• RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
• RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
• As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
• Zeta Gundam appeared -.
• The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
• Adopt a new joint MS Advanced mode.
• Comes with realistic decals.
• Accessories: beam rifle, shield, grenade x 2, beam saber x 2,
• Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

• Item Size/Weight : 31 x 20 x 9.3 cm
  
• Weight: 552g
  
• Accessories: beam rifle, shield, New Hyper Bazooka, Beam Saber
  
• Comes with installation manual + snap & fit.

• Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  
• The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
• Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
• The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
• With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".
  

Third Party Brand The Witch from Mercury HG 1/144 Aerial Rebuild

• Designed after the modern version of the iconic Sazabi, this eagerly-awaited BB kit is renewed for the first time in 25 years!
  
• Detail reproduction escape pod!
  
• Includes funnel ejection effect parts!
  
• Comes with Tomahawk beam effects!
  
• Gimmick allows mono eye to move from side to side!
  
• Funnel container recreated.
  
• Includes huge beam-Shot rifle!
  
• Beam tomahawk mounts to shield!!
• Accessories: Beam-Shot Rifle, Shield, Beam Tomahawk (with Beam Effect),
  
• Three Ejected Funnels, Funnel Ejection Effect Parts
  

[006] HGUC 1/144 MSM-07 ZGok Mass Production Type

[084]HGUC 1/144  Jagd Doga (Quess Ea Use)

The MSN-04 Sazabi is a fictional mobile suit designed by Yutaka Izubuchi for the anime movie Char's Counterattack; it has also appeared in titles including, but not limited to, the Super Robot Wars series of strategy games, the Gundam: Battle Assault series of fighting games, the PlayStation 2 titles Climax U.C., MS Saga and A.C.E. It is utilized by movie and timeline antagonist Char Aznable.

Following the establishment of the second Neo Zeon movement, Char Aznable commissioned Anaheim Electronics to produce a custom-designed mobile suit specifically for his personal use. Painted in a darker and brighter red color with respect to his previously used Zaku II, which presented a tonality tending to a dark pink somewhere, Char utilized the Sazabi as a front-line combat unit to personally lead Neo Zeon mobile suit forces against the Earth Federation Space Force and its Londo Bell subsidiary.
Despite its large size by mobile suit standards, the Sazabi maintains a high level of maneuverability due to a proportionally-high number of maneuvering verniers and lightweight armor materials. It is also heavily armed, including a powerful mega particle cannon in its torso, a variable-output beam shot rifle (a pump-action activates a shotgun-like burst, otherwise functions as a normal beam rifle with semiautomatic fire), and a battery of melee weapons. Its large shield includes space to store a beam tomahawk, as well as three missiles. It is also armed with half a dozen of the same funnel remote weapons as the Jagd Doga. However, the Sazabi's most notable tool is its Psychoframe, a device created by the Neo Zeon movement to both amplify and better harness a Newtype pilot's combat capability. In addition to functioning as a standard psycommu system for control of the funnels, it also boosts a Newtype pilot's ability to control the mobile suit it is mounted in: this translates to a greatly improved reaction time in combat situations, cutting down or eliminating entirely the delay associated with manual controls. Furthermore, the Psychoframe is also capable of more "unforeseen capabilities" that even its pilots do not fully comprehend. Gundam Unicorn confirms that Sazabi's psychoframe contains Char's memories, allowing Neo Zeon to use the data and implant Char's memories into Full Frontal's mind. Unusually enough for a mobile suit, the cockpit is located inside the head of the unit as opposed to within the torso.

After protagonist Amuro Ray is equipped with his own custom-designed Nu Gundam, provided with a psychoframe of its own (at Char's behest, no less), Amuro and Char engage in combat above the asteroid Axis, where Char is eventually defeated in hand-to-hand combat (each combatant having disarmed the other of their mobile suits' weaponry). Fortuitously for Char, the Sazabi was also designed with an escape pod which is automatically fired if the mobile suit sustains critical damage, although this does not save him as Amuro manages to catch the escape pod.

