- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• 4th Platoon immortal] Jim Cannon II on the HGUC sortie! 
  
• Completely reproduce a serious, dignified form. 
  
• Camera head is clear and reproducible. 
  
• Beam Cannon is moving 90 degrees. 
  
• Reproduce the sword saber storage. 
  
• Various hand parts are included. 
  

Another one of the Innovators' superior Mobile Suits gets the HG plastic kit treatment, this time featuring Bring Stabity's melee-type Garazzo! This sharp snap-fit kit comes molded in color and features polycapped joints for striking action poses. It comes equipped with its signature pair of GN Beam Claws, and the shield part on its left shoulder armor can slide out to display it with GN Field activated. Garazzo's backpack houses the cockpit and its GN Drive, and can be detached from the Mobile Suit as an escape pod. A sheet of foil stickers and a display stand are provided. Accessories: 2 and 2 and 2 and special stand × flat part of the hand × 1 grasp person × beam saber Technology and Combat Characteristics Garazzo is designed to be a melee-type MS, possessing superior mobility, strength, and speed; capabilities that exceed those of A-Laws' GN-X MS units and highly formidable against Celestial Being's Gundams; Garazzo possesses enough physical power to subdue a Gundam. Garazzo has a similar appearance to Gadessa, retaining much of the frame and weapons such as the GN Cutters and GN Vulcans while having spikes to the head, shoulders, knuckles, and a large shield built onto its left shoulder. Its shoulder-shield can slide open to generate a GN Field, capable of deflecting and shielding against Celestial Being's beam weaponry. Its armament includes beam claws, stored inside the fingers of its hands, which can be combined into two beam sabers; these beam sabers have enough power to slice through 00 Gundam's GN Sword IIs. For long distance missions, Garazzo has a optional GN Booster that can connect to its legs and increase its speed. Garazzo also has an improved version of the GN Drive Tau that can rival the performance of a Third Generation Gundam's original GN Drive. There is a Gundam face hidden behind its face. Near the end of the war against Celestial Being, Garazzo was even equipped with its own Trans-Am System, of which its design was copied from Celestial Being via espionage. Source:wikipedia Reviews by Versus Z

Not just any custom-colored Mobile Suit of the Human Reform League's Tieren model, this hot pink Tieren Taozi is customized for the use of super-soldier Soma Peries! A highly capable machine that manages to battle on par with Celestial Being's Mobile Suits, the Tieren Taozi has a weapons loadout that includes a 200mm x 25 caliber smoothbore gun (space type), carbon blade, and a 30mm machine gun. Fully articulated upon completion with the use of polycap joints, this kit has other movable parts including its mono-eye and the flexible shields on each shoulder. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

• MS appeared in the person to be judged Mobile Suit Gundam Gaiden] Sega Saturn
  
• Commercialized in HGUC series [Blue Destiny Unit 2].
  
• Groin axis movable to reproduce the rifle poised by Standing knee.
  
• In addition to the normal moving around, the shaft shoulder is also reproduced on the mobile, can reproduce the scene more realistic shooting.
  
• Sort deployed in parts with the same storage unit on the outside of the shin saber reproduce the internal mechanism.
  
• Marking included.
  

MSM-04 Acguy

Mobile Suit Gundam UC] Kshatriya joined the SD series. A cute chibi version of the Kshatriya from "Gundam Unicorn" that comes with alternate beam sabers, real sub-arms in its binders, and a SD Lotto can switch between tank and mobile suit form!

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

Raww Le Klueze (we prefer to think of him as Char, Junior), pilots the impressive Providence Gundam. This 1/100 scale kit of the Providence Gundam is just as impressive, with fantastic detail and lots of spiky things (the Dragoon System), as well as Beam Sabres and a Beam Rifle for weaponry. Molded in colour and featuring snap-fit assembly, so no glue or paint are required; polycaps for the joints assure that it's posable when finished. A little 1/20 unpainted PVC figure of Char I mean Raww is included as well.

• Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining!
  
• Includes a huge part Shainingufinga effects. God Gundam can be installed into.
  
• Fingasodo also included.
  
• Supermode can be reproduced with the deployment of replacement parts of the head!
  
• Koaranda removable.
  
• Accessories: hand grip for the left saber hand grip, left Shainingufinga, Bimusodo core length, Short Sword core beam, sword, finger シャイニングフィンガーエフェクトパーツ
  

- Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining! - Favorite horse [restart Fuuun] together make your emergency. - Reproduce the mantle retracted during deployment. Work which can be replicated in the play peek hand from the cloak. - The base of the cross is a master / sculpture unbeaten 144 east. By adjusting the cut position Can be held in Masutagandamu. - Includes: Cape (Osamu Osamu expanded range), cross-hand grip + master effects, amazing fist heaven Ishiba, left Hirate, Dakunesufinga left, right and left wrist postures

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

-A heavy-duty mobile suit that boasts overwhelming firepower is now available in GUNDAM UNIVERSE!

-Participated in the 4th Gundam Heavy Arms from [Mobile Suit Gundam Wing]. A playful product specification that reproduces the main weapons such as large volume beam gatling and armed deployment of various parts of the body.

-Armed parts of the body are deployed. You can reproduce the shooting scene.
-Massive proportions like GUNDAM UNIVERSE.
--Swiss Army knife can be deployed.
-Beam Gatling can be held by both hands with a foregrip.
--Beam Gatling can also be mounted on the back.

