Price Clear







Showing OTHERS product(s)

Showing 121 - 150 of 542 products

img
PO PriceRM340.00

S.H.Figuarts CHAR AZNABLE

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
From Mobile Suit Gundam, the Principality of Zeon\'s ace pilot, the Red Comet, Char Aznable, is now available in SHFiguarts.

The Red Comet, Char Aznable, has finally made an appearance in the SHFiguarts series. While pursuing beautiful proportions, the movable gimmicks have been carefully designed to recreate Char\'s famous scenes. In addition, a wide range of poses and scenes can be recreated with the abundant replacement parts.

From Mobile Suit Gundam, the Red Comet, Char Aznable, has finally appeared in SHFiguarts.
The beautiful proportions recreate the graceful pose that is so characteristic of Char.
Pursuit of a range of motion that allows for the reproduction of impressive poses.
Flexible shoulder movement allows for a variety of poses of Char.
The hip joint extension mechanism allows you to recreate a natural sitting pose!
Dynamic action poses are possible using the included beam gun!
Newtype effect parts allow for a wider range of scene reproductions.
Char\'s distinctive facial expression is reproduced.
Comes with a variety of interchangeable facial parts and interchangeable wrist parts.

[Set contents]
Main unit
?Interchangeable wrist parts: 3 types for the left and 4 types for the right
- 4 types of interchangeable facial parts
?Beam gun
?Gun joint
?Newtype effect parts

- Total height: approx. 155mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM380.00

S.H.Figuarts Jonathan Joestar

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM380.00
- Deposit RM50.00, Balance RM330.00
- We will inform to make balance RM330.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
This is a posable action figure.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM180.00

GM Model 1/72 Solardian Model Kit With Metal Inner Frame

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2025
Estimate arrival : SEPT 2025

- P-O Price RM180.00
- Deposit RM30.00, Balance RM150.00
- We will inform to make balance RM150.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

- Height from button to top 25cm ; Shoulder height 33cm
- Built-in finished alloy frame
- With multiple linkage structure
- The shield has an explosive structure
- The two swords can be freely combined to transform into various combat forms
- The machine comes with four floating guns that can be flexibly mounted on the shoulder armor.
- The number of parts of this product can reach more than 690 pieces, and the number of runners can reach 31 sets.

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM250.00

[IRON TOYS] 1/100 TC-04 Star Abyss Plastic Model Kits with Metal Inner Frame

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAY 2025
Estimate arrival : JUN 2025

- P-O Price RM250.00
- Deposit RM50.00, Balance RM200.00
- We will inform to make balance RM200.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Iron Toys 1/100 TC-04 Star Abyss Plastic Model Kits with Inner Frame

Brand : Iron Toys
Code : TC-04
Model : Star Abyss

As the first ?-Frame series assembly model of "Iron Toys", it has a multiple internal skeleton detail design and rich modeling expression. The body has a fast deformation structure and can be switched to a cruise fighter form. The height in the fully equipped form exceeds 40cm, and the number of combined parts reaches 1000+.

Contents :
* Main body + Star Wars backpack
* 3 head replacement components (including 2 complete heads and a set of mask replacement parts)
* Leg long-distance propulsion replacement component x 1
* Quantum scissor blade type I x 2
* Quantum scissor blade type II x 2
* Floating scissor blade x 12
* Floating scissor blade universal scattering bracket x 1
* Knob-type storage platform bracket x 1

Bonus:
* Multi-mode magnetic control LED light set x 3
* DIY colorless transparent parts 1 set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM340.00

S.H.Figuarts Yami Yugi

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The history of fierce duels is brought to life through the SHFiguarts series.

The long-awaited SHFiguarts is now available in the Yu-Gi-Oh! Duel Monsters series! The first release features Yami Yugi! In addition to the impressive optional parts, the set also includes the powerful Sacred Barrier - Mirror Force effect parts! By including a set of parts that symbolize Yami Yugi, such as his Duel Disk and fluttering school uniform, you can recreate various scenes from the show!

Introducing Yami Yugi in the action figure series SHFiguarts! The carefully crafted design and movable mechanism have been thoroughly verified based on the animation in the show, achieving both mobility and aesthetic beauty!
The [Holy Barrier - Mirror Force] effect parts are included, allowing you to combine it with [Yami Yugi] to recreate the trap activation scene!
Combine with the separately sold SHMonsterArts Yu-Gi-Oh! series to recreate hot battle scenes!
In addition to a wide variety of hand parts, various optional parts are included that allow you to recreate all kinds of situations featuring Yami Yugi!

