• X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
• Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  
• Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  
• Canopy and those of the all-clear material, two is supplied only frame.
  
• to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  
• Distinctive wings reproduce the opening and closing of the same in the play.
  
• Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  
• Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  
• Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  
• The same scale of the pilot (seated type upright type) and BB-8 is included.
• [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  
• [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1
  

Bandai's "Star Wars" lineup expands with the 1/12-scale Storm Trooper model kit! This standard-issue bucket head will come with multiple interchangeable hands, several weapons and a removable holster, as well as a display base. Fully posable after assembly, he'll be ready to whack his head into overhead doors, get beaten up by Ewoks, or escort Death Star prisoners to their doom as you choose! 

• This product is only sold in Japan currently.
• Not many units available ~ hurry while stock lasts.
  
• 3xAA battery required and sold separately.
• [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION
  

The Millennium Falcon was a Corellian YT-1300 light freighter used by the smugglers Han Solo and Chewbacca during the Galactic Civil War. It was previously owned by Lando Calrissian, who lost it to Solo in a game of sabacc.

Its aged appearance belied numerous advanced modifications to boost the ship's speed, weapons and shield, including a hyperdrive engine among the fastest in the entire galaxy, enabling it to outrunImperial Star Destroyers. It also included sensor-proof smuggling compartments, which were used during the rescue of Princess Leia Organa to evade Imperial stormtroopers. Afterwards, the Millennium Falcon saw further action when Solo chose to join the Rebels during the Battle of Yavin, where it was able to sneak up on Darth Vader'sTIE Advanced.

After Han was captured on Bespin, Lando took command of theFalcon once more to search for him, and later flew the ship at theBattle of Endor, where it entered the Death Star II and destroyed it from within. During this battle, the starship's circular sensor dish was knocked off as Calrissian piloted it through the Death Star's interior.

In addition to its renowned hyperdrive, which made the Falconboasted as the "fastest ship in the galaxy," the ship was equipped with a backup hyperdrive. Compared to the primary engine, it was much slower and often took several weeks or months to reach the nearest star system. It also had a dejarik table featuring creatures found throughout the galaxy.

At some point over the following thirty years, the sensor dish was replaced with a rectangular model.

Bandai are continuing their 1/12th figure range with the new First Order storm trooper. The snap together kit can be built up unpainted but we think the traditional glue and paint method will make this into a cool looking model - Don't know too much about the First order?

X Wing Fighter (Resistance Specification) Appears in the Vehicle Model Series with "Star Wars / The Last Jedi" Version! While palm-sized collection model, the new droid loaded in the X wing fighter and the characteristic airframe are precisely reproduced! Total length: about 87 mm [INCLUDED ACCESSORIES] ■ Dedicated display base × 1 [CONTENTS] ■ Sprue x 5 ■ Marking seal × 1 ■ Instruction Manual × 1 (printed on the back of the box)

Display alongside the included in-scale Millennium Falcon and Blockade Runner ships to recreate the scenes from the film.

• 1/5000 Scale
• 12.6 inches (32cm) long when assembled
• Made of plastic
• From Star Wars: Episode IV A New Hope
• Includes display stand and in-scale Millennium Falcon and Blockade Runner
• Instructions may or may not include English translation

Display alongside the included in-scale Millennium Falcon and Blockade Runner ships to recreate the scenes from the film.

• 1/5000 Scale
• 12.6 inches (32cm) long when assembled
• Made of plastic
• From Star Wars: Episode IV A New Hope
• Includes display stand and in-scale Millennium Falcon and Blockade Runner
• Instructions may or may not include English translation

Astromek droid "R2-Q2" appearing in "Star Wars Episode 4 / New Hope" appears in the droid series!
-   We reproduce characteristic body color, detail with parts division and each part marking seal faithfully.
-   Dedicated display base is attached.

[INCLUDED ACCESSORIES]
-   Dedicated display base x 1

[CONTENTS]
-   Molded parts x 5
-   Kinousseal x 1
-   Instruction manual x 1

The 1/12 Scale Shadow Stormtrooper comes molded in a glossy black color. He comes armed with three weapon types and can be posed in a variety of positions.

The newest vehicle model from Star Wars is the Super Star Destroyer! This model faithfully recreates the massive ship from the original Star Wars trilogy.

