Price Clear


Showing 1 - 30 of 238 products


[078] HGUC 1/144 Acguy

MSM-04 Acguy


[050] HGUC 1/144 G-Armor Gundam

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

RM105.60 Add to cart

SD Ex-Standard RX-78-2 Gundam

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.


[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1


[022] HGUC 1/144 MSN-02 Zeong

This plastic model kit of the big mech has moveable everything, including the fingers! The thruster assemblies pivot. Head detaches, and hands detach and can be mounted on bendable cables (included). As usual the parts are pre-colored and snap together. While paint is not required for this model, it certainly would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them.


[059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom

  • [059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom
  • The MS-09R Rick Dom is a mass production space combat mobile suit and a variant of the MS-09B Dom


[386] SDBB RX-105 Xi Gundam

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

  • minovsky craft unit deployment
    Open and close the shoulder and chest armor!
    Flight form can be reproduced by minovsky craft unit deployment gimmick!

  • major armed base addition is also included!
    Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

  • Messer, garsezon included!
    Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

  • eyes switched gimmicks
    By switching the eyes part sides, can be selected without eyes!

  • funnelmisail
    Funnelmisail injection effect parts! Can reproduce the firing scenes!


[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 


P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X2 Kai

From "Mobile Suit Crossbone Gundam", Space Pirate Crossbone Gundam X2 breaks that have been restored appeared in HGUC series!

From "Mobile Suit Crossbone Gundam", to commercialize Crossbone Gundam X2 modified with HGUC series.
Crossbone Gundam X2 breaks distinctive body shape and to reproduce the armed!

● X2 reproduce breaks specific body shape!
And head and blade antenna shape is different from the X1, the part of the back thrusters reproduced in the new shape.

-Head and blade antenna
Reproduce some form of head in the new shape.
Of angle of change shape at the top, blade antenna with features. Aspect design is also reproduced in the mold.

Hive thrusters
The shape of the thrusters tip is to have been large in size and reproduced in the new parts.

● Buster launcher included!
detail a dedicated large weapon Buster launcher of the Crossbone Gundam X2 breaks to be used is also included in the rich new shape.
Total length of about 150mm.

● scissor anchor other, rich comes armed. Weapon dedicated hand parts also enhance.

Comes armed: Buster Launcher / scissor anchor / heat Dagger / beam saber /
Than Buster (beam Zanba / Buster cancer) / brand marker / beam shield

RM155.00 Add to cart

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack


[Limited Production] PG 1/60 RX-78-2 Gundam (Chrome Plated Ver.)

Limited Production : 1/60 (PG) RX-78-2 GUNDAM CHROME PLATE VER


This is Bandai's Perfect Grade 1/60 PG RX-78-2 GUNDAM (CHROME PLATED VERSION!) gunpla model kit. 

The truly amazing limited production for certain countries in Asia. One of the best designed inner frame detail even until today. Everything you ever hope for detail and possibility for this model are achieved! Several little actuators, hydraulic pistons are inclusive in the inner frame as well. 

Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For all true Gundam hobbyist, there's simply no question about whether you should order this. 

This is a LIMITED PRODUCTION kit! Don't miss this!

RM799.00 Add to cart

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X3

P-Bandai Exclusive: HGUC 1/144 Crossbone X3

RM155.00 Add to cart

MG 1/100 Plan303E Deep Striker Gundam


Product size: Approx 21" Long, 11" Tall

Initiate Plan303E! Celebrating both the 30th Anniversary of the photo novel "Gundam Sentinel" and the release of 200 Master Grade kits, Bandai brings to reality the massive mobile suit weapons platform, code name: Deep Striker. Originally existing as a drawing, the S Gundam's theoretical upgrade module for assault operations has never been animated or featured in a story, but has gained massive fame for its heavily armed appearance. 

Over 21" long, this behemoth machine features a massive main gun unit, large radome, I-Field generator and giant boosters and propellant tanks covering its body. New molding is used for the bulk of construction including new pieces for the S Gundam's chest plate, the head, and shoulders that streamline its shoulder to head proportion, and even includes the shoulder sliding gimmick not seen on the original MG S Gundam release. 

A sense of realism and heft are created through mesh piping, chromed pistons, and intricate part separation in the main gun unit and tail stabilizer sections. 

A display stand is included to hold the Deep Striker in all its glory. 

Runner x 39, stickers, marking seals, instruction manual, mesh pipe, screw x 14, wire.

RM780.00 Add to cart



The Zaku II strikes! A mass-produced MS with an abundance of weapons is joining the SD Cross Silhouette series! Utilizing a gray frame, the Zaku II can also combine the with BAN230354 CS Frame (sold separately) to allow for taller proportions! Clear parts are used on the mobile suit's mono eye and includes an articulation gimmick which uses a rail. The iconic Zaku Machine Gun, Zaku Bazooka, missile pod, and Heat Hawk are all included!

  • Zaku Machine Gun x1
  • Zaku Bazooka x1
  • Missile pod x2
  • Heat hawk x1

Set Content:
  • Runner x3
  • Foil sticker sheet x1
  • Instruction manual x1


[OP-05] SD Gundam Cross Silhouette Cross Silhouette Frame [Red]

-Red color appears in the cross silhouette frame with excellent mobility!
-You can make SD cross silhouette taller!

  • Cross silhouette frame [Red] x 1


[OP-09] SD Gundam Cross Silhouette Silhouette Booster 2 [White]

- A luxurious set that further expands the play of existing line-up products.
- Reproduce the wave rider by attaching [SDCS Zeta Gundam] sold separately.
- The Zaku I reproduction exterior can easily reproduce the Zaku I head even with a single item. Dummy parts for the mono eye are also included.
- 2 types of [joint brush-up parts] that can add a swing mechanism to the hip joint are included.
- [Upgraded thigh parts for CS frame] is designed to cover the seams of parts.
- Comes with a general-purpose expression hand and beam saber.