[Set contents]
Main unit
- 7 types of interchangeable wrist parts (left and right)
- 4 types of interchangeable facial parts
- [Holy Barrier -Mirror Force-] effect parts set
Millennium Puzzle
Duel Disk set

- Total height: approx. 160mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM320.00

S.H.Figuarts Narumi Gen

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM320.00
- Deposit RM50.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Narumi Gen from the anime "Kaiju No. 8" joins the "S.H.Figuarts" action-figure lineup from Bandai! He's sculpted with proportions inspired by his appearance in the show; he's supremely posable, too, so you can recreate lots of awesome poses! His large custom weapon is included, which features a transformation gimmick to expand the scope of play. Two interchangeable faces and an interchangeable hair part are also included, so you can display him with his hair pulled back for battle. As a bonus part, an interchangeable face for the "S.H.Figuarts" Kaiju No. 8 is also included! Order him for your own collection today!

[Figure Size]: Approximately 14.5cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable faces (x2)
Interchangeable hands (left and right, x2 each)
Interchangeable hair parts
Weapon
Facial expression for S.H.Figuarts Kaiju No. 8 (figure not included)

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM170.00

S.H.Figuarts Mario (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM170.00
- Deposit RM50.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Bandai's awesome "S.H.Figuarts" fully posable figure of Mario himself from "Super Mario" is back! He's fully articulated to recreate his iconic poses from any of his many video game appearances. He comes with a Super Mushroom, a "?" block, a coin and a coin stand. Don't miss this chance to add one of history's most beloved video game characters to your own collection -- place your order today!

[Figure Size]: Approximately 10cm tall
[Materials]: ABS, PVC


[Set Contents]:

Main figure
Interchangeable hands (left and right)
Super Mushroom
Question Mark Block
Coin
Coin Support
Base mounting parts (back)
Base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM170.00

S.H.Figuarts Luigi (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM170.00
- Deposit RM50.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Bandai\'s awesome \"S.H.Figuarts\" fully posable figure of Luigi from \"Super Mario\" is back! He\'s fully articulated to recreate his iconic poses from any of his many video game appearances. He comes with a brick, a red shell, and a base for display. Don\'t miss this chance to add one of history\'s most beloved video game characters to your own collection -- place your order today!

[Figure Size]: Approximately 11cm tall
[Materials]: ABS, PVC


[Set Contents]:

Main figure
Interchangeable hands (left and right)
Brick Block
Red Shell
Red Shell joint parts set
Base mounting parts (back)
Base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM330.00

S.H.Figuarts Yoshi (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2026
Estimate arrival : APR 2026

- P-O Price RM330.00
- Deposit RM50.00, Balance RM280.00
- We will inform to make balance RM280.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Here comes Yoshi! The adorable green dinosaur from the "Super Mario Bros." video games returns to the "S.H.Figuarts" action-figure series from Bandai, and he's ready for fun! He comes with an extended tongue, interchangeable arms and hands, and a polka-dotted egg to hurl at enemies; he also has a special figure stand and back attachment so either Mario or Luigi can ride on him! Order him today and get ready to recreate all your favorite "Super Mario Bros." scenes!

[Figure Size]: Approximately 11cm tall
[Materials]: ABS, PVC

[Set Contents]:

Main figure
Interchangeable right hand part
Yoshi's egg
Interchangeable tongue 
Interchangeable eye part
Back part for Mario
Back part for Luigi
Base for display

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM350.00

S.H.Figuarts (SHINKOCCHOU SEIHOU) New Cyclone (Kamen Rider) Legendary Showa Riders Edition

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM350.00
- Deposit RM50.00, Balance RM300.00
- We will inform to make balance RM300.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The New Cyclone, the exclusive machine of the Double Riders from "Kamen Rider," is returning to Bandai's "S.H.Figuarts" lineup as the Legendary Showa Riders Edition! It features renewed coloring and new optional parts to match the "S.H.Figuarts" Shinkocchou Seihou Kamen Rider New No. 1 Legendary Showa Riders Edition, and the "S.H.Figuarts" Kamen Rider New No. 2 Legendary Showa Riders Edition (each sold separately). 

