• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Brand

Availability

Gundam Model Kits

Showing 1441 - 1470 of 2675 products

Quick View
img
SAVERM78.90

RE/100 Gundam Mk-III

  • The second release in the new RE/100 category, Gundam Mk-III from "Mobile Suit Z Gundam MSV" has arrived. 
  • With sharp modeling comparable to MG (Master Grade), the appearance of every part of the mobile suit is highly detailed, and elicits the full allure of it. 
  • Although utilizing a frameless structure, this kit combines movability with detailed modeling by a sophisticated parts structure. The time required to build the Gunpla is drastically reduced. 
  • The utilization of a new poly-cap design consolidates three kinds of movability, and that results in a simple but dynamic maneuverability. 
  • The Beam Cannon on the Backpack can swing back and forth. 
  • Along with a beam rifle, beam sabers the Energy-Capacitor and shields, flat hands and hands for gripping a weapon are included. 
  • Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1 

RM130.00
RM130.00 Request Stock
Quick View
img
SAVERM23.90

[397] Legend SDBB Musha Victory

  • - Warrior Fei Khatri appeared to LEGENDBB!
  • - BB Senshi No.397 [LEGENDBB] Series No. 11 bullets to No.377 warrior 號斗 round of the elder brother, warrior Fei Khatri appeared. Flying along with the voice of [divine protean] [steel 迦楼 Luo] is also included.
  • - [Steel 迦楼 Luo] is attached also possible as [golden plumage] by recombinant. Tsubasa is also reproduced the unfolded state in replacement. Mekiba flash 爆星 and Mekiba flash gun is also possible to have on hand.
  • - By combining the various parts diatomaceous mode, and can reproduce the respective embodiments.
  • - Yeol 旋丸 and flash wing is reproduced with clear parts of lame.
  • - To achieve a free movable joints throughout, including a golden robe.
  • - Accessories: - Yeol 旋丸, steel 迦楼 Luo (metal Garuda), flash wing (beam wing)

RM48.00
RM48.00 Request Stock
Quick View
img
SAVERM41.95

[005] HG Reconguista in G 1/144 Space Backpack for Gundam G-Self

  • The Gundam as optional parts of HG Gundam G · Self becomes the main story even middle or later [universe pack]
  • Accessories: Space pack, core Fighter, beam rifle, shield, exhibition base

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM55.50

[006] HG Reconguista in G 1/144 Space Jahannam (Mass Production Type)

  • From "Gundam Reconguista in G", a new mass production machine of Ameria, arrives. 
  • The distinctive camera eye is made with clear parts that utilize UV-reflecting materials and with marking stickers. 
  • Weapons such as a beam rifle are included. Two kinds of beam axes are included, one is unfolded and the other is folded. 
  • Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM28.40
RM28.40 Request Stock
Quick View
img
SAVERM48.94

[007] HG Reconguista in G 1/144 - Space Jahannam Klim Nick USE (Commander Type)

  • From "Gundam Reconguista in G", Space Jahannam Klim Nick Use comes in a kit form. 
  • The blade antenna, the commander's　distinguishing feature, is recreated. The camera eye is recreated with clear parts and marking stickers. 
  • Each joint moves flexibly. You can make it strike various poses. 
  • Along with left and right flat hands, left and right hands for gripping a weapon are also included. 
  • Includes various weapons such as a beam rifle and beam axes. 
  • Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1 

RM35.00
RM35.00 Request Stock
Quick View
img
SAVERM17.90

[027] HGBF 1/144 High Mock

  • An update to the blank slate Suit, Build Fighters Try's High Mock joins the HG lineup! 
  • Following in the footsteps of the older Mock, the High Mock is a combat training Suit with a wide range of customization options  
  • Can be equipped with almost any other Suit's weapons, and features a universal joint on the back to mount extra accessories.  
  • Can utilize 1/100 scale accessories using alternate wrist pieces. 
  • Accessories: Rifle 
  • Item Size/Weight : 29.9 x 19 x 4.8 cm / 210g

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM28.90

[39] HG 1/144 Murasame Production Type

  • Large missile attached to direct the attack scene.
  • The numbering seal comes to be aware of the formation of plural.
  • Use a poly-cap mechanism, the deformation of the flight to form reproduced by the replacement part.
  • Landing gear attached. I reproduce the weight tire deformation.
  • Use the HG series dedicated pedestal, reproducible crabbing, the inverted flight.
  • Item Size/Weight : 31 x 19 x 7.6 cm / 330g

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM7.90

[396] SDBB Build Burning Gundam

  • Accessories: effect parts (punch, back, vernier injection parts), chop hand (left and right)

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM48.40

P-Bandai Exclusive: RG 1/144 Gundam Astraea Type-F

P-Bandai Exclusive: RG 1/144 Gundam Astraea Type-F

RM251.40
RM251.40 Request Stock
Quick View
img
SAVERM16.50

P-Bandai Exclusive: RG 1/144 GNY-001 Gundam Astraea Expansion Unit

  • for RG 1/144 Exia use only (that is being sold seperately).
  • This set consists of parts for the Exia to be modified to become RG Astraea.
  • It also comes with armor like GN Launcher, Proto GN Sword, etc.