[Accessories included]
- Swing hip joint parts for CS / SD frame x 1 each
- Square thigh parts for CS frame x 2
- General-purpose facial expression hand x 2
- Zaku I reproduction parts x 1 set
- Zeta Gundam Wave Rider Reproduction Parts x 1 set
- Beam saber x 2


HG 1/144 RX-78-2 Gundam [Beyond Global]

-Gunpla 40th Anniversary! The [RX-78-2 Gundam] designed by Kunio Okawara is integrated with the technology cultivated in the [HG Series]!

-Pursue [Beautiful posing] and [Mobility and proportions]. A number of gimmicks are provided throughout the body that allow for natural poses.
-A design that reexamines the design of First Gundam and pursues it to the limit as [BEYOND GLOBAL].
-Adopting forward bending and swinging movable structure on the body. The neck axis is also movable back and forth.
-A joint that bends inward at the base of the thigh to achieve a more human-like pose.
-Independent movement of the wrist allows free movement of the jointed shield.
-The wrist block can be moved as a separate part with a ball joint, and can be used to produce powerful movements such as gripping a fist.
-The hip joint swings and moves greatly forward. In addition, the rear skirt expands greatly, allowing it to move backwards.
-The block on the side of the chest is responsible for the movement of the part corresponding to the scapula.

Beam rifle x 1
Shield x 1
Beam saber x 2
* Foil seal x 1


BB238 Gogg and Acguy and Zock

BB238 Gogg & Acguy & Zock


G-Armor (1/250)

  • G-Armor (1/250) [Product released by Bandai at August 1984]
  • The G-Armor is one of the combined forms of the RX-78-2 Gundam and its support unit, the G-Fighter.


Entry Grade 1/144 RX-78-2 Gundam

  • To celebrate GunPla 40th anniversary, Bandai Spirits has announced the release of the new version of Entry Grade 1/144 RX-78-2 Gundam. 
  • The kit welcomes new variety of gimmicks and style in building GunPla!
  • Compare to other First Grades and any other basic grade models, this kit offers extended articulation and great amount of detailing provided with amazing color separation. 
  • The kit also eliminates the use of sprue cutters, and even the use of stickers.
  • The kit contains 74 pieces that is also provided with easy-build system. Bandai Spirits has molded the parts in the runners in more convenient way!


[NO. 30] FG 1/550 MAN-08 Lalah Sune Mobile Armor

  • MAN-08 Lalah Sune Mobile Armor
  • Release Date: October 1981
  • The MAN-08 Elmeth is a prototype mobile armor the Mobile Suit Gundam television series and the Mobile Suit Gundam III: Encounters in Space movie.


[NO. 22] FG 1/144 MSM-04 Acguy

  • MSM-04 Acguy (Gundam Model Kits)
  • Release Date: August 1981
  • Weight: 120Grams
  • The MSM-04 Acguy is a mass-produced amphibious mobile suit featured in the anime series Mobile Suit Gundam.


[NO. 9] FG 1/144 MS-07 Gouf

  • MS-07 Gouf (Gundam Model Kits)
  • Release Date: November 1980
  • Weight: 120 grams
  • The MS-07B Gouf is a mass production ground close-quarters combat mobile suit.


FG 1/144 RX-75 Gun Tank

RX-75 Gun Tank  in First Gundam Series release in 1981. 

1/144 Scale, best fr collection.


[NO. 42] FG 1/144 MSM-04N Agguy

  • Bandai FG 1/144 MSM-04N Agguy
  • Release Date: July 1982
  • Weight: 300 grams
  • The Agguguy is a mobile suit from the Universal Century timeline. It debuted as part of the official Mobile Suit Variations and made its first animated appearance in Mobile Suit Gundam ZZ.


[NO. 48] FG 1/144 MSM-08 Zogok

  • Bandai [48] FG 1/144 MSM-08 Zogok
  • Release Date: November 1982
  • Weight: 300 grams
  • The MSM-08 Zogok is a prototype amphibious mobile suit from the original design series MSV and made its animated debut in Mobile Suit Gundam ZZ.


FG 1/144 MS-14S Chars Gelgoog

  • Bandai FG 1/144 MS-14S Chars Gelgoog
  • Release Date: June 1981
  • Weight: 300 grams
  • The MS-14S (YMS-14) Gelgoog Commander Type is a commander mobile suit that entered production as the MS-14A Gelgoog.


FG 1/144 MSM-10 Zock

  • Bandai FG 1/144 MSM-10 Zock
  • Release Date: August 1981
  • Weight: 400 grams
  • The MSM-10 Zock was the Principality of Zeon's last amphibious design mobile suit built during the One Year War.


FG 1/144 MS-14 Gelgoog

  • Bandai FG 1/144 MS-14 Gelgoog
  • Release Date: May 1982
  • Weight: 300 grams
  • The MS-14 Gelgoog was a series of mobile suits produced by the Zeonic company for the Principality of Zeon army during the final days of the One Year War and was the first Zeon mass produced mobile suit to carry beam weaponry.


SD Ex-Standard Hello Kitty RX-78-2 and 2 Zaku 3 in 1 Set

Package include 

1. SD Ex-Standard Hello Kitty/RX-78-2 Gundam
2. SD Gundam Cross Silhouette Hello Kitty / Zaku II Principality of ZEON Char Aznable Mobile Suits
3. SD Gundam Cross Silhouette Hello Kitty/ Zaku II

RM250.00 Add to cart

Showing 1 - 30 of 238 products