Third Party HG 1/144 GTO Gundam The Origin

00 mobile soldier Gundam last battle. It appears in 0 BB soldier Gundam final decisive battle specification. The play inside image display is reproduced with the GN particle effect parts. 

• GN drive deployment! Change to the Trans-Am mode!
  
• New generation real SD pose is decided! ! Action is perfect!
  
• It can be equipped with all weapons! !
  

Cute, deformed version of the Strike Gundam. Kit is molded in color (stickers are included for detail areas with differing colors), and features snap-fit assembly. Limited poseability. Stands about 5cm tall when completed. Comes with beam rifle, shield, and Armor Schneiders. AVAILABLE NOW!

• Metallic coating Ver with feeling of luxury and weight feeling . 
  
• New hyper bazooka that 6, fin funnel × beam rifle, and 2 and beam saber × is shielded. 10 molded piece × foil seal, and marking seal.
  

• From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  
• With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  
• Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  
• Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  
• Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  
• Center chest and “eye” cameras light up using included LEDs (batteries required)
  
• Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 
  
• 
  
• Accessories: Accessories: Twin Buster Rifle, Beam Saber x2
  

• To commemorate the release of the "Gundam Unicorn" animated movie Bandai is releasing a newer, better, most glorious MG Unicorn called the Unicorn Gundam with Cage! 
  
•  This isn't just a new paint scheme; Bandai have totally redone this kit. New body color. Fully transformable. Head redesigned, including vulcans, to match the animated version. 
  
• Mobility of the hips is now 360 degrees & Knee joints have 150% more articulation! An additional antennae for destroy mode. 
  
• Customize cage included that can store extra parts while beam saber can be stored at the back of the base. Cage can be attached to the Action Base 1, all arms are movable. 1/100 figures: Audrey, Banagher, Cardeas, and Marida included! 
  
• Included weapons will be the Beam Magnum (with magazine), Hyper Bazooka, Shield, Beam Saber and select antennae.
  

• An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  
• Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  
• Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  
• Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  
• Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.
  

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

• It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  
• Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  
• The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  
• Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  
• Katoki Hajime has designed the markings. 
  
• Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

Superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits. A whopping number of parts are included in the typically-large (and heavy!) box. Besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

BB-212 ZZ Gundam Simple instruction included in a box Weight: 220g

BB-221 Guntank Simple instruction included in a box. Weight: 500g

BB-225 Gun Canon Simple instruction included in a box. Weight: 500g

• BB-231 Zaku II (Char Custom) Simple instruction included in a box. Weight: 500g
  

BB-273 BB-273 Gundam RX-78NT-1 Simple instruction included in a box Weight:148g Rare BB Gundam, hurry grab it while stock limited. Super little super-deformed Gundam, molded in coloured plastic and featuring snap-fit assembly. Great for younger modellers, beginner modellers, or anyone who just wants to keep his or her hands busy for a while! Foil stickers are included for decoration.

• Up to reproduce the features of the G Gundam series action poses with the new action frame.
  
• By entering the body of the chest unit to reproduce the arms folded pose.
  
• Master Cross (weapons), with figures of Master Asia.
  

• Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  
• You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  
• The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1
  

• Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
• Both frame and armor are completely rescupted with revised proportions! 
• It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
• Its wing and beam cannons flex for full burst mode, as well. 
• A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

Accessories: 6, funnel × beam shot rifle, 2, beam saber × beam Tomahawk, and shield

• Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  
• Zeta Gundam, the best of both models. Gimmick Built-parts issue.
• Expand the abdomen and the head cover in conjunction with mobile chest.
• Work together to deploy a dedicated beam rifle scope barrel / grip /.
• Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
• Deformable skeleton (full frame mover) in combination with external armor
• Pursued the reality of the Mobile Suits.
• Combined with a snap-fit \u200b\u200bassembly and service.

The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.