MS GUNDAM UNICORN

Showing 1 - 30 of 158 products

img
SAVERM95.90

MG 1/100 RGZ-95 ReZEL Gundam

- Based on the design of the Zeta Gundam, this mass produced MS is the next step in the Federation's MS army ! 

- Transformation mechanism accurately recreates this MS's shift into Wave Rider form while preserving the Suit's unique proportions!
* Wave Rider form grants heightened mobility and speed!
- Plus one gimmick and armed mechanism included.
- Full weapons system! Mount the Beam Rifle saber bayonet, access the arm-mounted Beam Saber storage. Beam Saber magazines are detachable, and extra magazines can be stored in the shield. 
- Includes all the details that we've come to expect from a modern MG!
* Rear Windshield reproduced in transparent elements. 
* Cockpit hatch opens, and scale pilot figure included.

- Accessories: Beam Rifle, Beam Saber x 2, Shield
Item Size/Weight : 39.2 x 31 x 8.3 cm / 814g

RM192.00
RM192.00 Add to cart
img
SAVERM15.90

[365] SDBB Sinanju

- SD weight of the volume while Shinanju appeared very suitable for MS! - SD in if you are a full Pureibaryu! - Moving from side to side mono eye look and move! - SD original! Respectively variations in upper and lower body Bisutomodo! - Parts Weapon rich! - SD completely reproduce patterns while the combination of weapons. - Accessories: A-xe beams x 2, beam rifle, grenade launchers, shields, Beam saber, pedestal

RM40.00
img
SAVERM108.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM220.00
RM220.00 Add to cart
img
SAVERM35.90

[134] HGUC 1/144 Unicorn Gundam 02 Banshee (Destroy Mode)

  • The second Unicorn Gundam "Banshee" from "Mobile Suit Gundam Unicorn" episode 4 joins the HGUC lineup. 
  • The new armaments seen in the episode 4 are included. 
  • The psycho frames can be seen through the armor.

RM72.00
img
SAVERM31.90

[138] HG 1/144 Marasai Gundam

  • The UC version マラサイ of the Xeon army specification! 
  • Reproduce マラサイ which appeared by episode4 in a green molding color. 
  • The フェダーイン rifle of new modeling is attached. The Spear state is also reproducible. 
  • Reappearance of an ejection state is possible for the one` sea snake ` of armaments at a lead. 
  • Accessories : フェダーイン rifle and beam saber x2, a sea snake Item Size : 31 x 19 x 7 cm
Wikipedia's information
The RMS-108 (MSA-002) Marasai is a second-generation Mobile Suit in the Universal Century timeline. It first appeared in the series Mobile Suit Zeta Gundam.

The RMS-108 Marasai was developed using Zeon design principles combined with technology pioneered by the Earth Federation during the One Year War. Technologically based on the RMS-106 Hizack the Marasai features improved technologies, such as a movable frame , Gundarium Alloy armor instead of a titanium alloy that improves overall defense, greater sensor range, greater acceleration, and a more powerful Minovsky type ultracompact fusion reactor. It is equipped with high-power thrusters that allow atmospheric flight under gravity for a short period of time. 

Alongside its technological improvements the Marasai is also several metric tons lighter than Hizack when measuring its empty weight. The Marasai did not have as a large a weapon selection as the Hizack, however that would be because the Hizack was often equipped with older weapons used by Zakus, such as machine guns and heat hawks, while the Marasai used only advanced beam weapons. The Marasai was also compatible with the ballute system if it needed to conduct and atmospheric reentry on its own.

The standard Marasai's weapons were a rapid-firing beam rifle capable of shooting three beams in rapid succession, a beam saber, and two head mounted Vulcan guns on the sides of its head. A large shield was attached to the right shoulder, much like Zeon's Zaku line of mobile suits.

Originally designed by Anaheim Electronics for the Anti Earth Union Group as the "MSA-002", it was designed to be an all round better version of the RMS-106 Hi-Zack. However, due to pressure from the Titans, Anaheim presented them with the design when the Titans started to turn their attention towards Anaheim support of the AEUG. It was formally adopted and put into mass production as the "RMS-108", being the eighth machine developed at the Granada base.

Many pilots used Marasai's in the Titans and EFSF, most famous is Kamille Bidan's rival, Jerid Massa. While defending the Earth Federation base Jaburo, Jerid's Marasai fought with the RX-178 Gundam Mk-II before being destroyed. Other pilots of the Marasai include Kacricon Cacooler and Sarah Zabiarov. Kacricon was killed in a Marasai by Kamille Bidan, who destroyed his Ballute, causing him to burn up in the atmosphere.

