There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 

This "ground pounder" carries a backpack (could hold a car) which opens for weapons storage. Cockpit armor panels fold down. Includes an unpainted figure of Pilot Shiroh Amada. The instruction book is 19 pages and includes a "Documentary photographs" page, and painting guides. Weapons include Beam Rifle, 10mm Machine Gun, Hyper Bazooka (Ground Type), Beam Saber and Shield.

• 4th Platoon immortal] Jim Cannon II on the HGUC sortie! 
  
• Completely reproduce a serious, dignified form. 
  
• Camera head is clear and reproducible. 
  
• Beam Cannon is moving 90 degrees. 
  
• Reproduce the sword saber storage. 
  
• Various hand parts are included. 
  

Item Size/Weight : 31.2 x 19.1 x 8.2 cm / 375g

[016] HGUC 1/144 MS-14F Gelgoog Marine

-Jim Custom, which was operated as a dedicated aircraft for the ace and pilot of the Federal Army during the Dellers conflict, appeared on ver. ANIME with various equipment such as gym rifles!

-High-performance mass-produced aircraft whose overall performance has been upgraded by the Augusta Research Laboratory after the one year war.
-Adopts Gundam NT-1 parts and Gundam class generators.
-During the Dellers conflict, the aircraft was deployed to the Albion Corps as an ace-pilot-only aircraft, and engaged in numerous death battles.

-ANIME-movable
The chest uses retractable armor. The poses with the arms turned inward are reproduced naturally.
The legs can be flexibly posed by a hip swing mechanism, a retractable joint on the back of the knee, and a pull-out joint on the heel.

-ANIME-Option
The equipment includes a typical gym rifle, a bullpup machine gun, a beam saber, and a shield.
Attached spare magazine can be attached to the back of the shield.
Rifle effect and vernier effect make it possible to produce realistic effects.
The shield can be equipped with joint parts to adjust the equipment position according to the scene.
A gym rifle can be mounted on the back.

-ANIME-interlocking
[ROBOT soul RGM-79C Gym Kai ver. ANIME] (sold separately) The included Hyper Bazooka can be suspended from the back.
[ROBOT soul MS-06S Char's Zaku ver. ANIME] (sold separately) The attached effects are linked between the series, enabling realistic reproduction in the play.

-[Gundam Development Plan] A secret agreement aircraft [Gerbera Tetra], which was disguised as a base of the phantom prototype No. 4 and transferred to the Delers Fleet, is now available in ver.ANIME!

-Anaheim Electronics\' assault aircraft [Gundam Prototype Unit 4 Gerbera] originally developed in the [Gundam Development Plan]. The exterior was changed and disguised as a Zeon-type aircraft because the approval of the federal army was not obtained. It was renamed Gerbera Tetra and transferred to Cima Garahau of the Delers Fleet.

-Includes a Sturm booster that is as tall as the MS itself. By the replacement, a more voluminous silhouette appears.
-Faithfully reproduce the unique form and coloring that stands out even in the main story.
-A glamorous body line composed of curved lines such as a large vernier on the shoulder.
-Equipment comes with a beam machine gun, and beam effect parts that reproduce high power can be attached.
-A Sturm booster can be attached to the back. In addition, the propellant tank can be attached and detached.
-Vernier effect parts can be attached to the shoulders and legs as well as the Sturm booster.
-[ROBOT soul Effect parts set 2 ver.ANIME] (sold separately) can be linked to reproduce a powerful battle scene.

[set content]
? Main body
? Sturm booster
? Propellant tank x 2
? Beam machine gun
? Beam saber unit x 2
? Replacement wrist left and right 4 types each
? Wrist storage deck
? Various effects

• The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  
• Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  
• The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  
• Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model.
  

Bandai's newest PG offering is truly deserving of the name "Perfect Grade," and it's also a two-in-one; you can build it as either the GP01 or the GP01Fb! Like previous Perfect Grade kits, this behemoth offers a level of detail and motion that's far beyond what you see in even the biggest Master Grade offerings. Panels and hatches all over the surface open, to reveal inner mechanical details. What's more, after you get done wading through over two dozen runners of literally thousands of parts, you'll have armament for the GP01 including two 60mm Vulcans, two beam sabers, and a beam rifle, as well as the Core Fighter II. For the GP01Fb, there are two extra beam guns, and you can build the Core Fighter II Fb. But that's not all -- the kit also includes the parts to build a hangar/dock (see photos below), with little figures of maintenance workers to position around it! A bonus card with a serial number on it also included. Act now, and add this beauty to your Perfect Grade collection (and don't forget to budget for the shipping costs, this item weighs 5kg/11 lbs.)!

The massive weapons Gundam featured in Mobile Suit Gundam 0083 Stardust Memory has joined the SD model kit series. The GP03 Stamen is removable from the huge burner setup, and it also comes with two beam sabers, beam rifle, bazooka and shield. 

A souped up GM Type C from Gundam 0083 Stardust Memory, its bulky appearance has been faithfully recreated.

• The RGM-79C GM Type C (aka GM KinsertUnorderedListai) is an improved version of one of the Earth Federation's first mass production mobile suit, the RGM-79(E) GM Early Type. It first appeared in Mobile Suit Gundam 0083: Stardust Memory.
  
• Weapons:
  
• Vulcan Gun
  
• Beam Saber
  
• HFW-GR·MR82-90mm Machine Gun
  
• HFW-GR·MR82-90mm GM Rifle
  
• 360mm Hyper Bazooka
  
• Shield
  

• The distinctive Strum Boosters on the back are reproduced. 
• Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
• The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
• An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
• Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

P-Bandai Exclusive: 1/144 HGBF Gerbera Tetra (Kirara Custom)

*** PRODUCT SPECIFICATION***

• 1. Head Height : 260MM
• 2. Height : 285MM
• 3. Depth : 151MM
• 4. Mega Cannon Length : 324MM
• 5. Mega Shield : 240 x 130MM
• 6. Plastic parts : Approx~ 1650 pcs
• 7. Maintenance valve : 55
• 9. Valve metal hinges : 19
• 10. LED = 28
• 11. Power Control Unit
• 12. Specified Platform and Stand Bundled
• 13. Premium Exclusive : Heavy Laser Rifle bundled

Here's the Mobile Armor flown by Kelly Lazner in Gundam 0083 against the GP01Fb. Posable arms. Comes with display stand and two tiny-little 1/550 scale replicas of the GP01Fb and GP-02 (both unpainted).