RM113.40
RM113.40 Request Stock
Quick View
img
SAVERM14.30

P-Bandai Exclusive: HGBF 1/144 Star Build Strike Gundam [RG System]

  • Uses clear molded MS body white, red, blue, light blue, yellow, pink, all colors!
  • Light blue part, more lameculia molding and transparency is expressed.
  • plavsky wing and plavsky power gate Kit is included!
  • color resin molding shimmer in a glamorous finish!
  • Parts joint of each movable plavsky wing and plavsky power gate,
  • Can be adjustable according to the action scenes.
  • The universe booster can be separated from the back of MS, transforms into a fighter.
  • Lively poses made possible with stand.
  • Armed Accessories: Star beam Cannon, Star beam rifle, beam Saber, absorb shield

RM115.60
RM115.60 Request Stock
Quick View
img
SAVERM40.40

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM84.90

Gao Gao MG 1/100 Gundam Exia (Ignition Mode)

Gao Gao MG 1/100 GUNDAM EXIA (IGNITION MODE)
Series: Gundam
Grade: Master Grade
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Product

RM95.00
RM95.00 Request Stock
Quick View
img
SAVERM21.90

[023] SDBF Winning Gundam

  • The original SD Gundam build by Fumina Hoshino appears as SDBF. 
  • Transforms from "SD Gundam Mode" into the Flight Mode. 
  • The main body can be separated to become "Core Fighter" and "Core Booster". Various forms such as "Winning Knuckle" and "Winning Launcher" can be recreated by changing parts. 
  • Weapons such as a beam bowgun and optional parts for transformation are included. 
  • Runner x6, Foil sticker x1, Instruction manual x1 

RM38.00
RM38.00 Request Stock
Quick View
img
SAVERM14.20

[016] HGBC 1/144 Ez-Arms

  • New Gunpla from "Gundam Build Fighters Try" comes out. 
  • Connected with GUNDAM Ez-SR, it can form various types of equipments and weapons. 
  • Runner x3, Foil sticker x1, Instruction manual x1 

RM21.70
RM21.70 Request Stock
Quick View
img
SAVERM32.93

[025] HGBF 1/144 Mega-Shiki

A variant of the Hyakushiki used in Gundam Build Fighters Try! The Hyaku Shiki from Gunpla Builders Beginning was simply a white recolor, but this HG kit is much more! Featuring sleek redesigns on the feet and a massive Heavy Weapon System-esque backpack, this kit stands out for more than just its blue color! Built by Minato Sakai, this version of the Shiki comes with two beam sabers, a beam rifle, and a backpack that can transform into a flight support unit! Dynamic poses can be reproduced with each joint that moves flexibly. A gun, binders and an engine block on the back pack are movable. The back pack is removable. It can be transformed into the mega flyer mode and mega rider mode or a mega launcher.

RM75.00
RM75.00 Request Stock
Quick View
img
SAVERM14.20

[017] HGBF 1/144 Mega Ride Launcher

RM21.70
RM21.70 Request Stock
Quick View
img
SAVERM23.95

[032] HG 1/144 Gundam Dynames (Trans-Am Mode)

The sharpshooting Gundam Dynames from the first season of "Mobile Suit Gundam 00" takes aim once again in Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Dynames but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode. Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor. The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of reflective hologram foil stickers is included for detail.


Accessories:
-  GN sniper rifle
- GN full shields x 2
- GN shields x 2
- Beam sabers x2 

RM48.00
RM48.00 Request Stock
Quick View
img
SAVERM94.90

MG 1/100 MS-07B Gouf Ver. 2.0

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  

A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.

In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!

Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.

RM133.00
RM133.00 Request Stock
Quick View
img
SAVERM79.90

MG 1/100 MS-09 Dom

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  
Bandai's Master Grade Dom is here! Whereas some of the kits in the Master Grade series have their overall appearance changed somewhat from the original Gundam animation, the Dom is quite true-to-form, retaining the short, stocky proportions of the original. But all the Master Grade goodies you'd expect are here! Fully-posable at all joints; extensive internal detail; individually-posable finger joints; numerous weapons, including the laser sword, machine gun, two bazookas and Panzerfausts. Most of these mount right on the Dom's back or hips for firing and/or storage. Of course, the kit is also molded in color, and features snap assembly. Have fun!

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM43.90

[029] HGBF 1/144 Hi-Nu Gundam VRABE

Used in the Gundam build fighters manga, it is the custom unit made by a young Yuuki Tatsuya prior to becoming Mejin. Different armor proportions, styling, and shapes compose this version of the popular hi nu producing a sleek variant never seen before. The bird like Vrabe booster can be recreated using the shield the shield and various backpack components. Runner x 8 foil sticker x1, instruction manual. Package dimensions: 12x7.5x3".