Despite initially being used by an organization whose very duty was to seek out and destroy anti-Federation or revivalist Zeon movements, after the Gryps Conflict the Marasai would be used almost exclusively by Neo Zeon movements. After the Gryps Conflict ended, the Earth Federation sought to distance itself from connection to the Titans, which included abandoning numerous mobile suit designs that were used by the Titans (no matter how effective they were). The abandoned Marasai were picked up by the first Neo Zeon, Haman Karn's Zeon, who used the machines to fill out their ranks. After the First Neo Zeon War many of the Marasai had been destroyed. Some of those that survived would be used by old Principality of Zeon remnants, who would repaint the Marasai in their own distinctive green color scheme.

During UC 0096, several of the RMS-108 were used by Zeon remnants to attack the Federation's Torrington Base. One of these units would later be destroyed by the RX-160S Byarlant Custom. Another one of these units were destroyed by regrouping Earth Federation forces during the Federation counterattack.

Weapons
  • Beam Saber - Stored on the shield when not in use, this particular beam saber has a noticeably longer handle compared to others.
  • Vulcan Gun - A pair of Vulcan guns are mounted into the Marasai's head. These projectile weapons are designed for intercepting missiles and destroying lightly armored vehicles.
  • BR-87A Beam Rifle - A standard armament for ranged combat. The rifle used by the Marasai was unique in its ability to change its rate of fire.
  • Shield - Mounted on the right shoulder, this weapon serves as the Marasai's primary means of defence and is also used as a storage rack for its beam sabers.
  • Feyadeen Rifle/Beam Saber
  • Sea Serpent - Originally used by the RX-139 Hambrabi, this weapon was used by one particular Marasai unit during the Zeon attack on Torrington base.

RM64.00
img
SAVERM83.83

[136] HGUC 1/144 Delta Gundam

- Appear in the game for PS3 "maneuver warfare GUNDAM UC"! The true figure of 100 formulas, formation of variable MS "delta GUNDAM" HGUC! 

- The gorgeous kit by whole body optical 輝く plating finish! - Reproduce the same golden armoring as 100 formulas by the plating part which shines. Two beam sabers besides the possibility of modification by a substitution part, a large-sized rifle, and a shield are attached, and it is also play value. バツグン! 
- It is full reappearance about a flight form (wave rider) with a substitution part! 
- An action pause is also free by the wrist part of a rich expression, and a broad movable region! 
- MSN-001 Delta GUNDAM -- Variable MS which considers the visual book "GUNDAM MS グラフィカ" as the first appearance. The figure which golden MS "100 Formula" originally aimed at. It is supposed only with design data that construction is not carried out. 
- Accessories : shield, beam rifle, and beam saber x2, the wrist for sabers (right), the wrist for rifles (right), an open hand (right and left), a grip hand (right and left) Item Size/Weight : 31.2 x 19.2 x 9 cm / 404g

RM168.00
RM168.00 Add to cart
img
SAVERM29.90

[123] HGUC 1/144 Jegan (ECOAS Type)

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a general-purpose special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. Includes Bazooka, Beam Saber, Beam Rifle, and a shield. Visor on head can also slide down to recreate appearance when using its more powerful cameras.


Accessories: 
- Beam saber
- General bazooka
- Beam rifle
- Shield 

- Item Size/Weight : 31 x 19.2 x 7.2 cm / 318g

RM66.00
img
SAVERM51.90

[148] HGUC 1/144 Gundam Delta Kai

  • Accessories
  • Long Mega Buster, shield, high-Mega Cannon, proto fin funnel x 2, Beam saber x 2, saber grip (left and right), fist (left and right), rifle grip (right). 
 
According to wikipedia 
The MSN-001X Gundam Delta Kai (pronounced 'Kai') (aka ? Kai or ??) is a prototype transformable mobile suit developed from the MSN-001 Delta Gundam as a technology demonstrator. It appears in the PlayStation 3 video game Mobile Suit Gundam UC (The Postwar) and UC-MSV. In overall appearance, the Gundam Delta Kai is an enhanced version of the Delta Gundam, which incorporates new technologies that can be used for future mobile suits. It also has a specialized Psycommu system installed called the Nitro System, which grants an ordinary pilot Newtype abilities. The Gundam Delta Kai is also armed with standard vulcan guns, a long mega buster, two beam sabers and a shield. But also equipped with two fin funnels on its back.
 
