Brand : MOSHI\r\nModel : MS048\r\nMaterials : Metal holder, Tungsten carbide blades\r\nDimensions : 125mm Length\r\n\r\nVariations :\r\n0.15mm/engraved line knife\r\n0.2mm/engraved line knife\r\n0.4mm/engraved line knife\r\n0.6mm/engraved line knife\r\n0.8mm/engraved line knife\r\n1.0mm/engraved line knife\r\n2.0mm/push broach\r\n3.0mm/push broach\r\n\r\n?Description of goods?\r\nEngraved line knife/push broach :\r\n• Lightweight aluminum alloy and anti-slip pattern design handle.\r\n• Anti-roll cap.\r\n• The blades use by High-speed steel(HSS) and tungsten carbide 2.3, with hardness 60~63 sharp and durable.\r\n• Sizes will shown on the blades.\r\n\r\n?Usage?\r\n• Parts engraved line\r\n• Deepen engraved line\r\n• Details eradicate

Tool Mr Hobby Mr Masking Clay M134 

DSPIAE AT-PL Aluminum Penal Line Pen Non-overflow Wipe with 1 Pen Nib for Model Tool

The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.

• Mini size for the painting clip base: 31cm x 20.5cm, easy to take out and save space.
• Excellent quality: with strong corrugated paper, reusable and easy to insert on the base.
• Color clip: the clip and the stick can be separated.
• Convenient for storage: don\'t let your model pieces to leave every where,you can storage them through this set.

• Metal Aligator Clips with metal sticks for Spray works 
• Metal Aligator Clips comes with black colour glove around.
  
• useful when you need an extra hand to hold the plastic model parts for spray.
• 20 units in 1 set with affordable price; hurry to purchase while stock lasts.

Skull Color METALLIC Color 60 ml 

Mr Hobby Aqueous Surfacer 1000 Gray - B611 / White - B612 / Black - B613 / 500 White - B614

????Brand: Mr Hobby

????Variation:

- Mr Hobby Aqueous Surfacer 1000 Gray HSF01

- Mr Hobby Aqueous Surfacer 1000 White HSF02

- Mr Hobby Aqueous Surfacer 1000 Black HSF03

- Mr Hobby Aqueous Surfacer 500 White HSF04

Additional Information

????Mr. Surfacer is an internationally famous brand name for reducing the presence of small scratches and leveling a surface in preparation for painting

????It also acts as a primer allowing for better paint adhesion and provides a fine neutral color to eliminate the effects of the original subject\'s coloring affecting the paint\'s hue

????Comes in different particle sizes (higher the number, the finer the particles)

????Aqueous version is water based with a less chemical scent compared to regular Mr. Surfacer.

????Mr. Aqueous Surfacer 1000 Finer than the 500 series fills minor imperfections

Mr Hobby Aqueous Surfacer 1000 Gray - B611 / White - B612 / Black - B613 / 500 White - B614

????Brand: Mr Hobby

????Variation:

- Mr Hobby Aqueous Surfacer 1000 Gray HSF01

- Mr Hobby Aqueous Surfacer 1000 White HSF02

- Mr Hobby Aqueous Surfacer 1000 Black HSF03

- Mr Hobby Aqueous Surfacer 500 White HSF04

Additional Information

????Mr. Surfacer is an internationally famous brand name for reducing the presence of small scratches and leveling a surface in preparation for painting

????It also acts as a primer allowing for better paint adhesion and provides a fine neutral color to eliminate the effects of the original subject\'s coloring affecting the paint\'s hue

????Comes in different particle sizes (higher the number, the finer the particles)

????Aqueous version is water based with a less chemical scent compared to regular Mr. Surfacer.

????Mr. Aqueous Surfacer 1000 Finer than the 500 series fills minor imperfections

Skull Color ROBOT Color 60 ml 

Skull Color ROBOT Color 60 ml 

Mo Shi Glue Cement Stand Plate for Tamiya MS 032

• The pen tip is 3.0mm.
• This glue pen can be used to strengthen the joint parts, to avoid it becomes loosen and fall apart easily.
• It can be used to glue etching metal parts too.
• Easy and convenient
• How To Use
  1. Apply the glue over the joint parts.
  2. Wait for 1-2 minutes for the glue to dry up and turn transparent.
  3. Once the glue is dried up, fits the parts with the model kit.

MS-056 Mini Handsaw (with two saw blades)

The finished state of adhered parts becomes transparent, so this glue is optimum for gluing clear parts in plastic models. It can be used for handicraft or carpentry because it can adhere to cloth, leather or wood. Fixing time is approx. 5min., time until work can be done on the piece is approx. 60min. and within approx. 24 hours it will harden completely. When excess is exuded, it can be removed with lacquer thinner or nail polish remover if not yet hardened.

