This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

• Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 
  

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

• [059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom
  
• The MS-09R Rick Dom is a mass production space combat mobile suit and a variant of the MS-09B Dom
  

MG 1/100 MSM-07 Z'Gok 

• Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`
  
  
• Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!
  
  
• REVIVE1: characteristic proportions
  By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.
  
  
• REVIVE2: can be bold poses
  You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.
  
  
• REVIVE3: the ease of set and pursue
  Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.
  
  
• REVIVE4: also included parts enhance
  Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.

• REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  
• FUN TO BUILD
  
• `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  
• BEST PROPOTION
  
• REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  
• OPTION
  
• The main armament of Gouf also abundantly included!
  
• Heat rod can be bent freely, a variety of poses is to be able to!
  
• Heat saber can be stored in the shield.
  
• Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack
  

• Accessories: dedicated beam saber, dedicated shield
  

[Daban] 1/100 Jesta (MG) Clear Version

- From [Mobile Suit Gundam UC Episode 4 gravity well's bottom], Kit Kanon Detector, which made a fierce battle with Zion army remnants at Torrington Base, became the first kit!

- High detailing various parts such as armor and backpack base, according to the scale feeling of RE / 100.
- In addition, the 'assembly ease' which is the feature of the RE / 100 series is also alive.
- The gimmick pose in the play can be precisely reproduced by the movable gimmick of the leg and the waist.
- Three-dimensional gun canon / detector dedicated beam rifle with precise detail, grenade reproduced with trigger.
- The 170mm Cannon gun used by Nemo deployed at Torrington Base is also included, and it can also be equipped with the MG Unicorn series of the same scale.

- accessories
* Special beam . Rifle x 1
* Beam gun x 1
* Beam . Cannon x 2
* 170mm Cannon gun x 1

- Product content
* Molded product x 12
* Seal x 1
* Marking stick x 1
* Instruction manual x 1

-Gunpla 40th Anniversary! From [Mobile Suit Gundam], Char\'s Zaku II appears in the HG series with new modeling!

-Revive proportions in [Mobile Suit Gundam] with the latest technology.
-The mono-eye can be moved by moving the operation rib on the back of the head.
-The arm also rotates the forearm in addition to the upper arm, ensuring a large range of motion.
-Includes soft material parts that further extend the range of motion of the waist. It is a selection type of plastic parts and soft material parts.
-Three weapons can be attached to the waist.

[accessories]
* Soft material skirt parts x 1 set
* PS molded skirt parts x 1 set
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Foil seal x 1

• To celebrate GunPla 40th anniversary, Bandai Spirits has announced the release of the new version of Entry Grade 1/144 RX-78-2 Gundam. 
• The kit welcomes new variety of gimmicks and style in building GunPla!
  
• Compare to other First Grades and any other basic grade models, this kit offers extended articulation and great amount of detailing provided with amazing color separation. 
• The kit also eliminates the use of sprue cutters, and even the use of stickers.
  
• The kit contains 74 pieces that is also provided with easy-build system. Bandai Spirits has molded the parts in the runners in more convenient way !

1/250 Scale Three Mobile Suits Diorama Set (Ramba Ral Suicide Attack)

- Hello Kitty and Gundam, the second dream collaboration project
- A set of Zaku II and Hello Kitty comes up from the SDCS series

- Easy assembly without adhesive.
- The combined form of Zaku II and Hello Kitty can be reproduced.
- Abundant items for Zaku are included.
- It is possible to have the small apple parts included in the hand of Kitty.
- Kitty can also sit and pose.
- With apple parts and apple-shaped pedestal.

[accessories]
- Set of equipment
- Apple x 1
- Apple pedestal x 1
- Foil seal x 1
- Tetron seal x 1

HG 1/144 RX-78-2 Gundam Clear Color Ver.  

Gao Gao Daban Entry Grade Strike Gunpla Fighter with Back Pack Model Kit for Boys