Weapons 
  • Vulcan gun: The vulcan gun has been a standard armament of Federation suits since the One Year War. While not very powerful and typically unable to penetrate mobile suit armor, the vulcan gun is useful in intercepting missiles/rockets, destroying mobile suit sensors, and engaging lightly-armored targets such as tanks and small aircraft. 
  •  Long Mega Buster: A specialized Beam Rifle with a power output comparable to a beam cannon. It was developed from the RX-78-4 Gundam Unit 4 "G04"'s Long Beam Cannon. 
  • Beam Saber: The Delta Gundam Kai's close combat armaments. It is able to melt through most armor and destroy most mobile suits in one strike. 
  • Shield: The Delta Gundam Kai's defensive armament. It doubles as the unit's forward section in waverider mode. 
  • Fin Funnels: The Delta Kai mounts two Proto Fin Funnels on its back.

RM104.00
RM104.00 Add to cart
img
SAVERM139.90

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the -  ??Red Comet, -  ?? Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM280.00
RM280.00 Add to cart
img
SAVERM148.90

MG 1/100 MSN-06S Sinanju

  • Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  • The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
  • Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
  • The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
  • With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".

RM300.00
RM300.00 Add to cart
img
SAVERM21.90

[158] HGUC 1/144 Base Jabber Type 89

  • Accessories: one corresponding joint action based

RM50.00
img
SAVERM39.90

[175] HGUC 1/144 Unicorn Gundam 02 Banshee Norn (Destroy Mode)

  • The RX-0[N] Unicorn Gundam 02 Banshee Norn (aka Banshee Norn) is an upgraded variant of the RX-0 Unicorn Gundam 02 Banshee that appears in the OVA version of Mobile Suit Gundam Unicorn. The unit is piloted by Riddhe Marcenas.
  • Accessories: Beam Magnum (with revolving launcher), beam Jytte, Armed Armor XC (expanded state), Armed armor DE (unfolded state), ( -  ?? no blade) x? 4, rifle handle, grip hand x? 2 (left and right) beam saber.

RM80.00
img
SAVERM22.00

[Gao Gao] 015 MG 1/100 SINANJU Ver.Ka

Daban version of MSN-06S Sinanju Ver.Ka

Brand : GaoGao
Country made : China
Code : 015

Please note that this is not Bandai products

Ver.Ka Series: VI Designed and produced by Katoki Hajime 
Total parts count: 454pcs 

Features an accurate rendition of the Sinanju's distinctive organic appearance. The large backpack unit incorporates a sliding feature that moves the external armor when the thrusters are opened. Leg units incorporate flexible thruster units. Features a detailed cockpit with an opening hatch. The head unit incorporates a linked mono-eye mechanism that moves along with the head. The complex form of the shield is rendered with total accuracy. The inside of the shield has a mounting arm for storage of a beam axe. Shield-mounted grenade launcher can be detached and re-attached to the rifle. Includes individual grenade units. Beam Saber and Beam Axe incorporate large "effect parts" molded in translucent yellow. Includes a detailed history of the Mobile Suit and story, written by the editorial staff of Gundam Ace magazine, which is serializing the Gundam Unicorn novel. Includes Gundam Decal markings. Gold highlights can be rendered either with stickers or optional water-slide versions decals.  

Weight: 1120g

RM128.00
RM128.00 Add to cart
img
SAVERM251.90

MG 1/100 Unicorn Gundam 03 Phenex

  • The RX-0 Unicorn Gundam 03 Phenex is a mobile suit that appeared in Mobile Suit Gundam UC: One of Seventy Two, a short animation feature at Gundam Front Tokyo's "DOME-G" on August 3, 2013. It is based off a short story written by Gundam Unicorn's author, Fukui Harutoshi. To celebrate this short animated feature, Bandai Hobby produced a limited Gundam Front Tokyo HG model kit of this design.

RM468.00
RM468.00 Add to cart
img
SAVERM63.90

[178] HGUC 1/144 Full Armor Unicorn Gundam (Destroy Mode)

  • From Mobile Suit Gundam Unicorn comes the titular suit in its Full Armor configuration!
  • Armed Armor DEs can be mounted separately or in their tri-weapon formation using included display stands!
  • Psycho frame is molded in clear green part to create the Awakened Unicorn Gundam!
  • Beam Gatling Guns are included to complete the Armed Armor DEs!
  • Accessories: Hyper Bazooka x2, Beam Magnum, Beam Saber (Hilt) x4,
  • Beam Saber (Blade) x2, Anti-Ship Missile x2, Grenade Launcher x2,
  • Hand Grenade Rack x4, Beam Gatling Gun x6, Shield, Armed Armor DE x3, Large Booster x2, Grip Manipulator x2 (Left and Right)
Item Size/Weight : 31 x 20 x 13.3 cm / 665g