This model kit two-pack contains a Star Destroyer and an Executor Class Super Star Destroyer with clear display stands.

This 1/12 scale model kit features a First Order Stormtrooper as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit are three types of shoulder paldron parts as well as six interchangeable hand parts.

Based on the movie Star Wars: The Rise of Skywalker comes this 1:12 scale model kit of Kylo Ren. The Star Wars: The Rise of Skywalker Kylo Ren 1:12 Scale Model Kit includes Lightsaber parts with in-motion swing effects as well as hooded and un-hooded cloak parts. This model kit is a must have for Star Wars fans!

This 1/12 scale model kit features BB-8 and D-O as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit is a diorama display base.

This two-pack includes parts to build a regular X-Wing Fighter and Poe\'s personal X-Wing Fighter, both of which were featured in The Rise of Skywalker!

This 1/144 scale vehicle kit set includes two clear display stands, upgraded molds for the R2-D2 and R6-D8 Units, and name plate stickers for each Fighter.

Product Features

• 3.43 Inches when completed (8.7cm)
• 1/144 Scale
• Made of plastic
• Based on Poe\'s X-Wing Fighter and a regular X-Wing Fighter in Rise of Skywalker
• Vehicle model kit set
• Includes 2 clear display stands, name plate stickers, and upgraded R2-D2 and R6-D8 parts
• Instructions may or may not include English translation

Recreate the final battle of the hit film Star Wars: The Rise of Skywalker using this mini-X-Wing Fighter model kit! This 1/144 scale vehicle model kit includes pieces to build a display stand along with an upgraded molded R6-D8 unit.

Collect multiple to create your own squadron!

Product Features

• 3.43 Inches when completed (8.7cm)
• 1/144 Scale
• Made of plastic
• Based on the X-Wing Fighter\'s appearance in The Rise of Skywalker
• Vehicle model kit
• Includes display stand and upgraded R6-D8 parts
• Instructions may or may not include English translation

First order Stormtrooper

- The characters of the first order are now in the lineup to the famous general MOVIE REALIZATION series.
- A soldier who serves [Sakai Cairo Ren] (sold separately) scheduled for release in October 2019 is dispatched.

- set content
  * Main body
- Replacement wrist left and right two each
  * Japanese sword set
Blaster rifle

• From the first live-action drama series Mandalorian of Star Wars, the transport armor shuttle Razor Crest owned by the main character Mandalorian has appeared!
  
• Normal color version for painters.
  
• A pedestal with a ball joint that can be displayed at the desired angle is included.
  

• From the first live-action drama series Mandalorian of Star Wars, the transport armor shuttle Razor Crest owned by the main character Mandalorian has appeared!
  
• Reproduce the heavy texture of the aircraft with silver coating.
  
• A pedestal with a ball joint that can be displayed at the desired angle is included.
  

• From the first live-action drama series Mandalorian of Star Wars, the main character Mandalorian is made into a plastic model on a 1/12 scale with various accessories!
  
• Normal color that is easy to process such as painting.
  

• From the first live-action drama series Mandalorian of Star Wars, the main character Mandalorian is made into a plastic model on a 1/12 scale with various accessories!
  
• Beskar armor with a characteristic silver color is reproduced with a solid silver coating.
  

New from Bandai Hobby comes the newest addition to the Star Wars model kit series. This model kit is snap together no glue or painting required. These model kits come with iconic accessories and are great to pose or display in your collection.

• Boba Fett from "The Mandalorian", the first live-action drama series from "Star Wars"!
• Impressive suit details and colors have been updated by reproducing the settings with new modeling parts and adopting molding colors that match the image in the play.
• We adopt cloth material for muffler and waist cloth part and pursue realistic texture.
• Unpainted head parts that can reproduce the state of the real face are included.
• In addition to the weapons that appear in the play such as blaster rifle and blaster pistol, hand parts and a special pedestal are included.
• [Accessories]
  • Blaster rifle x 1
  • Blaster pistol x 1
  • Muffler, waist cloth x 1
  • Unpainted head parts x 1
  • Hand parts x 1
  • Joint parts x 1
  • Dedicated display base x 1
  • Seal × 1