• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
•  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
•  Equipped with a movable core fighter! 
  
•  Includes Stand to display the Core Fighter.
  
•  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
• Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
• Equipped with a movable core fighter! 
  
• Includes Stand to display the Core Fighter.
  
• Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

• Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  
• Its distinguishing design of armor is finely re-created. 
  
• It can hold dynamic poses with its plentiful movable parts. 
  
• Gold and silver metallic color plating makes gorgeous impression. 
  
• Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  
• Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 
  

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

• Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  
• Linked movement for the caterpillar, allowing flexible movement. 
  
• Caterpillar has the feature of resistance to the surface when rotating. 
  
• Dozato Carrier in front and behind the chassis can be deployed. 
  
• Stands included to show the docking sequence of Core Fighter to Guntank. 
  
• Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  
• LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg
  

• A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka (Katori Version). 
  
• Includes clear "Gundam Stickers" with various in-scale warnings and markings on them. 
  
• Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (includes figures of two standing mechanics and a seated pilot).
  

BB-200 GUNDAM RX-78-2 Simple instruction included in a box. Weight: 500g

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RX-78-2 Gundam Ver.G 30th

MS-14S Gelgoog Char Custom Ver.2.0

MSM-04 Acguy

[020] HGUC 1/144 RGM-79 GM

- Coalescence of deformable Gundam Mk-II.

• [059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom
  
• The MS-09R Rick Dom is a mass production space combat mobile suit and a variant of the MS-09B Dom
  

An experimental mobile suit with high velocity, the Zudah from the MS IGLOO series comes with Zaku machine gun, heat hawk, shield, and giant 135 mm rifle. Comes with 3 different helmet styles to replicate the variantes used in the series.

- Commercialization of HGUC series in the MS that appeared in the bonds of Mobile Suit Gundam Battlefield] arcade game.
- The pursuit of realism add a mold rivets, welding in the armor of the whole body.
- Elbow adopts a double joint, reproducible posing in the play.
- Armed comes shield twin beam and Spear (provisional), the beam saber.
Beam Spear, of saber reproduced in clear.
- I reproduce a movable gimmick of twin beam spear, the expansion and contraction of the blade gimmick part of the shield.

RX-78GP02A Gundam GP02A (Type-MLRS) is a prototype general-purpose tactical mobile suit and is a variant of the RX-78GP02A Gundam "Physalis". It is featured in the original design series Harmony of Gundam variations by Hajime Katoki.

Alternate equipments for the Gundam Physalis allow it to function as a heavy assault mobile suit. The nuclear warhead is removed and replaced by a six-tube Multiple Launch Rocket System, or MLRS, with three tubes mounted on each side of the backpack. The rockets in the MLRS are almost the size of a cruise missile, and thus can pack a much larger punch. In mid range combat, it can easily bombard a large area, sweeping down a majority of the enemies so that the normal troops can come in to clean up the remaining enemies easily.
For more conventional firepower, the GP02A can be loaded with a particle generator in place of the nuclear warhead and use the atomic bazooka as a heavy beam bazooka. The firepower of beam bazooka can rival that of a mega particle cannon on a large scale mobile armor such as MA-05 Bigro and the full charge shot is roughly equivalent to that of the massive MA-08 Big Zam.

However, none of the aforementioned equipment is used as the GP02A is stolen by Zeon ace Anavel Gato and then used to disable or destroy 2/3 of the Federation space fleet at Konpei Island. The GP02A is later destroyed in a heated battle with the GP01Fb Gundam Zephyrantes Full Burnern.

Art of this kits:

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon

- Successor to the popular Asshimar, Mobile Suit Gundam Unicorn Episode 5`s Anksha joins the ever-expanding HG lineup!

- Appearing in the upcoming Mobile Suit Gundam Unicorn Episode 5, this massive Suit features a transformation mechanism and huge mounted weapons!
- Transforming gimmick utilizes a replacement system to shift into the disc-shaped MA form.
- Includes dedicated display stand to display in MA or MS form. Other suits can utilize MA form as a sub-flight system, adding another layer of play with this massive HG!
- Deployed in 0096 as a support unit, the EFF-fielded Anksha improves on the older Asshimar designs to provide support and mobility to the Jegan units. A conceptual machine, the Anksha can shift into a mountable high-speed sub-flight system for aerial maneuvers.

- Accessories: 

• Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  
• August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  
• With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  
• Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  
• Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  
• Rear leg armor enables better range of motion in the ankle joints. 
  
• Includes paintable material for the internal structure for easy detailing.
  
• Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka
  

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700