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM114.80

MG 1/100 Gundam Exia Dark Matter

  • Accessories: Prominence Blade, plies Nickl Blade, Dark Matter rifle, dark matter Blade × 2, beam saber × 2, beam saber (short) × 2

RM185.00
RM185.00 Request Stock
Quick View
img
SAVERM60.63

[009] HG Reconguista in G 1/144 Gaeon

  • Each joint is flexible to move. 
  • Various weapons such as the distinctive Big Arm Unit or the beam rifle are included. 
  • Each joint of the Big Arm Unit is widely movable. 
  • You can recreate the Big Arm Unit in shield mode and in spread mode. 
  • Runner x11, Foil sticker x1, Instruction manual x1 

RM47.30
RM47.30 Request Stock
Quick View
img
SAVERM37.73

[008] HG Reconguista in G 1/144 Elf Bullock (Mask Custom)

  • - Early variable machine Elf Brook manipulate the nemesis mask Captain lineup!

    - The HG of the state-of-the-art machine Elf Brook Capital Amyi. While reproduce the deformation mechanism to flight form, proportions and action of even both. Characteristic beam saber is reproduced in the clear orange UV reaction material.
    - Replacement parts for deformation and beam saber is included. Blade of the beam saber is molded in clear orange (UV reaction material).
    - By replacing the shin parts, and reproduce the beam saber deployment state. The supplied dedicated base, in saber deployment also display possible. Dedicated base MS form, also corresponds to either flight form.
    - Fine detail also reproduce the setting color molding color and foil seal of the head.
    - Also long-distance booster included. It can reproduce the flight form by parts replacement.

    - Accessories: beam saber × 2, for exhibition pedestal

RM70.20
RM70.20 Request Stock
Quick View
img
SAVERM21.00

P-Bandai Exclusive: MG 1/100 Gundam Astray Red Frame

  • Color reproduction of precision parts split in if MG frame characteristic, the exterior.
  • Apart from the weapon Gerbera Straight typical Gundam Astray Red Frame, it is attached with our one and the other brother is a sword, the Tiger Pierce.
  • Mountable new parts are supplied with two swords in the lower back.
  • Figures of the same scale of low Gyuru is attached. (Standing / cockpit)
  • Other personal mark of wax, Gerbera Straight "chrysanthemum character", Tiger Pierce of "tiger rut",
  • Water transfer decal attached formula was recorded in abundance as well as caution mark.
  • Armed included: Gerbera Straight, Tiger Pierce, beam rifle, beam saber, shield
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM278.80
RM278.80 Request Stock
Quick View
img
SAVERM33.80

[028] HGBF 1/144 Try Burning Gundam

  • Each section has wide range of movement such as twisting the body at the waist to make dynamic fighting action poses. 
  • The armor purge mode can be recreated by replacing parts. 
  • Battle actions in "Jigen Hao Ryu" style can be produced with various hand parts. 
  • Effect parts are included to recreate battle scenes. 
  • Joint parts are included to customize your model. 
  • Runner x10, Foil sticker x1, Instruction manual x1

RM86.00
RM86.00 Request Stock
Quick View
img
SAVERM14.97

[020] HGBC 1/144 Lightning Back Weapon System Mk-II

  • Accessories: new beam rifle
  • Suited for Lightning Gundam

RM33.00
RM33.00 Request Stock
Quick View
img
SAVERM29.08

[LIMITED] HGUC 1/144 RX-78-2 Gundam (7-Eleven Ver.)

  • This is Bandai x 7-11 Chain Store production of special limited release of HG Gunpla.
  • This is for 7-11 collectors~
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM150.80
RM150.80 Request Stock
Quick View
img
SAVERM49.90

HGUC 1/144 GUNDAM OPERATION V SET

  • Special Edition manual and special marking seal that can dress up the three aircraft of the V strategy.
  • A Set of 3 Gundam Gun Cannon Guntank of HGUC which includes RX-78, RX-77, RX-75

RM106.00
RM106.00 Request Stock
Quick View
img
SAVERM35.93

[026] HGBF 1/144 Gundam Amazing Red Warrior

  • From "Gundam Build Fighters Try", the Gunpla, having the name of "Amazing" joins the HG series. 
  • The open mode of missile hatches on the chest and front armor can be recreated by replacing the parts. 
  • Dynamic poses can be reproduced with each joint that moves flexibly. 
  • Various weapons are included, such as a hyper bazooka, a beam gatling, a short gun blade, a long gun blade, beam rifles and a beam saber. 
  • Includes original marking stickers. 
  • Runner x11, Foil sticker x1, Instruction manual x1

RM72.00
RM72.00 Request Stock

Showing 1441 - 1470 of 2675 products