• Accessories: beam rifle, shield, beam saber, beam saber (small), Fin funnel x 6 
  
• Item Size : 39 x 31 x 12 cm / 1163g

According to wikipedia

The RX-93 ? Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was piloted by Amuro Ray.

The ? Gundam was one of the most advanced mobile suits of its time in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, designed and used by Amuro Ray himself during the Second Neo Zeon War. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average value of specifications of each successive generations of Gundam-type units from the the original Gundam to the ?? Gundam, and updated with state-of-the-art technologies introduced at the time.

The ? Gundam's design also focuses on versatility and operational aspects as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycoframe, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.

Although its development was only partially completed at the time of its deployment, the ? Gundam proved itself to be a formidable mobile suit. The operating data obtained from the Silver Bullet (Funnel Test Type) was used in its development. It is the first Gundam-type machine to be equipped with Funnels. A newly developed MS control program is installed to account for the ? Gundam's center of mass during the separation and movement of the Funnel equipment.

Incorporating the Psycoframe technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ? Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a suitable Newtype pilot. When combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art mobile suit was able to almost single-handedly hold the whole Neo Zeon force by just itself, and its Psycoframe was put to the test to determine the history of humanity living on earth.

Following Amuro's failure to stop Char in attempting to drop Fifth Luna, Amuro decided to design a mobile suit that would be able to combat Char's MSN-04 Sazabi. This machine, the RX-93 Nu Gundam, was designed not only to be the true upgrade to the RX-78-2 Gundam, but also to be the ultimate Gundam. Unknown to Amuro, though, Char realized this would be the case and allowed Anaheim Electronics to pass on the psycho-frame technology for the Nu Gundam's use. However, testing of this machine would be interrupted when fighting between Londo Bell and Neo Zeon forces force Amuro and his girlfriend Chan Agi to take the half-completed Nu Gundam with them to save everyone.

Sadly, the lack of testing would easily been shown when, during one skirmish, Amuro's panicking caused his fin funnels to react, forcing Gyunei Guss to kill his captive, Kayra Su. As Londo Bell forces moved to stop Char from dropping Axis, Amuro and Char would go head to head, battling one another and practically ravaging their suits. In the end, another flaw revealed itself - the psycho-frame resonated with high emotions, pushing Amuro's already amazing Newtype powers to new heights, and managed to push Axis away from the Earth. The resonance creates a light that could be seen from Earth. The fate of both pilots however is unknown and remains a big mystery even to this day.

Weapons 

• Beam Rifle - A high-powered beam rifle with a normal output of 3.8MW. It can be recharged by e-caps and with a greater fire rate than most beam rifles.
  
  
• Beam Saber - The ? Gundam has a standard-issue beam saber stored on its left forearm, which can be drawn quickly to attack enemies in close range.
  
  
• Fin Funnels - A form of remote weapon unique to the ? Gundam. Despite their name, the fin funnels equipped on ? Gundam are in function "bits", since they have built-in generators rather than the E-caps used by funnels. While this made them much more expensive to construct, and allowed less modules to be equipping than the standard, this had the enormous benefit of giving the fin funnels a tremendously long operational time. Circling the battlefield on their own, the fin funnels could be utilized in far more creative and strategic ways than standard funnels. Model number: AEV/PFF93AR.The actual beam fired by the fin funnels was also more powerful, given that they are emitted by a generator instead of an E-cap. The fin funnels also had the ability to generate a unique beam shield, known as a "fin funnel barrier", to provide a defense against both beam weaponry and solid projectiles with lower outputs compared to the beam shield's power consumption. Although these unique funnels proved incredibly effective and flexible in purpose, they were also much larger than the standard funnel, making them easier targets to shoot down. With the help of the Psycoframe technology, Amuro can utilize its fin funnels more effectively by thoughts alone.
  
  
• v-Hyper Bazooka - 280mm bazooka that can be fired from its position on the backpack.
  
  
• Shield - Issued on the ? Gundam is a custom shield emblazoned with Amuro's emblem. It features a built-in beam cannon and missile launchers. Amuro uses it in many strategic ways, such as fooling enemies that he was shot down by leaving the shield and the v-Hyper Bazooka, and attacking enemies once they lower their guards.
  
