• Home
  • Showing METAL PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing METAL PARTS product(s)

Showing 121 - 150 of 164 products

Quick View
img
SAVERM27.50

[Metal Part] MG 1/100 Nu Gundam RX-93 Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Backpack thruster x4drill 2.0mm hole, attached to point with minor cement
2.Upper Calf thruster x2drill 1.5mm hole, attached to point with minor cement
3.Lower Calf thruster x4drill 1.5mm hole, attached to point with minor cement
4.Leg thruster x4Combined with leg thruster to extend thruster effect
5.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
6.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Metal leg joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
12.Metal Shoulder joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
13.Armor screw x30drill 2.0mm hole, attached to point with minor cement
14.Armor Aviation port x10drill 1.6mm hole, attached to point with minor cement
15.Metal beads x50drill 1mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM91.00
RM91.00 Request Stock
Quick View
img
SAVERM4.49

[Metal Part] U1 Metallic Black Air Vents / Thruster for Gundam Kit - 8pcs

  • Easy installation
  • Colour : Metallic Black 
  • Inner diameter: 4mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (8 vents)
  • MG F.A. Unicorn Gundam (8 vents)
  • MG Nu Gundam Ver KA (8 vents)

RM13.50
RM13.50 Request Stock
Quick View
img
SAVERM4.49

[Metal Part] U1 Metallic Silver Air Vents / Thruster for Gundam Kit - 8pcs

  • Easy installation
  • Widest diameter:8.5mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (8 vents)
  • MG F.A. Unicorn Gundam (8 vents)
  • MG Nu Gundam Ver KA (8 vents)

RM13.50
RM13.50 Request Stock
Quick View
img
SAVERM21.60

[Metal Part] RG Char's Zaku Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check on the list below to find out the actual parts quantity.


Index		AccessoriesInstallation
1RG used Zaku Metallic LensDirect
2Energy pipe on headDirect
3Energy -  ?pipe on waistDirect
4Energy -  ?pipe on legsDirect
5Calf Ventdrill 2.5mm hole, to attached on the point; 10 units
6Backpack Red Colour Thrusterdrill 1.0mm hole, to attached on the point
7Soles Red Colour Thrusterdrill 1.5mm hole, to attached on the point
8Whole Body Armor screwsdrill 1.1mm hole, to attached on the point; 20 units
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • Tweezer straight/angled
  • Modelling kits cutter
  • Metal cutter
  • Plastic model kits cement
  • Magnifying glass

RM52.40
RM52.40 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 1.5mm Flat Head Screw * 30 units

  • Package include 30 units of 1.5 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 1.5 mm.
  • Thickness : 1.5 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM4.20

[Metal Part] Mixed Flat Head Screw 3.5 , 4.0, 4.5 each 10 units

  • Package include 30 units of flat head screws for modelling kits, diameter as below
  • 10 units of diameter 3.5 mm
  • 10 units of diameter 4.0 mm
  • 10 units of diameter 4.5 mm
  • Total 30 units
  • Thickness : 1.5 mm

RM9.80
RM9.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 2.0mm Flat Head Screw * 30 units

  • Package include 30 units of 2.0 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 2.0 mm.
  • Thickness : 1.5 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM5.85

[Metal Part] Aviation Hole 3.0mm for HG / MG Gundam model kits - 15 units

  • 3.0mm diameter - aviation hole.
  • Package include 15 units of aviation hole for modelling kits customization.
  • Thickness : 1.5 mm

RM7.15
RM7.15 Request Stock
Quick View
img
SAVERM12.30

[Metal Part] RG Sinanju Metal Enhancement Part Set

  • [Metal Part] RG Sinanju Metal Part Enhancement
  • Manual is available in the 'more image..' section, in chinese language.

RM127.60
RM127.60 Request Stock
Quick View
img
SAVERM10.00

[Metal Part] Stainless Steel Customize pile piling, hydraulic pipe - 1.0 mm (30 units)

Stainless Steel Customize pile piling, hydraulic pipe

Spec?Diameter 1.0 mm , Length 15 mm 

Quantity ?30 Pipe

RM8.00
RM8.00 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C2, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C2)

  • Specifications : Maximum diameter 6.5mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Joint stick : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 2mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 2 mm , Tube Length : 120 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 2.5mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 2.5 mm , Tube Length : 150 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM2.05

[Metal Part] Stainless Steel Spring Tube - 3mm (1 Unit)

[Metal Part] Stainless Steel Spring Tube for Customization 


Spec : Diameter : 3 mm , Tube Length : 200 mm

RM1.95
RM1.95 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C3, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C4, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C5, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C5)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (N1, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N1)

  • Specifications : Maximum diameter 6.0mm, Height 6.0mm, Joint hole Diameter 1.4mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.4mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Silver)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Silver 

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM9.20

[Metal Part] Energy Cable Tubes Pipes (L size, 5mm, Titanium Black)

5mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.40
RM10.40 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Titanium Black)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM7.30

[Metal Part] Energy Cable Tubes Pipes (S Size, 3mm, Titanium Black)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.3 mm , 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.3 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.5 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.5 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.8 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.8 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM52.00

[Metal Part] MG 1/100 MS-06J Zaku II Ver 2.0 Metal Enhancement Part Set

MG MS-06J Zaku II Ver 2.0 Enhance Metal Parts Set


It contain 10 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Backpack Thruster x 2
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg x 1
7. Aviation Hole 1.6 mm x 15
8. Aviation Hole 2.0 mm x 15
9. Metal Silver Bead Ball 1.5mm x 50
10. Flat Head Screw 2.0 mm x 30 


RM68.00
RM68.00 Request Stock
Quick View
img
SAVERM52.00

[Metal Part] MG 1/100 MS-07B-3 Gouf Custom Metal Enhancement Part Set

MG MS-07B-3 Gouf Custom Enhance Metal Parts Set


This package contain 9 different metal parts for MG 1/100 MS-07B-3 Gouf Custom

1. Gouf Metallic Red Eye Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Gatling Gun Muzzle for Gouf Custom x 6 
5. Gatling Gun Bullet Chain x 1
6. Backpack Thruster x 1 
7. Leg Thruster x 2
8. Flat Head Screw 2.0 mm x 30 
9. Aviation Hole 2.0 mm x 15

RM68.00
RM68.00 Request Stock

Showing 121 - 150 of 164 products