Price Clear







Modelling Tools

Showing 1 - 30 of 368 products

img
SAVERM4.20

[Metal Part] Mixed Flat Head Screw 3.5 , 4.0, 4.5 each 10 units

  • Package include 30 units of flat head screws for modelling kits, diameter as below
  • 10 units of diameter 3.5 mm
  • 10 units of diameter 4.0 mm
  • 10 units of diameter 4.5 mm
  • Total 30 units
  • Thickness : 1.5 mm

RM9.80
img
SAVERM16.30

MG Strike Gundam Metal Blade Part

  • MG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM23.60
img
SAVERM11.90

MS Option Set 8 & SAU Worker (HG)

- Lupus and Grey-based aircraft with possible combination!
- Versatile, MS option set 8 lineup!

- The contents of goods
- Small Mace (provisional) x 2
- Mulberry (provisional) x 1
- Ice ax (provisional) x 1
Shield (provisional) x 1
- SAU Mobile worker x 1
- Reginreizu frame for the open hand (left and right) x 1
Joint parts x 3

*Gunpla is not included

RM24.00
img
SAVERM23.90

1/144 System Weapon 003 (Gundam Model Kits)

- Start the fun part for further expansion Gundam series!
- By releasing a variety of extension parts, and propose modifications to exhibit examples of Gundam! The Gundam
Rent on the experience gained, the Gundam world, assembling a kit of Gundam and made
The new brand for the enjoyment of the game spread further.
- 2nd part of pre-assembled kit system Weapon series.
- Dedicated rack accessories!
- Parts can be supplied with variation in recombination?
-   Beam rifle ... normal type, J type Gelgoog (machine gun), Anabel Gato only type
-   Heat ... Heat Hawk Hawk Hawk Heat Nagara (for medium-range fighting), large heat hawk
(Strengthen Fight against proximity)

RM48.00
img
SAVERM5.85

[Metal Part] Aviation Hole 2.0mm for HG / MG Gundam model kits - 15 units

  • 2.0 mm outer diameter aviation hole.
  • Package include 15 units of aviation hole for modelling kits customization.
  • Suitable for HG / RG size model kit 

RM7.15
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B5, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B5)

  • Specifications: Maximum diameter 9.5mm, Height 9.0mm, Joint Diameter 2.0mm
  • Thruster Pin : 4.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

    1)Requires drilling works to create a joining point (2.0mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C1,Red) (2 Units)

[Metal Part] Blue Metal Thruster Vents (C1)

  • Specifications: Maximum diameter 6.0mm, Height 6.5mm, Joint Diameter 1.5mm
  • 2 units per package

RM7.80
img
SAVERM6.20

[Metal Part] 5.0 mm Flat Head Armored Screw x 12 units

  • 5.0mm diameter metal part armored screw for armory joints part.
  • Package include 12 units of screw for modelling kits
  • Suitable for MG / RE and PG scales.
  • Thickness : 1.2 mm
  • Joint Part : 2 mm

RM7.80
img
SAVERM6.20

[Metal Part] 6.0mm Flat Head Armored Screw x 12 units

  • 6.0mm diameter metal part armored screw for armory joints part.
  • Package include 12 units of screw for modelling kits
  • Suitable for MG / RE and PG scales.
  • Thickness : 1.2 mm
  • Joint Part : 2 mm

RM7.80
img
SAVERM23.20

[Daban] MG 1/100 Strike Freedom Gundam Wing of Light Option Set

[Daban] 1/100 Strike Freedom Gundam Wing of Light Option Set


Suitable for 
- Daban Strike Freedom Gundam Metal Build alike version
- Bandai 1/100 Metal Build Strike Freedom Gundam

RM56.70
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.5 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.5 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
img
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
img
SAVERM5.50

[Metal Part] Turbine / Turbcharger Screw - 6 units

Turbcharger Screw Metal Parts
- Maximum diameter : 6.0 mm 
- Part Long : 2.0 mm 
- Joint hole diameter : 2.0 mm
- Each set got 1 unit Turbcharger Screw 
- Total 6 sets per pack  

Suitable for Thruster and Vent customization.

RM6.50
img
SAVERM4.80

[Metal Part] 5.0mm Ribbed Shell Screw * 4 units

5.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 5.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
img
SAVERM4.80

[Metal Part] 4.0mm Ribbed Shell Screw * 4 units

4.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 4.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y1, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y1, Gold)

  • Specifications : Maximum diameter 6mm, Height 6.5mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
img
SAVERM4.00

[Metal Part] Energy Cable Tubes Pipes Seamless Type (S Size, 3mm)

3mm S size Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm

Package include
- 20 units Energy Tube Ring
- 1 x 12 cm Spring pipe
 
(This product not include any figure)

RM9.00
img
SAVERM4.50

[Metal Part] Energy Cable Tubes Pipes Seamless Type (M Size, 4mm)

4mm M size Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm

Package include
- 20 units Energy Tube Ring
- 1 x 20 cm Spring pipe
 
(This product not include any figure)

RM9.50
img
SAVERM7.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (S1, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S1)

  • Specifications : Maximum diameter 15.0mm, Height 13mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal parts are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM12.50
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S2, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S4)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10

Showing 1 - 30 of 368 products