Mr Hobby Mr Spare Bottle (18ml)

Hardening time is extremely short, so it’s best for immediate hardening.
Hardening speed is 4 times faster than that of MJ194 Just One Push.
It comes in a new bottle, which can be opened without using a pin.
(It cannot be used as a container for Just One Push.)

Instant adhesive with excellent shock resistance, most suitable for metal parts.
It is very effective when used for etching.

Quick-drying adhesive in a bottle. Use the brush to precisely apply points and lines. 

Brand: Mr. Hobby
Item Code: XHUG01-XHUG13
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Blue XHUG01
2. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial White XHUG02
3. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Gray XHUG03
4. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Pink XHUG04
5. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Gray XHUG05
6. Mr Hobby Aqueous Hobby Color Gundam Witch ChuChu\'s Demi Trainer Yellow XHUG06
7. Mr Hobby Aqueous Hobby Color Gundam Witch Darilbalde Red XHUG07
8. Mr Hobby Aqueous Hobby Color Gundam Witch Pharact Gray XHUG08
9. Mr Hobby Aqueous Hobby Color Gundam Witch Michaelis Purple XHUG09
10. Mr Hobby Aqueous Hobby Color Gundam Witch Beguir-Pente Violet XHUG10
11. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith UR Green XHUG11
12. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Thorn Brown XHUG12
13. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Rebuild Blue XHUG13

Brand: Mr. Hobby
Item Code: XHUG01-XHUG13
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Blue XHUG01
2. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial White XHUG02
3. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Gray XHUG03
4. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Pink XHUG04
5. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Gray XHUG05
6. Mr Hobby Aqueous Hobby Color Gundam Witch ChuChu\'s Demi Trainer Yellow XHUG06
7. Mr Hobby Aqueous Hobby Color Gundam Witch Darilbalde Red XHUG07
8. Mr Hobby Aqueous Hobby Color Gundam Witch Pharact Gray XHUG08
9. Mr Hobby Aqueous Hobby Color Gundam Witch Michaelis Purple XHUG09
10. Mr Hobby Aqueous Hobby Color Gundam Witch Beguir-Pente Violet XHUG10
11. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith UR Green XHUG11
12. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Thorn Brown XHUG12
13. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Rebuild Blue XHUG13

Brand: Mr. Hobby
Item Code: XHUG01-XHUG13
Volume: 10ml
Type: Semi Gloss

1. Aqueous Hobby Color paint can be diluted with water if desired, while paint brushes can be cleaned and washed out in water. 
2. Yet, we recommend to use dedicated thinner in order to retain 100% of the original paint performance.
3. The solvent contained in Aqueous Hobby Color paint is very mild.
4. It provides a glossy texture and very good levelling qualities (ie the smoothness of coated film of paint), resulting in a very good level of painted finish. 
5. Gloss levels obtained using gloss coat Aqueous Hobby Colors can be adjusted by using H-40 Flat Base - mix approximately 5% of H-40 Flat Base to convert gloss colors to a matt finish, or 5 to 10% for a semi gloss finish.
6. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.
7. It is not necessary to dilute Aqueous Hobby Color for brush painting as a basic rule, but if using an airbrush to spray Aqueous Hobby Color, dilute the paint with 100 to 150% Mr.Aqueous Hobby Color Thinner (T-110 0r T-111).
8. When brush painting, generally 1 to 2 coats are recommended, and 2 to 3 coats when using an air brush.
9. If painting a light color over a darker base surface, more coats of paint may be required.

Variation

1. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Blue XHUG01
2. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial White XHUG02
3. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Gray XHUG03
4. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Pink XHUG04
5. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Gray XHUG05
6. Mr Hobby Aqueous Hobby Color Gundam Witch ChuChu\'s Demi Trainer Yellow XHUG06
7. Mr Hobby Aqueous Hobby Color Gundam Witch Darilbalde Red XHUG07
8. Mr Hobby Aqueous Hobby Color Gundam Witch Pharact Gray XHUG08
9. Mr Hobby Aqueous Hobby Color Gundam Witch Michaelis Purple XHUG09
10. Mr Hobby Aqueous Hobby Color Gundam Witch Beguir-Pente Violet XHUG10
11. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith UR Green XHUG11
12. Mr Hobby Aqueous Hobby Color Gundam Witch Lfrith Thorn Brown XHUG12
13. Mr Hobby Aqueous Hobby Color Gundam Witch Aerial Rebuild Blue XHUG13