Here's a great new High Grade kit offering: a sharply detailed Tieren Space Type variant Mobile Suit! Molded in color, the blue Mobile Suit is armed with a 200mm x 25 calibur Smooth-Bore gun (space type) that can be mounted on either of its forearms, a 30mm machine gun on the left of its chest, and special equipment attachments that include a carbon wire launcher with bendable carbon wire, carbon net launcher, and gel launcher. Fully articulated with polycap joints, this kit has other movable parts including its mono-eye and nine flexible verniers. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

After using his personal custom UT-1D Civilian Astray DSSD Custom to battle Serpent Tail, Earth Alliance, and the guerrillas in the Republic of East Asia. Leons Graves decides to upgrade his Civilian Astray DSSD Custom into the PMC-1L Arms Astray PMC Custom. It first appeared in chapter 9, Xist piloting his CGUE Assault, Lukas piloting his Strike E IWSP, and Socius piloting his Hyperion G Unit 1 heads towards the ZAFT base for a cease fire and call for a truce. On there way Leons in his Arms Astray PMC Custom confronts Lukas. Lukas fires at Leons, but Socius protects him because he was a Natural. Leons then battles Lukas and damages his Strike E IWSP. source: http://gundam.wikia.com

RX-79(G) Gundam Ground Type.  

RX-78-2 Gundam Ver.G 30th

• High grade GN-001 Gundam Exia
• Comes with installation manuals
• Scale: 1/144
• snap and fit that does not require any glue.
• Detail wikipedia of GN-001 Gundam Exia can be found here.

- On its own, it comes with V Core Booster and Core Fighter, Display Base, plus weapons for V Gundam too! - By combining it with the V Gundam already released, you can create the V-Dash Gundam. - The display base included is for V Core Booster. Accessories: Beam Rifle, Beam Smart Gun, Beam Javelin, Overhung Cannon, Gatling Gun, Rocket Launcher left/right, Disposable Buzz x2, display stand

GNY-001F Gundam Astrea Type-F History of GNY-001F Gundam Astrea Type-F: The story is that as HRL’s battleship has gotten closer to CB’s Colony Krung Thep, 874 is gathering intelligence using the Sadalsuud, Ruido comes out in the Astrea to intercept. The instruction that came from Veda was “Defeat”. Here, Ruido in the Gundam starts attacking the person. Later on, the second generation Gundam Meister arrived in a transport aircraft on a battlefield. Four HRL MS “Phantom”s against the Gundam Meister 874’s Gundam Astraea fight a one-sided battle that ends in 36 seconds. Ruido in Astraea shoots down the first Helion Platoon that was examining AEU’s Orbital Elevator. In addition, 874 who intercepts in Sadalsuud, who sees the shadow of an approaching aircraft, proposes that Ruido does a check.Ruido sorties in the Astraea in place of the injured Marlene. Ruido does not want Marlene to go out into the battlefield. If he was fighting very well, then there’s no need for her to go out into the battlefield. Ruido exterminates the Helion force through Astraea. Source: http://gundam.wikia.com

- Gouf masterpiece series [Gouf] appeared in the HGUC series!

- The biggest feature is the extensive armament Gouf 1 / 144 scale is also included!

- Hitoroddo ... Hitoroddo reproduce the lead, after the tip deployment comes before deployment.
Three twin 35mm Gatling gun · 75mm Gatling gun

- Hitosaberu

- Shield reproduce complex split!
* The shield can be removable from the twin 3 35mm Gatling gun.

- Hitosaberu is removable to allow Gatoringushirudo.
· 75mm Gatling gun and shield sets reproduce the splitting of the street.

- Comes with plenty hand parts
In addition to the grip of a fist, fist expressive (left) and palm (right) is included.

- Pipe materials used soft power of the waist belt fed ammunition is both easy to assemble and reproduce complex shapes using a soft material.
After mono eye - can be assembled by moving parts division.

- Accessories: Hitoroddo, Hitosaberu, shielded, 75mm Gatling gun,
3 35mm twin Gatling gun, for the fist grip (left), fist (right), palm (right)

MS-14S Gelgoog Char Custom Ver.2.0

- Official Gaiden MS, commercialization decisions Gandamuasutorea! - Official Gaiden Asutorea 00P appeared to reproduce the HG series. - Asutorea] come with basic equipment. - The backpack is also possible to assemble the cone-shaped selection formula. - Accessories: Proto GN Sword, GN Launcher, GN beam rifle, GN beam saber x— 2, Shield

• Here is the evolved MS of the official sub story MS, 1Gundam, taking off! - Scheduled for appearance in the official sub-story 00I. The evolution of 1Gundam, equipped with a new armory binder on the back, has been reproduced as the I's Gundam in HG. 
  