This motorbike that appeared in the original "Kamen Rider" series is faithfully recreated, with clear parts used for the screen and infrared headlights. It's equipped with movable handlebars, deployable side stand, and a rear wheel suspension extension gimmick. The block pattern of the front and rear tires and the spark wheels are precisely reproduced too. The lower parts of the body and the tail are painted to express the dirt caused by harsh driving conditions and intense action, and new coloring has been added to the details such as the wings. 

The wings on both sides of the front cowl can be reproduced with parts replacement, and new hand parts with the index and middle fingers on the levers are included for both the "S.H.Figuarts" Shinkocchou Seihou Kamen Rider New No. 1 Legendary Showa Riders Edition and the "S.H.Figuarts" Kamen Rider New No. 2 Legendary Showa Riders Edition. A large, fluttering PVC scarf for each figure is also included! Order yours today!

[Size]: Approximately 19cm long
[Materials]: ABS, PVC

[Set Contents]:

* Main vehicle
* Wing parts for cowl (left and right)
* Rear wheel stand
* Interchangeable hands (left and right) for "S.H.Figuarts" Shinkocchou Seihou Kamen Rider New No. 1 Legendary Showa Riders Edition and "S.H.Figuarts" Kamen Rider New No. 2 Legendary Showa Riders Edition
* Scarf parts for "S.H.Figuarts" Shinkocchou Seihou Kamen Rider New No. 1 Legendary Showa Riders Edition and "S.H.Figuarts" Kamen Rider New No. 2 Legendary Showa Riders Edition

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM340.00

S.H.Figuarts Ochaco Uraraka

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The 5th release of the SHFiguarts My Hero Academia series! Introducing Ochaco Uraraka from the TV anime My Hero Academia!

Experience the floating hero action that only Uravity can provide!

Introducing Ochaco Uraraka in the action figure series SHFiguarts! The carefully crafted design and movable mechanism have been thoroughly verified based on the animation in the show, achieving both mobility and beauty of form!
As a special part, it comes with a head part that recreates the appearance of Toga Himiko transforming into Uraraka Ochaco at the climax of the movie!
The moving mechanism was designed by working backwards from the action in the movie, allowing you to create poses that give the illusion of floating!
A wide variety of optional parts are included, allowing you to recreate various situations featuring Ochaco Uraraka!

[Set contents]
Main unit
Interchangeable wrist parts: 4 left, 5 right
Interchangeable wrist parts for both hands
- 3 types of interchangeable facial parts
Replacement hair parts
Loudspeaker
Wire x 2

[Special parts]
Toga Himiko head parts set

- Total height: Approx. 130mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM280.00

S.H.Figuarts Chainsaw Man -The Movie Chainsaw Man Reze-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM280.00
- Deposit RM50.00, Balance RM220.00
- We will inform to make balance RM220.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The 7th release in the SHFiguarts [Chainsaw Man] series! Chainsaw Man in his costume from the movie [Chainsaw Man Reze Arc] is now available in SHFiguarts !!

From the movie \"Chainsaw Man: Reze\", Chainsaw Man is turned into an action figure in his new costume!! Redesigned to match the costume in the movie! With even more mobility! Enjoy the immersive action scenes from the movie! *This product has been produced and commercialized based on the characters and battle scenes from the work.

[A spectacular bloody battle involving love and desire, humans and demons alike] is reproduced in spectacular fashion with SHFiguarts !
The fluttering shirt, unique to this work, makes the action even more realistic.
The chainsaw design has also been completely revamped in this game! Experience the difference!
The tongue of the replacement lower jaw part can be moved freely, allowing you to express the various expressions seen in the movie version.
The action scenes from the movie can be recreated thanks to the carefully crafted range of motion!

[Set contents]
Main unit
- Replacement wrist parts (2 types each for left and right)
Replacement lower jaw parts

- Total height: approx. 150mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM150.00

Tekupiku Suguru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Suguru Geto from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 
These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 
The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM150.00

Tekupiku Satoru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Satoru Gojo from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM150.00

Tekupiku Yuji Itadori

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Yuji Itadori from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM340.00

S.H.Figuarts Metaphor: ReFantazio Protagonist

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The protagonist from Metaphor: ReFantasio is now available in SHFiguarts.

