• Home
  • Showing MOBILE SUIT GUNDAM product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing MOBILE SUIT GUNDAM product(s)

Showing 271 - 300 of 365 products

Quick View
img
SAVERM31.90

[121] HG 1/144 Extreme Gundam

  • EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
  • Discovery of a new action by the militants pose a motif instrument.
  • The four parts are included wrist, expand the range of expression.
  • The guitar can be stored in the shield-type rifle.
  • Reproduced in blue light-emitting clear parts.
  • Accessories: beam rifle, beam saber, shield

RM64.00
RM64.00 Request Stock
Quick View
img
SAVERM111.78

MG 1/100 G Fighter (Operation V Model For Gundam Ver.2.0)

  • "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  • The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  • Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  • The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  • Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff

RM224.00
RM224.00 Request Stock
Quick View
img
SAVERM54.90

MG 1/100 RX-78-2 Gundam Ver.1.5

  • MG RX-78-2 Gundam (Ver.1.5)
  • This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  • Upgrade product of the master's first grade! !

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM13.90

[329] SDBB RX-78-2 Gundam (Animation Color)

  • It appears from the BB soldier of the 30th Gundam anniversary in a Gundam new specification. 
  • The prime field uses the one of BB soldier No.236 perfect Gundam. 
  • It is a popular style in the RX-78-2 Gundam of the BB soldier series. 
  • Movable range of head to decide line of vision easily. Even with arms with the collaboration parts of the chest and the shoulder, the pose is decided. Flight pose road-hugging ..&.. high. range of movement & movable tiptoe it where hip joint is wide - It is the marking Tetoron seal attached though it is small that produces the outlook on the field of real of ..becoming it.. [sei]. 
  • Arms are a new metal molds and newly built types. Special arms to consider the outlook on the world of a real BB soldier are reproduced by a new metal mold. - Accessories: 1 and 1 and shield × beam saber × 1 beam rifle.

RM34.00
RM34.00 Request Stock
Quick View
img
SAVERM7.80

[063] SDBB Crossbone Gundam X2

BB Cross Bone Gundam X2

RM16.10
RM16.10 Request Stock
Quick View
img
SAVERM7.80

[061] SDBB Gundam Blue Destiny

BB Gundam Blue Destiny

RM16.10
RM16.10 Request Stock
Quick View
img
SAVERM4.90

[054] SDBB MS-07B Gouf

RM18.00
RM18.00 Request Stock
Quick View
img
SAVERM29.90

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM69.90

MG 1/100 MS-06F Zaku II Ver.2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM27.90

[071] HGUC 1/144 Zaku I Sniper Type

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 


This impressive kit is easy to assemble and looks great even without paint! Its right knee can be folded down when taking a sniper position, a nylon mesh cover and bendable wire are included for detailing and connecting the backpack to the sniper rifle, and there are clear plastic parts for the mono eye and scope lens. 

A Zaku machine gun is also included as a backup weapon.

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM29.90

[032] HGUC 1/144 MS-06S Char's Zaku II

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 


The kit is fully posable, molded in color, snap assembly required, etc.

Accessories:
  • Heat Hawk Axe
  • Zaku Machine Gun
  • Bazooka

RM42.00
RM42.00 Request Stock
Quick View
img
SAVERM525.70

PG 1/60 RX-78-2 Gundam (30th Anniversary Limited Model Extra Finish)

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM794.20
RM794.20 Request Stock
Quick View
img
SAVERM65.90

MG 1/100 RX-78-2 Gundam Ver.O.Y.W 0079 Animetion Color

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.


Wikipedia Information
The RX-78-2 Gundam(aka Gundam) is the titular mobile suit of Mobile Suit Gundam. Part of the RX-78 Gundam series, It was built in secret on Side 7, the Gundam would turn the tide of war in favor of the Earth Federation during the One Year War. The unit was primarily piloted by Amuro Ray.