[set content]
? Main body
? Replacement wrist left and right
? Swiss army knife
? Beam Gatling
? Soul stage joint

• Bandai's Master Grade (MG) "RX-78-3" is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980 (the original kit is still available, by the way. 700 yen). 
  
•  Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. Panels on the legs flip open to reveal internal mechanisms. The head has a panel, too. 
  
• Even the "Core Fighter" cockpit ship can be removed from its belly. Fine mesh parts cover the inside of the chest air intakes for added realism. Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit. All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• The RX-78-3 kit is identical to the RX-78-2 except that it is molded in blue and gray plastic, rather than the more "festive" colors of the original.
  

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

Sharp HG kit of the main machine from "Gundam SEED Destiny", the Force Impulse Gundam. A neat design that transfers well to a HG kit, with parts molded in colour and all featuring snap assembly (so no glue or paint are required); and to make it even more appealing, the Force Impulse Gundam is transformable when finished, breaking down into the Force Silhouette, Chest Flyer, Leg Flyer, and Core Splendour! Instructions for building the model and for transformation are included -- all in Japanese but clearly illustrated for ease in use.

Bandai's new HG version of the new flying mecha from Gundam Seed does a nice job on this very attractive design, without making you spend a fortune! Check the pose in the lower right photo below; yes, this machine's legs are really that flexible, even in this scale! And those finned jet units off the back are very cool, too. Have fun!

Accessories: Shigurubureido, needle gun × 2 (reproduced only molded knee).

•  Accessories: Beam Lariat × 2 (× 2 beams on each side), shoulder tackle beam (beam on each side) × 8, Knee kick the beam (beam on each side) × 6
  

- Mysterious Enemy [UE (Enemy Unknown). - To reproduce the variation of the dragon type. - Reproduce the entire body poses in a play at full capacity. - Clear parts spec chest beam cannon. - Accessories: beam saber, hand grip (left), flat hand (left) According to wikipedia: The Gafran is the mainstay transformable mass production MS used by the Vagan nation, and is characterized by its humanoid shape. The Gafran shows superior traits than the RGE-B790 Genoace in terms of offense, mobility and defense. Prior to the appearance of the AGE-1, it was thought to be invincible. There are color variations but it is unknown what they are supposed to distinguish. It possesses the ability to transform into an alternate "dragon-like" mode. A common feature of these machines are the waist-mounted movable stabilizer wings . It appears that when encountering something new, the Gafran can scan it using a red light. What this scan does is unknown. Vagan machines are installed with a self-destruct mechanism in order to prevent technology and information from getting into the hands of the Earth Federation military . By A.G. 164, this function is removed from most Vagan MS [5]. The majority of the Gafran's weapons are fixed, save for the handheld Colony Destroyer weapon. The majority of seen Gafran have been blue in color, however occasionally a more uniquely colored unit is seen that acts as a commander to the standard colored ones. It is unknown if these units are technologically different or if the only changes are aesthetics. Weapons - Beam Rifle: Serves as the Gafran's tail when transformed. Its beam rifle can be held over or under the right shoulder when in use, it is a powerful long-range weapon that can destroy a mobile suit with one shot. - Beam Vulcan/Beam Saber: Mounted on both hands. Fairly effective at damaging or destroying most human made creations, however, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. Its beam vulcan also possesses the ability to generate a beam saber. - Diffuse Beam Cannon: Mounted in torso. Generates a very wide beam ideal for eliminating difficult enemies that stand before the Gafran. However, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. - Colony Destroyer: Used by the Gafran during the assault on Space Colony Nora, the colony destroyer was a large scale weapon with power that can deal critical damage to a colony.[1] Generally, since Vagan Mobile Suits have internal weapons, this colony destroyer is thought to be an exceptional strategic weapon.[1] The Colony Destroyer is shoulder-fired by a single Gafran that directs the weapon towards the target colony. Gundam Age Series - Unknown Enemy gunpla review Gundam Age Series - Unknown Enemy gunpla review Video 2 Gundam Age Series - Unknown Enemy gunpla review Video 3 Gundam Age Series - Unknown Enemy gunpla review Video 4

- MS-volume of the Earth Federation Army. - Clear plastic canopy specification reproduces the internal mechanical details. - Reproduce the entire body poses in a play at full capacity. - Visit each armed gimmick. - Comes with a variety of weapons! - Accessories: Beam Spray Gun, Heat sticks, hand grip with arms (left), flat hand (left hand only)

From Gundam Seed, the impressive and dark "Raider Gundam" in 1/144 scale is able to transform from Mobile Suit mode to Mobile armor mode, when completed. Fantastic design allows for high flexilibity and posing of the completed Gundam. Molded entirely in colored plastic and featuring snap-fit assembly, this is a fantastic new entry into the Seed lineup!

An excellent High Grade kit of the Chaos Gundam, from Gundam SEED Destiny. All parts are molded in colour with terrific detail; all parts snap together, for easy assembly. Polycaps for the joints allow flexibility and lots of great poses. When completed, the Chaos Gundam can transform to Mobile Armour Mode. Paint is not necessary but would definitely improve the look of the finished model.

From the incredibly popular newest entry into the Gundam universe, Gundam Seed, comes a High Grade version of the Forbidden Gundam. Molded expertly in colored plastic, featuring Bandai's innovated multi-gate technology (which allows multiple colors to be shot on a single runner), it's extremely well-detailed as is typical of HG kits. Joints are movable via polycaps. The backpack can be pulled up after completion and used as shielding, just as in the series. Stickers are included for details. Though it's molded in color, paint would definitely enhance the appearance of the completed kit.