The first in the SHFiguarts [Metaphor: ReFantasio] series. A wide variety of optional parts, such as a [Ride Sword], are included, allowing you to recreate various scenes from the game.

As SHFiguarts is an action figure series, it is possible to recreate a variety of poses.
By using the included riding sword, you can also recreate the long sword riding style.
Two types of interchangeable facial parts are included: [Smiling] and [Combat (mouth open)].
Thanks to the movable structure cultivated in the SHFiguarts series, dynamic battle scenes can be reproduced.
In addition to two interchangeable facial parts, interchangeable wrist parts include three types of left and one type of right, and optional parts include a shoulder bag, sword, riding sword, and a dedicated pedestal set.

[Set contents]
Main unit
- Interchangeable wrist parts: 3 types for the left and 1 type for the right
- 2 types of interchangeable facial parts
Shoulder bag
sword
- Ride sword
Dedicated pedestal set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM150.00

Tekupiku Megumi Fushiguro

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Megumi Fushiguro from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup!

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM170.00

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

Height:
Base Form: Approx. 15 cm
This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : JULY 2025

- P-O Price RM170.00
- Deposit RM30.00, Balance RM140.00
- We will inform to make balance RM140.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Armed Form: Approx. 18.5 cm
???? Materials: ABS, PS, Fabric
???? Contents: (25 runner sheets, including 3 with metallic coating)

Main Components

* Jiulian Base Form × 1
* Jiulian Armed Form × 1
* Replaceable [???] Special Helmet × 1
* Fabric Knee Cover × 1
* Alternative Hand Parts × 6 pairs
* Weapon-Grip Hand Parts × 5 pairs
* Facial Expressions × 4, Blank Faces × 5
* Large Chainsaws × 4
* Small Chainsaws × 2
* Meteor Hammer: Starshatter × 1, Replaceable Parts × 3
* Melee Claw Weapons × 2
* Interchangeable Chest Armor × 3
* Water Decals × 2 sheets
* Springs × 2
* LED Light Units × 2, Batteries × 4
* Display Base × 1, Transparent Support Rod × 1, Gray Support Rod × 1, Various Metal Accessories

First Batch Pre-Order Bonus:
* Soft Pink Skin Color Body Parts × 4 sheets
* Soft Pink Skin Color Alternative Hand Parts × 6 pairs
* Soft Pink Skin Color Facial Expressions × 4, Blank Faces × 5
* Exclusive Domestic Bonus: Character-Themed Collectible Transparent Card

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM350.00

S.H.Figuarts Jotaro Kujo

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2026
Estimate arrival : APR 2026

- P-O Price RM350.00
- Deposit RM50.00, Balance RM300.00
- We will inform to make balance RM300.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Jotaro Kujo from "JoJo's Bizarre Adventure: Stardust Crusaders" joins the "S.H.Figuarts" action-figure lineup from Bandai! This figure takes full advantage of the "S.H.Figuarts" technology for superior posability, with a focus on realistic anatomical balance in the sculpt and the ability to recreate characteristic poses without deviating from the physical structure. Stamina Digital Coloring is used to bring out his distinctive facial features to the fullest! The flowing hem of his school uniform can be recreated with the wired PVC sheet, and parts are included so he can be displayed with his hands in his pockets! Three interchangeable faces and seven pairs of interchangeable hands are included too. A base with a printed design is included so you can enjoy powerful posing with ease. Order him for your own collection today!

[Figure Size]: Approximately 17cm tall
[Materials]: PVC, ABS, fabric, metal

[Set Contents]:

Main figure
Interchangeable faces (x3)
Interchangeable hands (left and right, x7 each)
Pocket connection parts (left and right)
Dedicated base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM550.00

S.H.Figuarts Metaphor: ReFantazio Seeker

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM550.00
- Deposit RM50.00, Balance RM500.00
- We will inform to make balance RM500.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
[Seeker] from [Metaphor: ReFantasio] is now available in SHFiguarts.

The second release in the SHFiguarts [Metaphor: ReFantasio] series. The cape has built-in wires, allowing you to recreate various scenes from the game.

As SHFiguarts is an action figure series, it is possible to recreate a variety of poses.
By using the included [Ride Sword], the skill [Ride On Blade] can also be recreated.
The cape has built-in wires, allowing you to recreate various scenes from the game.
As a bonus part, an awakening device holding part that can be used with [SHFiguarts Metaphor: ReFantasio Protagonist] (sold separately) is included.
Interchangeable wrist parts include three types for the left and two types for the right, and optional parts include a sword, a riding sword, and a dedicated pedestal set.