The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium, its frame was both lighter than that of Zeon's mass-produced Mobile Suits and much sturdier, able to shrug off a Zaku's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zeon Zakus. The Gundam would engage in most battles with its Beam Rifle making it the first Mobile Suit to have firepower equivalent to a battleship beam cannon. In addition, it made use of two beam sabers, a blade of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance than the blade of the saber would allow.

The Gundam also used more conventional weaponry: it could be launched with a Hyper Bazooka, the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan cannons, providing it with a last resort weapon as well as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the Gundam Hammer - a large weapon similar to a flail which could be swung at enemies to deal crushing damage.

The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the Hyper Hammer. Lastly, it wielded a large shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot Amuro Ray would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.

In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Boa Qu to improve its reaction times, the joints of the Gundam were given a Magnetic Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".

The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the Gundam be too heavily damaged and gives the pilot a chance to escape from battle.

Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull

Weapons
  • 60mm Gatling Cannons "Vulcan Gun"- The Vulcan cannons were 60mm Gatling Guns stored on the sides of the Gundam's head. Having the greatest rate of fire of all the Gundam's weapons these are primarily used to ward off advancing enemies, shoot down missiles, or hit other fast moving targets. They also made good use as an anti-aircraft and anti-personnel weapons. The Vulcan cannons however had a hard time piercing heavy armor (Though they had shown the ability to do severe damage to Mobile Suit's if fired at point-blank range)and thus were not often used against larger, more heavily armored foes. Still the Vulcans were useful in preserving ammunition for the Gundam's more powerful weapons such as the Beam Rifle.
  • BAUVA*XBR-M-79-07G (Bauva eXperimental Beam Rifle Medium-range) - A revolutionary weapon for it's time, the Beam Rifle is the primary weapon used by the Gundam. Making use of the Federations E-cap (or "energy capacitor") technology, the rifle uses charged concentrations of Minovsky particles as ammunition. This gives the beam rifle firepower equivalent to that of a battleship's beam cannons. As the Minovsky particles destroy matter on a molecular scale, the beam rifle can penetrate even the thickest armor and destroy its target with a single shot. One weak point of the rifle was its energy limits. The rifle could only be fired 16 times before depleting its energy and becoming useless.
  • Beam Saber- The Gundam was the first mobile suit to ever use a beam-oriented weapon in melee combat. The sabers are stored on the backpack, and can transform from saber to the Gundam Javelin, a large pole with a three pronged beam at the end. The beam sabers use Minovsky particles held in place by an I-Field to form an effective cutting surface that can slice through nearly any material. The particles for the beam sabers are stored by E-cap in the hilt of the saber, which is recharged from the Gundam's reactor when the saber is returned to its socket. Once activated, beam sabers do not rely on the mobile suit's reactor and can be thrown or discarded as decoys. The beam saber is most often used for close range combat or as an emergency weapon once all other ammunition has been depleted.
  • Gundam Hammer/Hyper Hammer - A rather unusual weapon, the Gundam Hammer was essentially a large spiked ball attached to a chain. It was used to give the Gundam a ranged melee weapon. The Gundam could either throw or swing the Hammer around itself in order to impact and damage its target through the sheer mass of the hammer. Later, it was upgraded into the Hyper Hammer and had several rockets mounted into the ball in order to give it use in space allowing it to maneuver in zero-gravity also the ability to change it's direction before impact, and to increase the damage it could cause.
  • BLASH*XHB-L-03/N-STD (Blash eXperimental Hyper Bazooka Long-range) - Similar to the Zaku's Bazooka, the Hyper Bazooka was a heavy weapon used by the Gundam. Technically a large rocket launcher it could fire several 380mm missiles to attack targets at long range. While very powerful the Hyper Bazooka had a slow rate of fire and fairly little of ammunition. Most oftenly used to take out slow, heavily armored targets.
  • RX*M-Sh-008/S-01025 (Renpou [Federation] eXperimental Medium Shield) - Hand-carried, forearm-mounted or stored on the Gundam's backpack, the shield is a simple defense used to block most incoming ballistic and explosive projectiles. Also used to great effect in close quarters battle with enemy mobile suits. Has a view port than can be sealed off with an internal blast plate. The shield is also used to deflect heat away from the mobile suit when undergoing atmospheric re-entry.
  • Core Block System - The initial idea of the Core Fighter was as a form of escape if the Gundam were to be destroyed, allowing the irreplaceable data collected by the learning computer and the pilot to escape from a replaceable machine. Another idea was that the Core Fighter could be launched into the field as a support fighter, and the A and B blocks could be delivered by another vehicle (the Federation developed a support unit, the Gunperry, for this role) if needed for a mid-air conversion into a mobile suit.
  • Learning Computer System - A critical component of the Gundam's success in combat, the Learning Computer System was similar to a modern day black box. It recorded the data from each of the Gundam's battles for further use. However, the system could also actively learn and improve the capabilities of the Gundam, explaining why Amuro had such difficulty fighting two Zaku IIs on his first try but managed to hold off ace pilot Char Aznable at Luna II.
  • Re-entry Coolant System - The re-entry system is used for only emergencies when the Gundam is falling to Earth and has no chance of reaching its carrier. The coolant system acts as a large heat-resistant film which lowers the Gundam's temperature when descending to Earth.