• You can choose to build it as 1Gundam itself. 
  
• The new weapon binder has been equipped with a gimmick to reproduce each weapon modes such as the Cannon mode.
  
• Includes the new weapon common to 1Gundam and 1.5Gundam, the large GN Sword and GN Beam Saber. 
  
• Large GN Rifle is included too, for a very rich weaponry content. 
  
• Accessories: GN Shield, Large GN Beam Rifle, GN Beam Saber x2 (Blade x1), Back Binder
  

- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required.

• The FA-78-3 Full Armor 7th Gundam first appeared as a part of Kunio Okawara's Missing Mobile Suit Variations (M-MSV). The Gundam was later redesigned and updated and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081.
  
• Product Weight : 297g
  

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

Inspired by Sun Shangxiang from the Chinese literary classic "Romance of the Three Kingdoms," Sonshoukou Gerbera is now a nicely detailed snap-fit plastic kit! She wields a naginata weapon, and the bow on her back can be detached for use as an actual bow weapon! Includes two types of paper cut-out aprons. Part of Bandai's "BB Senshi Sangokuden Senjin Kettou Hen" ("BB Warrior Romance Of The Three Kingdoms: Battle of the War Gods Chapter") line, this simple kit is molded in color and features polycap joints, detachable armor parts, and heel stamps with his name etched into both heels for you to stamp on anything you like when stamp dye (not included) is applied to the heels! Foil stickers are provided for detail so painting is not required, but would add a more realistic appearance to the final product. A full-color manga chapter drawn by PLEX Tatsuhiko Shimoda is also included (printed on the assembly instructions sheet). Although the assembly instructions are in Japanese, they are extremely well illustrated so anyone can follow them.

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

Rick Dom II Colony Collar

wikipedia:While Project V was underway, the Federation also began production of experimental units using spare parts originally intended for the RX-78 Gundam. Using these parts they built approximately twenty specialized ground combat-model christened the RX-79[G] Gundam Ground Type during the mid-part UC0079. Though in many ways similar to its RX-78-2 predecessor, the RX-79[G] was quite a bit different in other ways, particularly in its armament. The beam sabers were stored in the legs, as the backpack mounted an equipment rack to carry storage containers, parachute packs, or other field options. The head vulcan guns were removed, as the head now carried a periscope for underwater and trench warfare. Although sporting a smaller generator than the RX-78, the Ground Type Gundam still had the generator power to use a beam rifle, though it was often equipped with a standard 100mm machinegun or a heavy 180mm cannon. A single vulcan gun and a multiple-use "multi-launcher" mounted in the torso's left breast rounded out the new armament. In order to make use of space, two extra ammunition packs for the machinegun were placed on the sideskirt armor. As the RX-79[G] was built out of spare parts from Project V, replacements parts were very limited. Luckily the RGM-79[G] shared 80% of the same parts as the Gundam, making field repairs easier but sometimes resulted in a few customized mobile suits. Source:http://gundam.wikia.com

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

accessories: GN Rifle x 1, GN Shield x 1, Beam Saber x 2

P-Bandai: HGUC 1/144 GM Kai + Ball Repair Set

GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

Sharing the same mold as the 2007 1/100-scale Gundam Exia, this kit of Setsuna's Mobile Suit comes molded in glossy colors for you to build the mech in Trans-Am mode. The sharply detailed kit can take on a wide range of poses upon completion, thanks to the use of polycaps in its joints. It comes fully equipped with its signature weaponry, including a GN sword that can switch to GN sword rifle mode, and foldable shoulder antennas. Not a drop of glue or paint is required! A sheet of hologram foil stickers is included. Combat Characteristics Designated as a 3rd-generation Gundam, the Gundam Exia is built with close combat as its major strength. The unit is the successor to its second generation predecessor, GNY-001 Gundam Astraea; much of Exia's design was heavily influenced from Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems. Exia was created as a high-mobility unit to greatly supplement its close combat role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control (AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1] The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration. Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1] When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater mobility is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack. The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet. In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat. Source:wikipedia