[Set contents]
Main unit
- Interchangeable wrist parts: 3 types for the left and 2 types for the right
sword
Ride sword
Dedicated pedestal set
Pedestal connection parts

[Bonus parts]
[SHFiguarts Metaphor: ReFantasio Protagonist] Awakening Device Handle Parts

- Total height: approx. 190mm
- Material: PVC, ABS, fabric

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM170.00

HeMoXian x Toys Comic 1/100 Zodiac Guardian 002/ZG‐002 Baffarion

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUL 2025
Estimate arrival : AUG 2025

- P-O Price RM170.00
- Deposit RM20.00, Balance RM150.00
- We will inform to make balance RM150.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
HeMoXian x Toys Comic 1/100 Zodiac Guardian 002/ZG?002 Baffarion 

Model Height : 23cm
Scale : 1/100
Material : ABS / PS
Series : Zodiac Guardian
Model name : Baffarion 

Kit Contents:
1. Runners x 36 pieces
2. Bull Destroyer x 2
3. Bull Horn Shield x 2
4. Guards II Particle Rifle x 2
5. Ganjiang Sonic Sword x 2
6. Base x 1
7. Water Sticker x 1

First Release Bonus:
8. [God Guardian Mode] Transparent Special Effect Parts × 3 pieces

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
img
PO PriceRM135.00

Plamo Loving Alien MG 1/100 RMG-88X JIEDA Plastic Model Kits

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM135.00
- Deposit RM20.00, Balance RM115.00
- We will inform to make balance RM115.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Plamo Loving Alien MG 1/100 RMG-88X JIEDA Model Kits

Height : About 22CM

Contents :
* Hand Shape x4 Pairs ( Fist, Palm, Gun-Shaped Hand, Lightsaber Hand )
* Beam Knife x2
* Blue Sensor LED Light x1
* Build Fighters Storage Platform x1
* Snake Bone Bracket x1

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
img
PO PriceRM480.00

Figuarts Zero chouette Ranma

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM480.00
- Deposit RM100.00, Balance RM380.00
- We will inform to make balance RM380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Ranma-chan from the TV anime \"Ranma 1/2\" is now available in Bandai\'s \"Figuarts Zero chouette\" series! The figure\'s base is inspired by the Jusenkyo spring, with Ranma rising up out of the water with a splash! Mist swirls around her, emphasizing her cute smile and pose. You\'ll love her -- order her for your own collection today!

[Figure Size]: Approximately 20cm tall
[Materials]: PVC, ABS

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
PO PriceRM480.00

Figuarts Zero chouette Shampoo

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM480.00
- Deposit RM100.00, Balance RM380.00
- We will inform to make balance RM380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Shampoo from the TV anime \"Ranma 1/2\" joins Bandai\'s \"Figuarts Zero chouette\" figure lineup! Her base is inspired by Jusenkyo Springs, with a splash of water and a swirl of mist heralding her hovering over the spring! You\'ll love her cute smile and relaxed pose -- order her for your own collection today!

[Figure Size]: Approximately 17cm tall
[Materials]: PVC, ABS

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Add to cart
img
PO PriceRM1000.00

Figuarts Zero Touche Metallique Gemini Saga

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : APR 2025
Estimate arrival : MAY 2025

- P-O Price RM1000.00
- Deposit RM200.00, Balance RM800.00
- We will inform to make balance RM800.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Gemini Saga from the anime series \"Saint Seiya\" joins Bandai\'s \"Figuarts Zero Touche Metallique\" lineup! He\'s been recreated with his cape flowing behind him as he prepares to unleash his power; parts of his armor are made with plated parts for a luxurious gleam! Clear parts are used for the flame effect parts on the base and the Galaxian Explosion effect part, bringing you right into the world of the anime! The base is modeled after a collapsing temple, with its stone columns contrasting sharply with the vivid flames. A collection sheet is included. Order him for your own collection today!