RM128.00
RM128.00 Add to cart
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn 03 Banshee Norn

[Daban] 1/60 Banshee Norn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai product

RM350.00
RM350.00 Add to cart
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn Fighter

[Daban] 1/60 Gundam Unicorn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM350.00
RM350.00 Add to cart
img
SAVERM10.90

SD Ex-Standard Banshee Norn

SD Ex-Standard Banshee Norn

RM25.00
img
SAVERM10.90

SD Ex-Standard Sinanju

SD Ex-Standard Sinanju

RM25.00
img
SAVERM10.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam

[Daban] PG 1/60 Phenex Gundam Unicorn

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM450.00
RM450.00 Add to cart
img
SAVERM25.00

[Daban] 6642 MG 1/100 Phenex Gundam

[Daban] 6642 MG 1/100 Phenex Gundam
Series: Gundam
Grade: MG
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Product

RM135.00
RM135.00 Add to cart
img
SAVERM209.00

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]


- The biggest model in the series with the largest appearance!
- Overall height about 452 mm !! Mega size model maximum size! Feel the giant feeling of the real thing with the plamo according to the topic of standing up!

- POINT 1: Mega Size Series Maximum Size!
Mega size unicorn Gundam boasts overwhelming size. The total height is about 452 mm and the biggest size in the mega size series history.

- POINT 2: adopt shading mold
Part of the shoulder armor and other parts of the body Adopted a shading mold at key points. It emphasizes the shadow by sculpting the mold deeper than in the past, just to assemble it into a three-dimensional sense just like in the play.

- Attached weapons
Beam magnum and shield of the same scale are included. Beam · saber blade effect is attached to both arms to reproduce beam · tofer.

- Accessories: Beam · Magnum x 1, Shield x 1, Beam · Saber x 2

RM390.00
RM390.00 Add to cart
img
SAVERM75.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam


- GUNPLA EVOLUTION PROJECT 2nd volume !!
- Unicorn Gundam is awake now, with a form pursuing reality and transformation gimmicks reproduced at 1/144!
- Unicorn Gundam is made into RG with a mechanism based on original setting consideration and real detail. [Transform] is realized for the first time on 1/144 scale by [Advanced MS Framework].

[EVOLUTION POINT `TRANSFORMATION (transformation)`]
- Create a product that will become Gundam's next-generation standard [GUNPLA EVOLUTION PROJECT]. EVOLUTION POINT in the second project [RG 1/144 Unicorn Gundam] is `TRANSFORMATION`. Realized transformation beyond the limit within the constraints of 1/144 scale.

[ADVANCED MS FRAMEWORK]
- A new framework developed to embody the Unicorn Gundam as RG. By "Advanced MS Framework" equipped with three gimmicks, [Advanced MS Joint], [Lock Mechanism], [Link Mechanism], we realize high stability after assembly and compatibility of movement of each part.

- 01: New frame pursuing a transformation mechanism [Advanced MS joint]
I thoroughly examined the transformation to the destroy mode, and created a new frame. It is the new design pursuing the transformation mechanism, [Advance MS joint] which is responsible for its center.

- 02: Precise locking mechanism to lock parts when transforming [lock mechanism]
Besides the armored part of the external forearm, locking mechanism for fixing parts after transformation is installed in various places. Realize high stability after transformation.

- 03: RG original proprietary [link mechanism] to reproduce a smooth transformation
The characteristic leg leg transformation of Unicorn Gundam is reproduced with a new [link mechanism]. This mechanism enables smooth transformation while alleviating the assembly process.

- Precise reproduction of weapon deployment. In addition to deployment of the psycho-frame of the shield, the cartridge detaching mechanism of beam ? magnum is reproduced.

- Accessories: Beam ? Magnum x 1, Beam ? Saber x 2, Hyper ? Bazooka x 1, Shield x 1

RM152.00
RM152.00 Add to cart
img
SAVERM99.50

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka

Unicorn Gundam Ver. Ka again - Unit 2 Banshe finally rolled out with Ver.

- Change psycho frame to clear yellow.
- Changing colors according to the molding color, Ver.Ka unique marking water transfer decal included.
- Besides Beam -  · Magnum and Shield, weapons parts such as Hyper -  · Bazooka are enriched.