RM126.00
RM126.00 Request Stock
Quick View
img
SAVERM69.86

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM24.00

Daban 6628 MG 1/100 RX-78-2 Gundam Ver.3.0.

Daban MG 1/100 RX-78-2 Gundam Ver.3.0.

Brand : Daban
Code : 6628
Model : RX-78-2
Scale : 1/100
Grade : Master Grade

Please note that this is not Bandai product

RM78.00
RM78.00 Request Stock
Quick View
img
SAVERM75.00

P-Bandai: HGUC 1/144 Gundam Pixie

P-Bandai: HGUC 1/144 Gundam Pixie

Release Date: June 2018

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM13.90

[04] SD GUNDAM CROSS SILHOUETTE ZAKU

SD GUNDAM CROSS SILHOUETTE ZAKU ?


The Zaku II strikes! A mass-produced MS with an abundance of weapons is joining the SD Cross Silhouette series! Utilizing a gray frame, the Zaku II can also combine the with BAN230354 CS Frame (sold separately) to allow for taller proportions! Clear parts are used on the mobile suit's mono eye and includes an articulation gimmick which uses a rail. The iconic Zaku Machine Gun, Zaku Bazooka, missile pod, and Heat Hawk are all included!

Accessories:
  • Zaku Machine Gun x1
  • Zaku Bazooka x1
  • Missile pod x2
  • Heat hawk x1

Set Content:
  • Runner x3
  • Foil sticker sheet x1
  • Instruction manual x1

RM34.00
RM34.00 Request Stock
Quick View
img
SAVERM11.90

[OP02] SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [GRAY]

SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [GRAY]

Combine with other SD Gundam Cross Silhouette line items to recreate the tall proportions for each MS! Like, the White version, this also includes different attachment points and is compatible across the SDCS line. This frame includes a GM head.

Content:
- Runner x1
- Instruction manual x1.

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM40.00

P-Bandai: HGUC 1/144 MS-08TX (Exam) Efreet Custom

P-Bandai: HGUC 1/144 MS-08TX Efreet

Release Date: July, 2018
Estimate Delivery Date: August, 2018

RM150.00
RM150.00 Request Stock
Quick View
img
SAVERM20.00

P-Bandai: MG 1/100 Jegan Type D

P-Bandai MG 1/100 Jegan Type D

Release Date : April 2019
Estimate Delivery : May 2019

[ACCESSORIES]

  • Beam Rifle
  • Beam Saber
  • Shield
  • Hand Grenade

RM260.00
RM260.00 Request Stock
Quick View
img
SAVERM306.70

MG 1/100 Ex-S Gundam / S Gundam

Previously released back in 2003, Bandai's upgraded Master Grade kit of the Ex-S Gundam/S Gundam from "Gundam Sentinel" features some parts inspired by the MG Deep Striker! You can assembly it as the Ex-S or the S, and you can display it in its separated forms (G Core, G Attacker and G Bomber) too. The head, shoulders, chest and backpack are all inspired by the Deep Striker, and the shape-changing parts of the abdomen are also reshaped. This kit is molded in color so painting isn't necessary. 