[Figure Size]: Approximately 21cm tall
[Materials]: ABS, PVC

DEPOSIT: RM200.00
DEPOSIT: RM200.00 Add to cart
img
PO PriceRM178.00

HeMoXian x Nakara Bladepoint Yue Shan 1/15 Scale -Dragon Call- Model Kit Standard Edition

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : SEPT 2025

- P-O Price RM178.00
- Deposit RM30.00, Balance RM148.00
- We will inform to make balance RM148.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Name: Hemoxian x Nakara Bladepoint Yue Shan -Dragon Call- Model Kit Standard Edition
Brand : Hemoxian x Nakara Bladepoint
Type : Plastic Model Kit
Size : TBC
Scale: 1/15

Standard Contents Include:
- Yinglong Unit x 1
- Backpack x 1
- Main Weapon (Long Spear) x 1
- Beam Swords x 2
- Composite Shield Blade x 1
- Body Flame Effects x 10
- Weapon/Backpack Flame Effects x 6
- Red Emblem Display Base x 1
- Light-Up Unit x 1
- Water Decal  x 1

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM260.00

HeMoXian x Nakara Bladepoint Yue Shan 1/15 Scale -Dragon Call- Model Kit Collector Edition

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : SEPT 2025

- P-O Price RM260.00
- Deposit RM50.00, Balance RM210.00
- We will inform to make balance RM210.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Name: Hemoxian x Nakara Bladepoint Yue Shan -Dragon Call- Model Kit Standard Edition
Brand : Hemoxian x Nakara Bladepoint
Type : Plastic Model Kit
Size : TBC
Scale: 1/15

Collector\'s Edition Contents Include:
- Pre-painted finish (electroplating, titanium white, iridescent coating, etc.)
- Yinglong Unit x 1
- Backpack x 1
- Main Weapon (Long Spear) x 1
- Beam Swords x 2
- Composite Shield Blade x 1
- Body Flame Effects x 10
- Weapon/Backpack Flame Effects x 6
- Red Emblem Display Base x 1
- Light-Up Unit x 1
- Water Decal  x 1

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM320.00

S.H.Figuarts Toji Fushiguro

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM320.00
- Deposit RM50.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Toji Fushiguro from "Jujutsu Kaisen" is now an "S.H.Figuarts" action figure from Bandai! The figure's silhouette and movable structures have been meticulously crafted to recreate the character's incredible dynamism. The use of fluttering hair parts allows for natural poses during combat, and the included stored cursed spirit has been adjusted to make it easier to wrap around the figure, while the thickness and width have been carefully adjusted to preserve the character's range of motion. As a bonus, a set of interchangeable head parts for "S.H.Figuarts" Satoru Gojo -Jujutsu High School- (sold separately) is included! The Cursed Sword and the Ten'sakahoko are included too, allowing you to recreate battle scenes with Gojo Satoru and Geto Suguru from their days at technical college. Order him for your own collection today!

[Figure Size]: Approximately 15.5cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable faces (x3)
Interchangeable hair parts
Interchangeable hands (left and right, x3 each)
Interchangeable hands (both hands)
Stored Cursed Spirit
Interchangeable leg parts for Stored Cursed Spirit
Cursed Sword
Ten'sakahoko
Bonus part: interchangeable face for S.H.Figuarts Gojo Satoru -Jujutsu High School-
Bonus part: interchangeable bangs part for S.H.Figuarts Gojo Satoru -Jujutsu High School-

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM380.00

S.H.Figuarts Joseph Joestar

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2025
Estimate arrival : JAN 2026

- P-O Price RM380.00
- Deposit RM50.00, Balance RM330.00
- We will inform to make balance RM330.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
This is a posable action figure.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM800.00

Figuarts Zero Touche Metallique Guts (Berserker Armor)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM800.00
- Deposit RM100.00, Balance RM700.00
- We will inform to make balance RM700.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Guts in his Berserker armor from \"Berserk,\" the globally popular masterpiece of dark fantasy, is now part of the \"Figuarts Zero Touche Metallique\" lineup from Bandai! Ryu Oyama, an artist famous for his sculptures of creatures, has sculpted Guts in a spectacular form, as seen in the Battle of the Sea God! 

The Dragon Slayer great sword is partially plated for an assertive gleam, and the Sea God\'s tentacles are impressively detailed! 

This figure allows you to feel Guts\' overwhelming power -- order it for your own collection today!

[Figure Size]: Approximately 35cm tall
[Materials]: ABS, PVC


[Set Contents]:

* Main figure (including base)
* Collection sheet
* Display support parts

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Add to cart

Showing 121 - 150 of 542 products