- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

• GN drive deployment! Change to the Trans-Am mode!
  
• New generation real SD pose is decided! ! Action is perfect!
  
• It can be equipped with all weapons! !
  

• Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
• In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
• With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
• NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
• Height increases in Destroy Mode.
• Recolored and featuring new details updated from the Unicorn Gundam Ver.Ka.
• Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
• Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
• In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
• With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
• NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
• Height increases in Destroy Mode.
• Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
• Weight : 925g

• Astray has been MG-ed for the very first time! Appearing in [VS Astray], the Astray Blue Frame Second Revise has been released in MG!
• The outer layer slides as the arms parts and the legs parts move accordingly. The shoulder parts and stomach parts gained its large mobility due to the pulling mechanism used.
• Able to improve the variety of poses using the Action Base (sold separately)
• Tactical Arms II (sold separately) can be placed on the base included to take its fighting stance.
• Complete Transformation of the back pack form into the Large Sword/ Gatling Arm.
• The transformation of the Tactical Arms to the Flight Form and Blade Form has been completely reproduced.
• The Gatling Gun and the two blades can be separated. The grip of the sword expands, and can be attached to the elbow side. (Beam also reproduced.)
• Comes with the following: Tactical Arms II (with exclusive action base), Amour Schneider x2
• Copyright Sotsu Agency / Sunrize Weight : 849g

• Accessories: Beam Rifle, Heat Hawk, a dedicated rack parts
  
• P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

• Following the Suit's original designs, the shoulder cape and large range of motion allow this kit to fit into accurate poses and feature dynamic action! 
  
• Huge weapons split into individual elements!
• Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1
  

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

• This full burst mode special version box comes packed with the same MG kit as the normal version of MG Strike Freedom Gundam. 
  
• And this special box include gold coating parts, Dragoon effect parts, a special clear blue base stand, and a clear illustration poster of Strike Freedom vs Destiny. 
  
• Clear stands for each Dragoon are included, which can be attached to the special base stand and display them being sent flying out to its target(s). 
  
• Stickers and custom decal markings are included to detail-up the completed Strike Freedom Gundam kit.Comes with the gold inner frame, unique stand base that able to shoot the beam canon of dragoon system, some hate the stand base, some love it, and notice the 'wing' inner also in gold color, which is pretty cool too. 
  
• One of the similarity feature of strike freedom gundam full burst mode is the combineable rifle on the waist with unique fingers to posture for gun carrying look, this mecha really stand tall and cool among the scale and worth to collect. 
  

• It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  
• Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  
• The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  
• Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  
• Katoki Hajime has designed the markings. 
  
• Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

Superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits. A whopping number of parts are included in the typically-large (and heavy!) box. Besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

Here -  is the HG series kit of the Gundam Virtue in Trans-Am Mode, as seen in the first season of Mobile Suit Gundam 00. The GN cannon barrel can extend, and the connector arm is posable, allowing for dramatic shooting poses from the show. The GN cannon and leg unit sides slide to open into GN field mode. GN bazooka barrel can slide to replicate burst mode. Foil stickers are printed in appropriate colors for Trans-Am mode as well.

