Copyright Sotsu Agency / Sunrize Item Size 20.4 x 15 x 5.5 cm

Copyright Sotsu Agency / Sunrize Item Size 20.4 x 15 x 5.5 cm

-Assembling required -Comes with instruction booklet in Japanese

- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required. - Copyright Sotsu Agency / Sunrize Item Size/Weight : 31 x 20 x 11.4 cm / 510g

Gundam Avalanche Exia made its debut in the "Mobile Suit Gundam 00V" side story serialized in Hobby Japan magazine, and fans can now build the powerful mech with this sharp snap-fit model kit from Bandai! Molded in color and carefully detailed after mecha designer Kanetake Ebikawa's drawings, the Mobile Suit is equipped with its high-mobility hs-A01 Avalanche along with its Seven Sword System. Its armament includes a GN Sword capable of switching into rifle mode, two GN beam daggers, two GN beam sabers, a GN long blade, and a GN short blade. The mech features sharp mechanical detailing throughout, and will be fully articulated with polycap joints upon completion. Foil stickers and marking stickers are included. Weight: 650g

Accessories includes beam rifle and comes with a pistol shape and 2 sets bits. At least ten GN Rifle Bit IIs are stored within the GN Holster Bits, mounted on Zabanya's rear thruster block. Weapons-wise, GN Micro-Missiles are laced throughout its armor and the GN Holster Bits contain GN Rifle Bits within them. Expected to arrive on middle September, 2010

• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• Gundam 00 Raiser condenser mode made its appearance! 
• Active character in the early 00 movies. 
• Accessories: 
• GN Sword II × 2, 
• GN Sword III, 
• shield, 
• pedestal

• Raiser + GN Sword III of the final battle specification is the product of a normal color!
  
• Effects are clear parts. GN Sword II also included of course.
  
• Sword mode rifle mode can be converted to GN Sword III.
  
• Effects blade part of GN Sword III also reproduced in clear plastic.
  
• Accessories: GN Sword III x 1, GN Sword II x 2, GN beam saber x 2, GN shield x 1
  

Not just a recolor of the 2008 1/100 GN-0000 + GNR-010 00 Raiser Special Set, this excellent release offers a third light-up LED for the Mobile Suit's head, a brand new weapon, and all parts come molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of 00 Raiser!

Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode! Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser!

A sheet of foil stickers and a sheet of designer's marking stickers are provided.

Three LED button light are included without batteries.

Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

Copyright Sotsu Agency / Sunrize Item Size/Weight : 20.4 x 15 x 5.5 cm / 170g

Armors can be taken off to express NADLEE version. GN cannon on the shoulders can be slided to recreate battle mode. NADLEE's hair can be moved to express movement. GN bazooka in two modes (normal and battle mode). Double joint system in arm articulations. Waist supported with axis cover parts for balanced posing. Various wrists and foil stickers included.

Here -  is the HG series kit of the Gundam Virtue in Trans-Am Mode, as seen in the first season of Mobile Suit Gundam 00. The GN cannon barrel can extend, and the connector arm is posable, allowing for dramatic shooting poses from the show. The GN cannon and leg unit sides slide to open into GN field mode. GN bazooka barrel can slide to replicate burst mode. Foil stickers are printed in appropriate colors for Trans-Am mode as well.

• Characteristic GN Drive is accurately recreated! 
  
• Whole body specially designed to accommodate the GN-X’s unorthodox frame while keeping the MG range of motion and stability! 
  
• Cockpit hatch opens, and cockpit interior is detailed, and figures for both Peries and Sergei are included! 
  
• Following in the wake of the extremely successful Gundam Exia, the updated frame features the characteristic hex binder, and is built to allow maximum mobility! 
  
• Accessories: GN Beam Rifle, GN Beam Rifle Long Equipment, GN Beam Saber, GN Shield
  

• The main machine, 00 QAN[T], decided for release before the release of the movie! 
  
• The Bit Gimmick completely reproduced: The tip of Bit Blade has been formed with clear green. With the bit able to split, the battle scene from the promotion video can be reproduced! 
  
• Includes the 00 QAN[T] custom GN Sword. The mode change has also been recreated. 
  
• Clear parts have been used for the eyes, head, ears, and lens parts. 
  
• The bits can be detached. The binder part is mobile. 
  
• The swing action mechanism has continually been used, for obtaining a wide range of poseable area. 
  
• The Bits blade tip has been made with AFX material, with safety in mind. - Accessories: Bit, GN Sword Item Size/Weight : 302g
  

- 1 / 144 the size amazing transformation! Gandam Harute! - Reproduce the form of the transformation gimmick detachable rifle. - MS-time form, reproducing moving back binder. - Detachable backpack. Each movement in the base. - Accessories: Rifles × 2, Backpack. Item Size/Weight : 31 x 19.1 x 7.8 cm / 387g

• The official side-story MS, Gundam Avalanche Exia Dash! 
  
• Avalanche Exia Dash, active in the [Gundam 00V War Record]! 
  
• Comes with a stand base to enable display during flight. 
  
• Able to recreate Gundam Avalanche Exia by selection. 
  
• The newly set booster has been equipped with the folding gimmick. Able to be displayed without a stand base. 
  
• The additional leg armory has mobile mechanism, enabling flexible poses. 
  
• Accessories: GN Sword, GN Short Blade, GN Long Blade, GN Beam Saber (off) x4,GN Beam Saber (on), Stand Base.
  

The Cherudim Gundam joins the lineup of 1/100 scale precision models of Mobile Suits from Gundam 00. Shoulders incorporate a swing mechanism for enhanced mobility forward, back, up, and down, allowing for dramatic "aim and shoot" poses. Forehead-mounted sensor covers open for sniper mode, and the "follow screen" is molded in translucent plastic. GN shield bits can be removed and placed on a stand to re-enact scenes from the show. Includes GN sniper rifle II, and two GN beam pistol II guns.

• Gaiden Official MS, Astraea Type F of the new armed goods! 
  
• New settings, including militants, HG reproduced as heavily armed militants were used to scale! 
• Basic protocol as Astraea armed GN sword, shield, GN Launcher 
• GN beam rifle comes. 
• Add new armament: GN missile Hand, GN pistol, bazooka for jinx 
• New configuration: GN hammer ([thorn] GN reproduce the clear green parts of the jet of particles. Comes with a wire during injection can represent a hammer.) 
• Type F2 also available to the Assembly in the selection formula. 
• Accessories: proto GN sword, GN launcher, shield, GN beam rifle, GN missiles hand 
• GN beam saber × 2, GN pistol (with holster) × 2, bazooka jinx

• Accessories: GN Sword x— 1, GN shield x— 1, GN beam saber x— 2
  

Here's a sharp snap-fit plastic kit of Ali Al-Saachez's AEU Enact Custom Agrissa Type variable Mobile Suit that will be fully transformable upon completion! Capable of switching between MS Mode and Flight Position, this color-molded kit is packed with a blade rifle with slide-out blade, a defense rod that can be attached to either side of its arm, a sonic blade (plasma sword), and a missile launcher.

A mobile suit used by Innovades, the Gadessa features a long range Mega Launcher cannon weapon that can unfold like in the Gundam 00 TV series second season. A display stand is included.

A high grade of the mass produced Gundams in Gundam 00. Features GN beam rifle with interchangeable barrel for long range type, beam sabers and arm mounted shield.

Action base is not included.