  
• Large Beam Saber - Stored on the backpack, this beam saber presumably has a higher power rating than the saber stored on the left wrist and is used more often than the standard saber. The saber's pommel is capable of emitting a beam dagger on its end, but it is never seen used.
  
  
• Vulcan Guns - Two head mounted 90mm vulcan guns that have been seen to shred armor.
  
  
• Birdlime launchers - Fires an adhesive substance from the hands that can be used to repair small cracks in colony wall or to restrain soldiers on foot.
  
  
• Dummy Launchers - Stored in the hands the launchers can deploy mobile suit sized dummy balloons as a decoys.
  
  
• Psycoframe cockpit - The cockpit is composed of microscopic Psycommu receptors that allows the pilot to control the suit as if it is his/her own body.

• The most powerful of all the OZ Mobile Suits, the Tallgeese is presented here for the first time as a Master Grade kit! 
  
• Re-interpreted by master designer Hajime Katoki as displayed in Endless Waltz, the Tallgeese, a Suit numbering among the most powerful in the After Colony timeline is finally recreated as an Mg. Designed with a complex inner frame as befitting a Master Grade Suit, this model is also equipped with a set of original marking decals created my Mr. Katoki.
  
• POINT 01: Reproduction of Inner Frame
  
• Inner frame is completely recreated- the Leo-style internal cameras, chest ducts, and structure are precisely reproduced. 
  
• POINT 02: Deployment of back thrusters
  
• Backpack thrusters are jointed for maneuverability and can be opened or closed for a variety of poses.
  
• POINT 03: Deployment of lumbar thruster
  
• Rear skirt thrusters equipped with deployment gimmick to enhance the action potential of this kit.
  
• POINT 04: Dover Gun
  
• A first for a Gundam model, the Dober Gun is equipped with a blowback gimmick activated by pulling back the bolt.
  
• Accessories: Dober Gun, Shield, Beam Saber x2, 1/100 Zechs Marquise (Standing) 1/100 Zechs Marquise (Sitting), Fist (Left and Right), Open Palm (Left and Right), Weapon Grip (Left and Right)
  

• Adopting the latest format, both easy assembly and high mobility are realized. 
  
• Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  
• The range of mobility is greatly improved as well as the number of movable joints is increased. 
  
• Powerful poses seen in the anime can be recreated. 
  
• Parts are located on the runners under consideration to maximize "easy-assembly". 
  
• Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  
• The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  
• Both vertical and horizontal movement in the waist. 
  
• A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  
• Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  
• Runner x5, Foil sticker x1, Instruction manual x1
  

• The MS-14Jg Gelgoog Jäger (????J???????) is a variant of the standard MS-14A Gelgoog. It appeared in the Mobile Suit Gundam 0080: War in the Pocket series.
  
• An upgraded model of the Gelgoog under United Maintenance Plan, one of Zeon's attempts to simplify both construction and operation of their Mobile Suits. The MS-14Jg Gelgoog Jäger, or simply Gelgoog J, featured more powerful thrusters and additional verniers. To offset the increased propellant use, it also carried a pair of large external propellant tanks on the backpack. It was primarily armed with a large beam machine gun that boasted high accuracy (in fact, the Jäger was nicknamed the Gelgoog Sniper). Like other later model Zeon Mobile Suits, it was also capable of carrying other Zeon weaponry such as the powerful bazooka or MMP-80 machine-gun. With its high performance and powerful weaponry, it was more than a match for the Earth Federations GMs and other mass-production units.
  

• From "Mobile Suit Gundam SEED Destiny Astray", Red Frame appears as HG. 
  
• The new format, which is the same as Blue Frame (already on the market), is adopted. 
  
• The Flight Unit is detachable to reproduce a normal mode Red Frame. 
  
• Includes various kinds of weapons such as a gerbera straight, BuCUE head, shield and beam rifle. 
  
• The gerbera straight can be returned to the scabbard. 
  
• Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1