Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

Sharp HG kit of the main machine from "Gundam SEED Destiny", the Force Impulse Gundam. A neat design that transfers well to a HG kit, with parts molded in colour and all featuring snap assembly (so no glue or paint are required); and to make it even more appealing, the Force Impulse Gundam is transformable when finished, breaking down into the Force Silhouette, Chest Flyer, Leg Flyer, and Core Splendour! Instructions for building the model and for transformation are included -- all in Japanese but clearly illustrated for ease in use.

Bandai's new HG version of the new flying mecha from Gundam Seed does a nice job on this very attractive design, without making you spend a fortune! Check the pose in the lower right photo below; yes, this machine's legs are really that flexible, even in this scale! And those finned jet units off the back are very cool, too. Have fun!

Accessories: Shigurubureido, needle gun × 2 (reproduced only molded knee).

•  Accessories: Beam Lariat × 2 (× 2 beams on each side), shoulder tackle beam (beam on each side) × 8, Knee kick the beam (beam on each side) × 6
  

- Mysterious Enemy [UE (Enemy Unknown). - To reproduce the variation of the dragon type. - Reproduce the entire body poses in a play at full capacity. - Clear parts spec chest beam cannon. - Accessories: beam saber, hand grip (left), flat hand (left) According to wikipedia: The Gafran is the mainstay transformable mass production MS used by the Vagan nation, and is characterized by its humanoid shape. The Gafran shows superior traits than the RGE-B790 Genoace in terms of offense, mobility and defense. Prior to the appearance of the AGE-1, it was thought to be invincible. There are color variations but it is unknown what they are supposed to distinguish. It possesses the ability to transform into an alternate "dragon-like" mode. A common feature of these machines are the waist-mounted movable stabilizer wings . It appears that when encountering something new, the Gafran can scan it using a red light. What this scan does is unknown. Vagan machines are installed with a self-destruct mechanism in order to prevent technology and information from getting into the hands of the Earth Federation military . By A.G. 164, this function is removed from most Vagan MS [5]. The majority of the Gafran's weapons are fixed, save for the handheld Colony Destroyer weapon. The majority of seen Gafran have been blue in color, however occasionally a more uniquely colored unit is seen that acts as a commander to the standard colored ones. It is unknown if these units are technologically different or if the only changes are aesthetics. Weapons - Beam Rifle: Serves as the Gafran's tail when transformed. Its beam rifle can be held over or under the right shoulder when in use, it is a powerful long-range weapon that can destroy a mobile suit with one shot. - Beam Vulcan/Beam Saber: Mounted on both hands. Fairly effective at damaging or destroying most human made creations, however, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. Its beam vulcan also possesses the ability to generate a beam saber. - Diffuse Beam Cannon: Mounted in torso. Generates a very wide beam ideal for eliminating difficult enemies that stand before the Gafran. However, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. - Colony Destroyer: Used by the Gafran during the assault on Space Colony Nora, the colony destroyer was a large scale weapon with power that can deal critical damage to a colony.[1] Generally, since Vagan Mobile Suits have internal weapons, this colony destroyer is thought to be an exceptional strategic weapon.[1] The Colony Destroyer is shoulder-fired by a single Gafran that directs the weapon towards the target colony. Gundam Age Series - Unknown Enemy gunpla review Gundam Age Series - Unknown Enemy gunpla review Video 2 Gundam Age Series - Unknown Enemy gunpla review Video 3 Gundam Age Series - Unknown Enemy gunpla review Video 4

- MS-volume of the Earth Federation Army. - Clear plastic canopy specification reproduces the internal mechanical details. - Reproduce the entire body poses in a play at full capacity. - Visit each armed gimmick. - Comes with a variety of weapons! - Accessories: Beam Spray Gun, Heat sticks, hand grip with arms (left), flat hand (left hand only)

From Gundam Seed, the impressive and dark "Raider Gundam" in 1/144 scale is able to transform from Mobile Suit mode to Mobile armor mode, when completed. Fantastic design allows for high flexilibity and posing of the completed Gundam. Molded entirely in colored plastic and featuring snap-fit assembly, this is a fantastic new entry into the Seed lineup!

An excellent High Grade kit of the Chaos Gundam, from Gundam SEED Destiny. All parts are molded in colour with terrific detail; all parts snap together, for easy assembly. Polycaps for the joints allow flexibility and lots of great poses. When completed, the Chaos Gundam can transform to Mobile Armour Mode. Paint is not necessary but would definitely improve the look of the finished model.

From the incredibly popular newest entry into the Gundam universe, Gundam Seed, comes a High Grade version of the Forbidden Gundam. Molded expertly in colored plastic, featuring Bandai's innovated multi-gate technology (which allows multiple colors to be shot on a single runner), it's extremely well-detailed as is typical of HG kits. Joints are movable via polycaps. The backpack can be pulled up after completion and used as shielding, just as in the series. Stickers are included for details. Though it's molded in color, paint would definitely enhance the appearance of the completed kit.

Fantastic high-grade injection-plastic kit of the Saviour Gundam in 1/144 scale. Beautifully-molded all in colour; this coupled with snap-fit assembly means no paint or glue are required. Polycaps make the joints movable; and the completed model can transform into Mobile Armour mode. Foil stickers for detail are also included.

Andrew Waldfeld's customised Gaia Gundam can transform, when completed, between Mobile Suits mode and Mobile Armour mode. Parts are molded in colour and snap together; foil and clear stickers are included for detailed markings.

• Popular [Gundam UC] HGUC machine or higher than the strongest Jegan! 
  
• Provides a wide range of motion completely new mold! - Hand parts come with a variety of weapons! 
  
• Reproduce the moving frame of the base shield! (Replacement formula). 
  
• Comes with a seal of the `Team` Tri-Star, can be reproduced platoon! 
  
