GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

Sharing the same mold as the 2007 1/100-scale Gundam Exia, this kit of Setsuna's Mobile Suit comes molded in glossy colors for you to build the mech in Trans-Am mode. The sharply detailed kit can take on a wide range of poses upon completion, thanks to the use of polycaps in its joints. It comes fully equipped with its signature weaponry, including a GN sword that can switch to GN sword rifle mode, and foldable shoulder antennas. Not a drop of glue or paint is required! A sheet of hologram foil stickers is included. Combat Characteristics Designated as a 3rd-generation Gundam, the Gundam Exia is built with close combat as its major strength. The unit is the successor to its second generation predecessor, GNY-001 Gundam Astraea; much of Exia's design was heavily influenced from Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems. Exia was created as a high-mobility unit to greatly supplement its close combat role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control (AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1] The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration. Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1] When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater mobility is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack. The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet. In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat. Source:wikipedia

This heavy Gundam from Gundam 00 features a large beam bazooka that be switched between single handle mode and GN Burst mode that can hook up to the massive GN Condenser in its chest. Barrel can extend revealing the powerful energy conversion device detail inside.

GaoGao Daban Gao Gao NG 1/100 GN-003 Kyrios Gunpla

Daban 8822 1/100 OOQ 00 Qan[T] Gundam Quanta MB Ver.Brand: DabanCountry of production: China
Package Content

• ABS Plastic model pla plate
• Action Base included
• Water Decal included
• LED light and battery included
• Not included manual book. (Need to download manual )

Special Coating : MG 1/100 Dynames Gundam

• P-Bandai: HG 1/144 Gundam Plutone
• From the Mobile Suit Gundam 00P, appears one of the 2nd generation Gundam! Plutone arrives in the High Grade model kit series, offering variety of color separation and completely new molded parts.
  

The Master Grade 00 Gundam series has finally added the Gundam Exia's 3rd repair variant that first appeared from the Mobile Suit Gundam 00V: Battlefield Record graphic novel series. 

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)

• Brand : Daban
• Scale : 1/100
• TV Anima Version
• Manual booklet
• Sticker
• Excluded stand
  

-GUNDAM UNIVERSE Gundam Exia started. Drive out the target.

-Gundam Exia appears from the first [Mobile Suit Gundam 00]. Equipped with GN Sword, GN Long Blade, and GN Short Blade to reproduce a voluminous decoration.

-Comes with a large volume GN sword.
-The GN sword can be stored. GN Blade can be mounted on the mount racks on both legs.
-The GN Blade comes with two types of blades, short and long.
-The pose in the play is decided by the stylish modeling arrangement.

[set content]
? Main body
? Replacement wrist left and right
? GN Sword
? GN Long Blade
? GN Short Blade
? Soul stage joint

• [Figure Size]: Approximately 15cm
  
• [Materials]: ABS, PVC

[Set Contents]:

• Main figure
• Interchangeable hands (x1 each, left and right)
• GN Sword II (x2)
• Joint for Tamashii Stage

[Daban] 1/100 Gundam Avalanche Exia

The GunPla Mater Grade series adds the Gundam Astraea Type F that first appeared in the Mobile Suit Gundam 00F and Mobile Suit Gundam 00I manga side story series. This kit is completed with its full weapon system featuring a Proto GN Sword, Proto GN Launcher, GN Hammer, GN Beam Rifle, GN Shield, and NGN Bazooka!

GaoGao Daban Gao Gao NG 1/100 GN-001 Exia Gunpla

Daban 1/100 MG 6657 GN-005 Gundam Virtue Model Kit