friction of each painted surfaces will be decreased, therefore... * It decrease the scratch occuring. * Joint parts moves smoothly.
  
• These are epoch-making ability for plastic model paints. Please use this as the special finishing coat for your precious works!
  
• Fluorine is oil or water resistant substance, but you can paint other paint like Mr.Color, Aueous Hobby Color or Mr.Weathering Color over this spray.
  

• PL01 and PL02 are pen type cement. It is the limonene type, so it has no irritating smell of solvent and you can use it without worrying about being a nuisance to others.
• There is a standard type pen nib and extra thin type. Use them according to the parts you want to bond.
  

• PL01 and PL02 are pen type cement. It is the limonene type, so it has no irritating smell of solvent and you can use it without worrying about being a nuisance to others.There is a standard type pen nib and extra thin type. Use them according to the parts you want to bond.
  

• Undercoats for metal models and parts to make Mr.COLOR and other AQUEOUS HOBBY COLORS usable for surfaces.
• Paints adhere well and peeling is prevented. Available in bottle and spray.

Method of use

-Mr. single-edged nippers are pliers for plastic models with a blade on only one side.
-The blade is thinly finished, so it is ideal for separating precision parts from the gate.
-With stopper that prevents over-opening/breaking of blades

This product quickly dissolves paint stains on airbrushes, brushes, paint trays, spare bottles, etc. Keeping your tools clean is the best way to become a better modeler.

Dedicated filtering colors have been added to the lineup of Mr.Weathering Color. When this is applied broadly using a flat brush, etc. on a surface painted with basic color and then wiped off lightly with cotton buds, etc., the color tone on the painted surface can be matched and shading or shadowing can be added to enhance 3D appearance.

Brown with high brightness intended to replicate oil stains or rust. It can reproduce the effect of running liquid stains when it is used to draw on the surface.

Special paint for weathering presentation based on oil paint material. Black intended for shadowing or soot is highly versatile. It can be used on its own, but brightness can be adjusted by mixing it with other colors. It is possible to apply this over the base color of Mr. Color, water-based hobby color and Acrysion color.

Special paint for weathering presentation based on oil paint material. Black intended for shadowing or soot is highly versatile. It can be used on its own, but brightness can be adjusted by mixing it with other colors. It is possible to apply this over the base color of Mr. Color, water-based hobby color and Acrysion color.

The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.