Accessories:

- Beam smart gun
- Beam saber/beam cannon (x2)
- Incom 3x3
- Foil sticker sheet
- Marking sticker sheet
- Lead wire (x3)
- Screw (x27)

RM460.00
RM460.00 Request Stock
Quick View
img
SAVERM15.90

[14] SD Gundam Cross Silhouette MS-06S ZAKU II

-[Char's Zaku II] is now available in the SDCS series, where you can enjoy the combination!

-Coloring is reproduced with molding color.
-Mono eye is movable!
-Includes a short life frame (gray).
-Comes with abundant armament that colors posing.

[accessories]
  • Zaku Machine Gun x 1
  • Zaku Bazooka x 1
  • Heat Hawk x 1
  • Foil seal x 1

RM32.00
RM32.00 Request Stock
Quick View
img
SAVERM13.10

[OP-06] SD Gundam Cross Silhouette Cross Silhouette Frame [Green]

-Green color appears in the cross silhouette frame with excellent mobility!
-You can make SD cross silhouette taller!

[accessories]
Cross silhouette frame [Green] x 1

RM22.80
RM22.80 Request Stock
Quick View
img
SAVERM59.70

HG 1/144 Gundam G40 (Industrial Design Ver.)

-Reproduced by world-class industrial designer Kiyoyuki Okuyama x director / film director Hen Matsuo [the origin of memory]
-Special Gundams that color the 2019 Gundam 40th Anniversary and the 2020 Gundam 40th Anniversary!

* Pursuing a structure with reality while sticking to human form and movement. The 18m MS is verified through 3D design through the same design production process as a normal industrial product.

* The movable range and joint structure of the limbs are constructed based on realistic industrial design.

*  The image of the main camera on the head moving in a line, expressed with a foil seal.

*  Legs are designed with emphasis on silhouette as well as movement. Recalls a supple jump.

*  Arm joints are conscious of human skeleton. Assuming close combat, joints are added to the forearm to create a line that makes you feel more human.

*  Abdominal torsion and stretching movements are wider than the human body. Expresses the movement that combines human movement and Gundam design.

*  The outline of the whole body is three-dimensional and gentle. Expresses a characteristic body line that makes you feel the future.

[accessories]

*  Beam saber x 2
*  Beam rifle x 1
* Shield x 1

RM120.00
RM120.00 Request Stock
Quick View
img
SAVERM11.90

[OP-05] SD Gundam Cross Silhouette Cross Silhouette Frame [Red]



-Red color appears in the cross silhouette frame with excellent mobility!
-You can make SD cross silhouette taller!

[accessories]
  • Cross silhouette frame [Red] x 1

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM13.10

[OP-07] SD Gundam Cross Silhouette Silhouette Booster [Red]


-Red is a lineup of SDCS [Expansion parts set] that expands the range of play!
-High and low head can be customized by assembling to existing frame!

[accessories]
  • Hand parts x 1 set
  • Frame custom parts x 1 set
  • Gym parts x 1 set
  • Foil seal x 1

RM22.80
RM22.80 Request Stock
Quick View
img
SAVERM12.40

[012] Haropla Haro Basic Green [Gundam]

- That 'Hello' appeared in the plastic model!