Extreme Rare Item !!!The Huge Gunpla set! Over one meter (40 inches/ 100cm) long from the tip of the main gun barrel to the rear fins. It includes with the 1/144 scale GP-03S Gundam. Kit is packed with features, including opening weapons bays, posable claw arm manipulators, two large-size beam sabres, removable I-field generator, micro-missile pod, cluster missile pod, guided bombs and more, display stand.Gundam Unit that's worth collectionTechnical and Historical Notes:During its military reconstruction following the devastating One Year War, the Earth Federation contracted a private company, Anaheim Electronics, to develop a series of new Gundam-model mobile suits to serve as conceptual testbeds for new and improved mobile suit technology. The third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium was composed of two units: the RX-78GP03S Gundam mobile suit itself, code-named "Stamen"; and the large RX-78GP03 Gundam mobile weapon unit, code-named "Orchis." The Orchis was an unmanned unit, and required the Stamen - which itself had a pilot - to be docked with it for it to function. Since the GP03 Dendrobium was designed as a defense unit for space installations capable of taking on enemy mobile armor, the Orchis component was basically a large spacegoing vehicle, equipped with enough thrusters to make it a fast interception unit. Its primary heavy armament was a large mega beam cannon, mounted on its own movable arm for aiming, and it also had two large claws which incorporated large beam sabers capable of slicing up something as large as a battleship. The Orchis also mounted an external I-field barrier generator, giving the GP03 complete 360-degree protection from enemy beam weapons fire. For versatility, it also mounted two large weapons container pods, which could carry a variety of weapons from micromissile launcher pods to battleship-sized demolition chain mines. Spare weapons containers could be loaded out ahead of time, and the Orchis could have empty pods changed out for new ones in a matter of minutes. The GP03S Stamen was completed at Anaheim's Von Braun City lunar factory and delivered to their La Vie en Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. However, with the shutdown of the Gundam Development Project, Earth Federation Forces security officer Nakahha Nakato dismissed all of the Anaheim research staff except for systems engineer Lucette Audevie. With the threat of the Delaz Fleet and the impending colony drop crisis, Lucette strongly argued for the GP03's completion, all to no avail. To face this desparate situation, Gundam pilot Kou Uraki and the crew of the assault carrier Albion literally hijacked the GP03 - with the assistance of Lucette and at the cost of her life - and quickly fielded the Dendrobium, proving to be a devastating foe to the Delaz fleet escorting their hijacked colony falling towards Earth.RX78 + GP03's Extreme battle:

BB-239 Shining Gundam Simple instruction included in a box Weight: 500g

BB-203 Wing Zero Gundam Custom Simple instruction included in a box. Weight: 500g Rare BB Gundam, hurry grab it while stock limited

• BB-288 Strike Freedom Gundam Simple instruction included in a box. 
  
• Weight: 500g The Strike Freedom Gundam gets the SD treatment; with gold-colored polycaps and bright foil stickers for detail, its pre-colored parts all snap together, so no glue or paint is required to finish it. 
  
• A great kit for beginners, or an evening project for more experienced modellers who just want to have some fun!
  

- Also included is a pair of Palma Faciona hands [Shining Finger], comes in white color! - The best thing is the inclusion of transparent pink parts for the wings for its volture lumiere (however you spell it). BB-290 Destiny Gundam Simple instruction included in a box. Weight; 162g

• Serving as both an infiltration and APC unit in the OVA "Gundam Unicorn", this versatile mobile suit can transform between MS and Tank mode and features realistic treads. Armaments can switch between mega machine cannon or long range guns.

• Gundam D-50C Loto Twin Set Simple instruction included in a box. Weight: 339g
  

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 

Accessories: beam rifle, a dedicated base. Simple instruction included in a box.

History:

The Raphael Gundam was first deployed by Tieria Erde during Celestial Being's first attempted contact with the ELS. During this mission, Setsuna F. Seiei used the 00 Raiser Condenser Type and attempted to make contact with the ELS, but his attempt failed and the ELS attacked, with two ELS hitting the 00 Raiser's left arm and beginning to assimilate. However, Tieria arrived in the Raphael to assist, forcibly ripping off the 00 Raiser's left arm and saving the rest of the machine from assimilation, allowing Celestial Being to escape. Raphael's second deployment was during Setsuna's second attempt to communicate, this time using a combination of the Raiser System and Trans-Am to produce a Trans-Am Burst-like effect and expand his quantum field of communications. However, the ELS reacted violently and delivered a crippling mind attack to Setsuna, rendering him comatose and leaving the 00 Raiser open to assimilation. In his desparation to save Setsuna, Tieria quickly revealed the true form of Raphael's backpack, GN-008RE Seravee Gundam II. Using his quantum brainwaves, Tieria used the Seravee to forcibly rip the 00 Raiser's cockpit from the rest of the machine. After handing the cockpit to Lockon Stratos in the GN-010 Gundam Zabanya, Tieria took it upon himself to hold off the ELS long enough for Lockon to escape with Setsuna. However, even with his quantum brainwaves, the Seravee, and Raphael's Trans-Am System activated, Tieria was eventually overwhelmed by the ELS and suffered a mind attack of his own, leaving both the Raphael and the Seravee open to attack. Tieria's physical body, the Raphael and the Seravee were assimilated along with the 00 Raiser, forcing Tieria to return to Veda.

• Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
• Both frame and armor are completely rescupted with revised proportions! 
• It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
• Its wing and beam cannons flex for full burst mode, as well. 
• A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.