[accessories]
- Beam . Magnum x 1
- Shield x 1
- Hyper  bazooka x 1
- Beam saber x 2

[Product content]
- Molded article x 22
- Foil seal x 1
- Water transfer type decal x 1
- Instruction manual x 1

RM200.00
RM200.00 Add to cart
img
SAVERM109.40

[218] HG 1/144 Narrative Gundam A-Packs

As seen in "Mobile Suit Gundam NT," the mighty Narrative Gundam appears with its super-large "A" equipment pack! The weapons can be worn on its regular body, and an action gimmick for the Chest Expansion is also included. The hip joints feature extra-wide action for full leg movement, and stands are included to keep the huge armaments supported. Includes foil stickers for the markings. 


Accessories: 

- Beam saber (x2)
- Large beam saber (x2)
- Display base
- Cannon base (x2)

RM220.00
RM220.00 Add to cart
img
SAVERM19.90

[12] SDCS Gundam Cross Silhouette Unicorn Gundam (Destroy Mode)

A unicorn Gundam focused on [Density, Easy to Assemble, Moveable] appeared from SDCS!

-Characteristic psycho frame-reproduced in clear parts. High-satisfaction molding that condensed the charm of Unicorn Gundam!
-By rearranging, you can select the presence or absence of the pupil.
-Beam magnum, beam saber, shield included.
-By linking with the CS frame (sold separately), it is possible to reproduce high headed body and high movable form. You can enjoy it with your favorite proportions!

[accessories]
? Beam Magnum x1
? Beam saber x2
? Shield x1

[Item content]
-   Molded articles x 5
? Foil seal x1
? Instruction manual x1

RM40.00
img
SAVERM111.50

[DABAN] MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]

Model : RX-0 Unicorn Gundam [Destroy Mode]
Scale : 1/48 MEGA SIZE
Brand : Daban

Note : Please note this is not BANDAI brand

This package does not include Assembly Manual hard copy. Please download the link provided below:

RM188.00
RM188.00 Add to cart
img
SAVERM497.70

MGEX 1/100 Gundam Unicorn Ver Ka

Gunpla 40th anniversary ! High-end brand is born in MG !

- [MGEX] is a new brand that challenges the "extreme expression" of MS, based on the technology accumulated by BANDAI SPIRITS and the [theme] set for each aircraft by combining different materials.

- The first theme is [Extreme `light emitting mechanism`]. The [structure] that has been calculated thoroughly and the expression of [light emission] by the new LED unit.
- From the lighting of the eyes and the main camera of the head by button operation, the psycho frame of the main body emits red and green, and then it is possible to produce a light emission with strength.
- The newly adopted [flexible LED sheet] realizes easy assembly and space saving. With this technology as the starting point, Unicorn Gundam\'s first ever transformation, light emission, color change, and movable symmetry are realized.
- Producing the whole body with new molding under the full supervision of Mr. Hajime Katoki.
- Using the lead wire, it is possible to light the clear parts of the shield placed away from the main body.
- Includes water transfer decals including the new original plastic model design.
- The dedicated MS cage also houses the battery box of the lighting unit, adjusts the position of the columns, and has a weapon holding function.
- 3 AA alkaline batteries (sold separately) are required to reproduce light emission.

[accessories]
* Beam magnum x 1
Hyper Bazooka x1
Shield x 3
Beam Gatling gun x 6
Beam saber x 4
Lighting unit x 1 set
Exclusive MS cage x 1
Water transfer type decal x 1
Metallic seal x 1

RM880.00
RM880.00 Add to cart
img
SAVERM79.20

P-Bandai: HGUC 1/144 Gundam TR-1 Hazenthley Rah II

Premium Bandai continues the Advance of Z series with the Gundam TR-1 in its Haze'n Thley Rah II form! This kit shares the same molds with the HGUC 1/144 Advanced Hazel extended with variety of AOZ mobile suit equipment, starting from Owsla style armor chest piece, to its HRUDUDU II side armor expansion parts.
This kit also comes with a "Psycho Blade" system which is entirely new mold for the AOZ series model kits.
The kit is also completed with its weapons! From its Composite Shield Booster, Beam Rifle, to its Beam Saber.

RM400.00
RM400.00 Add to cart
img
SAVERM24.90

SD Unicorn Mecha Perfectibility SD Gundam Unicorn Perfectibility

QY SD Unicorn Mecha Perfectibility


Brand: QY/Mecha Unicorn (China Brand)
Grade: SD
Series: SD Gundam

Kindly note that this is NON-BANDAI product and action base/stand is not included.

RM35.00

Showing 1 - 30 of 158 products