• Camera head is clear and reproducible. 
  
• Set up as a removable saber reproduction. 
  
• Removable covers grenades waist. 
  
• Accessories: saber x 2, shield, beam rifle grip only + For Saber wrist (left), fist (left), flat hand (left)
  

HGUC MSZ-010 ZZ Gundam Expo Version

• Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release.
  
• This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show!
  
• Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly.
  
• Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.
  

Over a decade since the first MG Zaku II kit release and several MG Zaku II variations later, this Zeon MS finally gets the "Ver. 2.0" treatment with a completely revamped inner frame construction that allows for even greater range of articulation and realistic movements--you can even pose it kneeling on one leg as seen in the show! Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. Weapons include a Zaku machine gun, Zaku bazooka, heat hawk, and a pair of three-tube missile pods. Two types of blade antennas are thoughtfully included if you plan on building a Zaku II commander mass production type MS, plus two 1/100-scale pilot figures are also provided to man the MS. An incredible kit that's not to be missed!

• Best weapon can reproduce the cross-Sand Rock Crusher! - Combine the two bright show heat can also be a single weapon. Tell a cross-section shows Heat Crusher is left open to work. - Included beam machine gun! 
  
• Movable beam machine gun in stock and grip, can be transformed into storage forms.
  
• Accessories: shield, Huixiang x 2 Heat a large beam machine gun 
  

- Accessories: Heavy cannon, laser machine gun with grenade launcher, missile launcher, Pineapple ball x 2, command knife, Vulcan pod, target scopes, gun case. 

• It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  
• At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
• Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
• Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
• The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
• Accessory: Beam Rifle, Beam Sword x4

• New parts came with attachments! Action-based anime TV broadcasting time was unreleased. 
  
• Added design marking stickers, and military aircraft identification marks and numbers. 
  
• Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement.
  

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com

• Awesome HG kit of the all-powerful and intimidating Gundam GP02A as appeared in the MS Gundam 0083 Stardust Memory OVA. 
• It's a simple snap-fit plastic kit of GP02A that comes with all of its weapons used in the OVA including the giant bazooka and a super thick shield. 
• Included in this kit is a Display Stand that can hold GP02A as if it's floating in space. 
• The display base also allows for another stand attachment where GP01 (sold separately) can be attached for a beam saber fight display with GP02A as seen in the OVA series.
  

Reissue Date : Jun 2020Estimate Delivery : July 2020
This is an expansion set! MG 1/100 Victory 2 Gundam Ver. Ka sold separately!

---

Expansion parts for reproducing Victory Two Assault Buster Gundam Ver.Ka by jointing with the MS body (sold separately) available in retail stores is released !

---

* MS body is not included with this product.

* Includes the set of weapon parts for reproducing Victory Two Assault Buster Gundam Ver.Ka. -?Additional weapons are reproduced as detachable parts.

-?Victory Two Assault Gundam and Victory Two Buster Gundam can be reproduced by parts reassembly.

* Updated Parts for the MS body included

- Includes updated parts of the newly structured internal frame and parts of exteriors to hold the heavy armaments.

* Reproduced in color moldings in accordance with the MS body available in retail stores.

- The gold parts are made in gold color moldings.

* Includes newly designed "Ver.Ka" markings for reproducing Victory Two Assault Buster Gundam.

-- Set details --

Assault Parts set / Buster Parts set / Updated Parts for main body / "Ver.Ka" Water decal

------------------------------------------------------------------------------------------------------------------

This product is a set of parts for reproducing "Victory Two Assault Buster Gundam" by attaching it?

to MG 1/100 Victory Two Gundam Ver. Ka" (sold separately; available in retail stores).

* MS body is not included with this product.

* To reproduce the suit in the photographs, a "MG 1/100 Victory Two Gundam Ver. Ka"(sold separately) before assembly,?along with this product, are required.

The very-popular Qubeley is now available in the Mk-II style, which is basically just a color variation from the original release. You also get that cool Neo Zeon mark on the shoulder. Molded in color, snap assembly. Poly-caps for the joints.Technology & Combat CharacteristicsIn terms of technology and performance the two Qubeley Mk-II units were virtually identical to the original Qubeley. The Qubeley Mk-II's stored an additional two remote funnel weapons in the tail binder over its predecessor, giving the mobile suit a total of twelve remote weapons. The one noticeable difference between the two identical Qubeley Mk-II's is the different color schemes. The first AMX-004-2 Qubeley Mk-II which featured a dark purple color scheme and a hilted beam saber. The second unit, AMX-004-3 Qubeley Mk-II, was largely identical to the first, but instead had a red-and-yellow paint scheme. Of course since the Qubeley Mk-II mobile suits were designed for Newtype pilots they were outfitted with the same miniaturized psycommu system of the first Qubeley so that the pilots may control the remote weapons with their Newtype abilities. One major differences between the two mobile suits psycommu systems, was that AMX-004-3 Qubeley Mk-II would have a new version of the psycommu system installed that would allow its pilot, through the use of a psycowave amplifying headset, to remote-control the mobile suit from outside the cockpit. The head parts of the Qubeley MK-II features a psywave sender/reciever, and also features a system that gives feedback to the pilot, a system never seen in other Newtype use MSs. The head is also crafted to act as a stabilizer in flight, thus the odd shape. The shoulder armor of the Qubely MK-II features 12 thrusters to give it exceptional mobility and speed. The binders also act as shields. They also help the Qubeley MK-II'S AMBAC system. The fingers of the MK-II also mount the same psywave sender/reciever system as the head, and can directly give the funnels instructions. The legs of the MK-II are used as landing gear and for walking. They feature thrusters as standard equipment that allow the MK-II to maneuver in space and in the atmosphere.Sources:wikipedia