- It is popular not even Gundam fans, [Gundam Build Divers] In the play, halo that appears as an avatar of the initial diver kitizes with Gundam!
- Affordable size, collection items that you can enjoy easily with ease of assembly.
- The ears are opened and closed, and the state where the limbs are put out is reproduced by replacement.
- Inner machinery is also modeling sticking!

- accessories
  • Display base x 1

- Product content
  • Molded product x 3
  • Instruction manual x 1

RM17.50
RM17.50 Request Stock
Quick View
img
SAVERM108.00

SD Ex-Standard Hello Kitty/RX-78-2 Gundam

Collaboration project of Hello Kitty who celebrated 45th and Gundam who celebrated 40th!

- Gundam and Hello Kitty appear as a set of SD EX-STANDARD!
- With apple parts and apple-shaped pedestal.
- Kitty can also sit down.

[accessories]
* Apple x 1
* Base x 1
* Armed x 1

RM92.00
RM92.00 Request Stock
Quick View
img
SAVERM298.00

Gundam Fix Figuration Metal Composite MS-06C Zaku II

Release Date : Apr 2020
Estimate Delivery : May 2020

-Mobile suits that everyone knows, [Mass production type Zaku II] appears in GFFMC

-Commercialized [MS-06C Zaku II C type] from [Mobile Suit Gundam THE ORIGIN] to GUNDAM FIX FIGURATION METAL COMPOSITE.
-Coloring and marking are newly three-dimensionalized by Mr. Hajime Katoki supervising the aircraft that can be said to be the origin of MS alongside [Char Zaku II] released from the brand.

-Proportion reproduction by Hajime Katoki. Characteristic [green] is reproduced with coloring except for a part.
-Produces a sense of weight and texture using die-casting.
-Various poses in the play can be taken with abundant movable parts. Each part has a slide gimmick to achieve both range of motion and design.
-Reproduce the Zaku II C type shape with new molding on the chest parts.
-Head parts can be replaced to reproduce a captain with an antenna or a general machine without an antenna.
-In addition to abundant armament, [Bazooka B for MS] is included with new modeling. The single-shot type B1 and the magazine type B2 can be reproduced. Furthermore, the magazine can be suspended on the right shoulder shield.
-You can select the number of each part of the aircraft with the attached decal seal.

- set content
  • Body
  • 4 types of wrist left and right for replacement
  • Zaku Machine Gun
  • Zaku machine gun magazines
  • Bazooka A for MS
  • Bazooka B for MS
  • Bazooka A-type spare magazine x 2
  • Bazooka B-type spare magazine x 2
  • Bazooka A replacement parts
  • Bazooka Type B replacement parts
  • Bazooka latch parts left and right
  • Heat Hawk (long)
  • Heat Hawk (Short)
  • Replacement antenna parts
  • Dedicated pedestal
  • Decal seal

RM900.00
RM900.00 Request Stock
Quick View
img
SAVERM258.20

Gundam Fix Figuration Metal Composite thq RX78-02 Gundam (40th Anniversary Ver.)

Reissue Date : Apr 2020
Estimate Delivery : May 2020

-[Gundam] with original coloring specification commemorating the 40th anniversary

-Commemorating the 40th anniversary of Mobile Suit Gundam, commercialized [RX-78-02 Gundam] from the high-brand GUNDAM FIX FIGURATION METAL COMPOSITE produced by Hajime Katoki.
-A movable pedestal can be set and displayed in a floating state.
-This is a luxury commemorative product with a new marking and drawing by Hajime Katoki.

-New coloring and marking specifications for products now.
-A set of recombination parts and weapons for various situations.
-A luxurious package with sleeves drawn by Hajime Katoki.

- set content
  • Body
  • 2 types of beam rifles
-  shield
  • Bazooka x 2
  • Core Pod
  • Shoulder cannon
-Replacement wrist left and right 3 types each
  • Beam saber x 2
  • Various body replacement parts
  • Dedicated pedestal

RM850.00
RM850.00 Request Stock

Showing 271 - 300 of 365 products