Gundam Avalanche Exia made its debut in the "Mobile Suit Gundam 00V" side story serialized in Hobby Japan magazine, and fans can now build the powerful mech with this sharp snap-fit model kit from Bandai! Molded in color and carefully detailed after mecha designer Kanetake Ebikawa's drawings, the Mobile Suit is equipped with its high-mobility hs-A01 Avalanche along with its Seven Sword System. Its armament includes a GN Sword capable of switching into rifle mode, two GN beam daggers, two GN beam sabers, a GN long blade, and a GN short blade. The mech features sharp mechanical detailing throughout, and will be fully articulated with polycap joints upon completion. Foil stickers and marking stickers are included. Weight: 650g

Featuring the fully articulated 1/100 Chaos Gundam and can transform just like the TV series! Not only can it transform but it also comes packed with loads of unique weapons and a booklet full of artwork of both the Gundam and the pilot Sting Oakley! The helmet crest can be folded down and retracted for the Mobile Armor mode. Highly recommended for any Gundam fan!

Justice is originally built by ZAFT and piloted by Athrun Zala. Its backpack, the "Sub-flight System," is actually a support vehicle that houses a set of cannons on top and can detach and fly on its own. Like the Freedom Gundam, it is equipped with a Neutron Jammer Canceler, allowing a nuclear reactor to be used for the powerplant instead of a mere battery. This means that the Justice Gundam can operate its Phase Shift system indefinitely.

• Following the Suit's original designs, the shoulder cape and large range of motion allow this kit to fit into accurate poses and feature dynamic action! 
  
• Huge weapons split into individual elements!
• Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1
  

• Runner x24, Foil sticker x2, Marking sticker x2, Tetronic sticker x2, Instruction manual x2 
  
• "V Dash Gundam" as a fully equipped V Gundam Ver.Ka is released. Includes additional equipments such as the "Core・Booster". 
  
• Includes two V Head Core Fighters and two Hexa Head Core Fighters. The Core Fighter, Top Fighter, Bottom Fighter, Core・Booster, all four flight mode can be made with a single package. 
  
• The Overhung Cannon of Core・Booster becomes a big beam cannon by being attached onto the MS back. 
  
• Includes two beam rifles which can be attached to the hard points. 
  
• The beam cannon which is attached to the side armor, the missile pod, the two disposable buzzes on both sides are included. 
  
• Includes the gatling gun, beam javelin, beam smart gun. 
  
• Includes colored parts for foot covers for reproducing V Gundam Hexa. 
  
• Includes special joint parts for the action base.
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
•  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
•  Equipped with a movable core fighter! 
  
•  Includes Stand to display the Core Fighter.
  
•  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
• Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
• Equipped with a movable core fighter! 
  
• Includes Stand to display the Core Fighter.
  
• Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

Beautiful Master Grade version of the God Gundam, in 'Hyper Mode'. The base is Bandai's super flexible, super poseable 'Action Frame', put together with some snap-fit pieces, some screws, bolts, polycaps for joints, and some wire (Master Grade kits are much more complex than regular plastic kits) over which the armor is layered. The finished product can take on infinite 'realistic' poses as seen in the anime. Parts are gold-plated for that Hyper Mode gleam! Some stickers for detail are included, as well as a plastic 'jewel' for the Hyper Mode unit. Also included is a translucent orange plastic figure of Domon Kyasshu!

A 1/100 scale model of the Gundam Astray Gold frame, rescued from Heliopolis just before its destruction. Entire frame is finished in gold chrome. Includes parts for replicating the one-armed version as seen in the comic. Includes beam rifle, shield, two beam sabers, and the Duel Bazooka used to escape from Heliopolis.

Manufacturer: Anaheim Electronics Company Operator: Neo Zeon Unit type: mass production general purpose mobile suit Dimensions: head height 20.0 meters Weight: empty 23.0 metric tons; max gross 50.8 metric tons Powerplant: Minovsky type ultracompact fusion reactor, output rated at 2160 kW Armament: beam sword-axe, recharge rack storage location unknown, hand-carried in use; shield, mounted on left forearm, mounts 4 x grenade launcher; beam machine gun, powered by replaceable e-pac, with attached heat bayonet, 2 spare e-pacs stored on hip armor; beam machine gun, powered by replaceable e-pac, 2 spare e-pacs stored on hip armor, with optional attached grenade launcher, 1 round; 4 x sturm faust, rocket-propelled warhead, stored in shield, hand-operated or can be launched from shield Pilot: Rezin Schnyder

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

• From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  
• With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  
• Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  
• Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  
• Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  
• Center chest and “eye” cameras light up using included LEDs (batteries required)
  
• Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 
  
• 
  
• Accessories: Accessories: Twin Buster Rifle, Beam Saber x2
  

• To commemorate the release of the "Gundam Unicorn" animated movie Bandai is releasing a newer, better, most glorious MG Unicorn called the Unicorn Gundam with Cage! 
  
•  This isn't just a new paint scheme; Bandai have totally redone this kit. New body color. Fully transformable. Head redesigned, including vulcans, to match the animated version. 
  
• Mobility of the hips is now 360 degrees & Knee joints have 150% more articulation! An additional antennae for destroy mode. 
  
• Customize cage included that can store extra parts while beam saber can be stored at the back of the base. Cage can be attached to the Action Base 1, all arms are movable. 1/100 figures: Audrey, Banagher, Cardeas, and Marida included! 
  
• Included weapons will be the Beam Magnum (with magazine), Hyper Bazooka, Shield, Beam Saber and select antennae.
  

• Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  
• Its distinguishing design of armor is finely re-created. 
  
• It can hold dynamic poses with its plentiful movable parts. 
  
• Gold and silver metallic color plating makes gorgeous impression. 
  
• Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  
• Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 
  

• An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  
• Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  
• Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  
• Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  
• Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.
  

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

* First Gundam from the new series - Gunpla Builders Beginning Gundam! * Plastic owned by a mysterious hero Hal. * Accessories: beam rifle, shield, beam saber saber hand books Weight: 301g

• Gundam Exia Normal Scale 1/60
• Comes with installation manual, stickers
• scale is larger then master grade but not so detail
• Snap and fits so glue is not needed.

• Total of 520pcs parts to create a robot . Can switch and transofrm between the massive G-Fortress flyer, the core base, core top and core fighter individual units, plus of course the actual ZZ Gundam itself. 
  
• Inner detail is not as good as some other MG releases, but given the nature of the ZZ, that's not surprising. 
  
• Fully posable hands are just part of the completely posable structure that lets you duplicate virtually any scene you can think of. 
  
• Weapon includeds two beam sabers, and a huge double cannon.
  

Amazing sturdiness! The only parts that will normally fall off when playing is merely either the hands or the side skirts! The MGs from the G Gundam are VERY playable. Long term durability. Sagging parts? Of course not. Shining Gundam, can last a lot of wear and tear thanks to the use of screws. Locking mechanism for some of the joints. Shining Finger!

-MMI-710 "Excalibur" anti-ship sword