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

• minovsky craft unit deployment
  Open and close the shoulder and chest armor!
  Flight form can be reproduced by minovsky craft unit deployment gimmick!

• major armed base addition is also included!
  Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

• Messer, garsezon included!
  Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

• eyes switched gimmicks
  By switching the eyes part sides, can be selected without eyes!

• funnelmisail
  Funnelmisail injection effect parts! Can reproduce the firing scenes!

[Daban] 1/100 Gundam Astray Red Frame (MG)

Series : Gundam Age

Brand: Mo Wan Ke
Scale: 1/48

Please note that this is NON-Bandai product

[393] SDBB Legend BB Full Armor Knight Gundam

Amazing kit of the La-Vie-en Rose (French for "Life through rose-colored glasses") spaceship as seen in the Gundam ZZ and Gundam 0083: Stardust Memory OVA comes with snap fit assembly parts (some parts require cement) that are easy to assemble and a base and stands are included for holding the rose-shaped spaceship and both Albion (not included in this set) and Gundam Dendrobium Orchis (included) for display. 

• Italian dandy Miles at MG!
• Previous work was dramatic appeared in the last episode of [Gundam Build Fighters], appeared aircraft hugely popular with Ricardo Fellini is a fighter in the MG. Deformation and Buster rifle custom of separating coalescence gimmick to flight form, to reproduce the beam cloak at MG format each, which is a typical equipment of La Fenice.
• Beam cloak can be a variety of poses is composed of three parts.
• Wing movable. Beam cloak is also included.
• Deformation to landing legs arms is deformed is a variant of the flight form. Further, the Buster rifle custom and can be mounted by the joint parts.
• New design of the pedestal is included.
• Accessories: Rinascita Rifle (Buster rifle, Hand Rifle, Beam Sword), Rinascita Wing Shield, Beam Saber, Beam Mantle x2, Multi-Joint Parts x2

• Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`
  
  
• Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!
  
  
• REVIVE1: characteristic proportions
  By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.
  
  
• REVIVE2: can be bold poses
  You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.
  
  
• REVIVE3: the ease of set and pursue
  Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.
  
  
• REVIVE4: also included parts enhance
  Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.

• The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
• In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
• The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
• The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
• The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
• The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
• The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
• Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
• Riddhe Marcenas figures (standing and seated) are included. 
• Includes original marking stickers. 
• Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

Gundam HG Build Custom HGBC #023 Giant Gatling Build Fighters Support Weapon 1/144 Model Kit

Different gatling gun types can be made through the use of various attachments and also includes grips that allow use by 1/100 models!
Runner x2, Instruction Manual
Approx. 4.75" long

HG 1/144 Wing Gundam Zero Custom

HG 1/144 Perfect Strike Gundam

• Orufenzu 1/100 series line up 3rd Blood and iron!
  
• Custom machine was high mobility of and renovate the glaze of the prototype, Shuvu~arube Grays (McGillis machine) appeared in 1/100 series!
• 1/100 and easy to set a scale specification!
• - The number of parts is small, to set easy to specifications runner arrangement that has been organized by the site. Reproduction of setting color combination of the parts division and a foil seal is also pursuing.
• - Similarly set to reproduce the internal frame shape. It can be the frame state when removing the exterior.
• Various armed also included!
• - Rifles and Battle Axe is included. Battle Axe is mountable to the waist.
• - The claw injection gimmick can reproduce!
• Conjunction with 1/100 Gundam Barbatos!
• - Claw unit of this product is 1/100 Gundam Barbados, 1/100 Grays (general machine / commander machine) and can be customized for Gundam Barbados in combination!

• SD Ex-Standard XXXG-00W0 Wing Gundam Zero EW
  
• SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.
  
• The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.