• Home
  • Showing METAL PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing METAL PARTS product(s)

Showing 31 - 60 of 161 products

Quick View
img
SAVERM11.50

[Metal Part] Gatling Gun Muzzle (4 muzzles in 1 pack) for MG

  • Metal Part: Modelling kits metal parts - Gatling gun muzzle (4 muzzles in 1 pack)
  • Installation diameter: 2.0mm
  • For 1/100 MG Size

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C6, Red) (2 Units)

[Metal Part] Blue Metal Thruster Vents (C7)

  • Specifications: Maximum diameter 15mm, Height 12mm, Joint Diameter 2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

    1)Requires drilling works to create a joining point (2mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM15.30

[Metal Part] MG 1/100 Hi-Nu Gundam Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM88.40
RM88.40 Add to cart
Quick View
img
SAVERM30.20

[Metal Part] RE 1/100 Gundam Mk III Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
RM73.50 Add to cart
Quick View
img
SAVERM45.20

[Metal Part] RE100 Gundam GP04G Gerbera Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Shoulder thruster x2drill 1.5mm hole, attached to point with minor cement
2.Lower shoulder thruster x8drill 3.0mm hole, attached to point with minor cement
3.Aviation hole on shoulder x3drill 3.0mm hole, attached to point with minor cement
4.Backpack thruster x15drill 2.5mm hole, attached to point with minor cement
5.Aviation hole on armor x15drill 2.0mm hole, attached to point with minor cement
6.Single line screw x30drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM58.50
RM58.50 Add to cart
Quick View
img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Gold Colour

  • Diameter: 4.0mm
  • Gold colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Add to cart
Quick View
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Gold Colour

  • Modelling Kits Gatling Gun Bullet Chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
RM8.50 Add to cart
Quick View
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Silver Colour

  • Modelling Kits Gatling Gun Bullet Chain - silver colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
RM8.50 Add to cart
Quick View
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Black Colour

  • Modelling Kits Gatling Gun Bullet Chain - black colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
RM8.50 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 2mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM5.85

[Metal Part] Aviation Hole 1.6mm for HG / MG Gundam model kits - 15 units

  • 1.6 mm outer diameter aviation hole.
  • Package include 15 units of 1.6 mm aviation hole for modelling kits customization.
  • For other custom size please email us.

RM7.15
RM7.15 Add to cart
Quick View
img
SAVERM6.55

[Metal Part] 2.5mm Flat Head Screw * 30 units

  • Package include 30 units of flat head screws for modelling kits
  • Diameter of flat heat screw is 2.5mm.
  • Thickness : 1.5 mm

RM8.45
RM8.45 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
RM9.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S7, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM10.00

[Effect Wing] EW Metal Build Alloy Inner Frame for MG Wing Zero Ver. Ka

* Brand : Effect Wing
* Metal Build Alloy Inner Frame for MG Wing Zero Ver. Ka
* The original MG Wing Zero Ver. Ka Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
* Through the package modification, the effect of the finished diecast MG Wing Zero Ver. Ka Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
* Anyhow, this modification does not completely solve all the problems of the original.

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM10.00

[IRON TOYS] Metal Build Alloy Inner Frame and Metal Parts for Full Mechanics FM 1/100 Gundam Aerial

Brand : Iron Toys (Tie Chuang)
  • Metal Build Alloy Inner Frame for Full Mechanics FM 1/100 Gundam Aerial
  • The connector between the calf and knee is changed from separate parts to one part.
  • The power tube at the rear of the leg is changed to a braided rope style display.
  • The original Full Mechanics FM 1/100 Gundam Aerial design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast Full Mechanics FM 1/100 Gundam Aerial model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM128.00
RM128.00 Add to cart
Quick View
img
PO PriceRM128.00

[TLX] Metal Build TLX MGEX Strike Freedom Alloy Inner Frame Gold Color

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : JUL 2025

- P-O Price RM128.00
- Deposit RM30.00, Balance RM98.00
- We will inform to make balance RM98.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
* Metal Build Alloy Inner Frame for MGEX Strike Freedom Gundam
* The original MGEX Strike Freedom Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
* Through the package modification, the effect of the finished diecast MGEX Strike Freedom Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
* However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
Quick View
img
PO PriceRM105.00

[DIAN CHANG] Metal Build Alloy Inner Frame for MG Astray Red Frame

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : DEC 2022 
Estimate arrival : JAN / FEB 2023 

- Preorder Price RM105.00 
- Deposit RM10, Balance RM95.00 
- We will inform to make balance RM95.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

 ###############################################################
  • Metal Build Alloy Inner Frame for MG Astray Red Frame
  • The original MG Astray Red Frame Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Red Frame Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Request Stock
Quick View
img
SAVERM10.00

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Red Frame

  • Metal Build Alloy Inner Frame for MG Astray Red Frame
  • The original MG Astray Red Frame Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Red Frame Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM118.00
RM118.00 Request Stock
Quick View
img
SAVERM4.80

[Metal Part] 5.0mm Ribbed Shell Screw * 4 units

5.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 5.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
RM5.20 Request Stock
Quick View
img
SAVERM4.80

[Metal Part] 4.0mm Ribbed Shell Screw * 4 units

4.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 4.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
RM5.20 Request Stock
Quick View
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
RM5.20 Request Stock
Quick View
img
SAVERM13.00

[Metal Part] MG 1/100 PMX-003 THE-O Metal Enhancement Part Set

[Metal Part] MG 1/100 PMX-003 THE-O Metal Enhancement Part Set


It contain 12 types of metal parts for MG The-O to enhance

1. Red Metallic Lens for MG The-O x 1
2. Shoulder detail stick  x 1
3. Forearms Energy Pipe x 1
4. Flat Head Screw foor Arms x 4
5. Energy Pipe on Waist  x 1
6. Joining Angle Detailing Enhancement Parts x 1
7. Flat Head Screw for Legs x 8
8.  Energy Pipe on Legs x 1
9.  Energy Pipe on Front Legs x 1
10.  Energy Pipe on Rear Legs x 1
11. Flat Head Screw 2.0 mm for Body x 30 
12. Aviation Hole 2.0mm for Body x 20 

RM85.00
RM85.00 Request Stock
Quick View
img
SAVERM74.70

[DIAN CHANG] Metal Build Alloy Inner Frame for MG 1/100 Phenex (Gold)

  • Metal Build Alloy Inner Frame for MG 1/100 Phenex Gundam
  • The original Unicorn Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Unicorn Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM135.00
RM135.00 Request Stock

Showing 31 - 60 of 161 products