• Home
  • Showing Gundam Model Kits product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits product(s)

Showing 1711 - 1740 of 2616 products

Quick View
img
SAVERM50.60

[020] NG 1/100 Nix Providence Gundam

- Appearing in the official Versus Gaiden Gundam SEED Astray
Commercialization of electronics Providence Gundam!
- Enhanced Mobile Suit Gundam based on Providence.
- Dragoon with the body of the aircraft systems are those that are joined with the rear,
Has been enhanced to all 12 machines.
- Providence Gundam's backpack electronics simultaneous release
Relay can be connected to the rear of Gen Duel Gundam.
- Providence Gundam is on the back of electronics
Hail can be connected Buster Gundam's backpack.

- Accessories: Backpack Dragoon type (type key with Judith lithium beam rifle) × 1,
Complex weapon systems shields × 1, × 1 system with Dragoon

RM99.20
RM99.20 Request Stock
Quick View
img
SAVERM88.40

HGUC 1/144 MS09 Triple Dom

This isn't just an optional build-one-of-three-Doms set -- this is a for-real honest-to-goodness three-in-one triple Dom set. You get to build Ortega's, Gaia's, and Mash's Doms, and you get a special base to display them on together, so that you can pose them in a "Jet Stream Attack" pose. How cool is that? Stickers are included for the markings, and plenty of weapons are included (including three Mega Bazookas). Three HG kits in one box

RM151.20
RM151.20 Request Stock
Quick View
img
SAVERM112.00

[Daban] 6616 MG 1/100 Buster Gundam

[Daban] 1/100 Buster Gundam (MG)

Manufacturer: DABAN

Scale: 1/100
Grade: Master Grade
Series: Mobile Suit Gundam SEED

Please note that this is Not Bandai Products

RM88.00
RM88.00 Request Stock
Quick View
img
SAVERM125.90

MG 1/100 Freedom Gundam Ver.2.0 & Figure-rise Bust Kira Yamato (Dramatic Combination)

- [Mobile Suit Gundam SEED] MG & figures rise bust of special set appeared to reproduce the world of!

- Dedicated display stand included for the special set!

- Package adopted a new illustrations drawn!
- A new instruction manual included!

- accessories
-   AMA-M01 Rakeruta-beam saber x 2
-   MA-M20 Alps beam rifle
Laminate anti-beam shield
- Grip hand (left and right)
- Open hand (left and right)
Weapon Possession (grip) (left and right)
Weapon Possession (gun) (right)
- Pedestal (for Kira Yamato)
Dedicated display pedestal (for MG Freedom Gundam Ver.2.0)

RM215.50
RM215.50 Request Stock
Quick View
img
SAVERM43.30

[LIMITED] HGUC 1/144 RX-0 Unicorn Gundam [Destroy Mode] + 1/48 Head Display Base

HGUC 1/144 [LIMITED] RX-0 Unicorn Gundam [Destroy Mode] + 1/48 Head Display Base.
  • The 1/48 Head Display Base can transform into the Destroy Mode and the Unicorn Modes easily and at the back there is a stand for 1/144 HGUC models.

RM94.50
RM94.50 Request Stock
Quick View
img
SAVERM20.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM270.00
RM270.00 Request Stock
Quick View
img
SAVERM30.00

P-Bandai Exclusive: HG 1/144 Gundam Astray Gold Frame Amatsu

P-Bandai Exclusive: HG 1/144 Gundam Astray Gold Frame Amatsu


RM120.00
RM120.00 Request Stock
Quick View
img
SAVERM4.50

FG 1/144 RX-78-2 Gundam

FG 1/144 RX-78-2 Gundam

Here's another of the same concept, Love how the modeler preserved the quality of this First Grade RX-78-2 Gundam model kit by painting its parts with original colors and left it on the runner. 

The presentation is also simple yet very nice and beautiful! wuld love to try this one with the older version.

***Runner is only in plain colour, displayed image is after painting***

RM13.50
RM13.50 Request Stock
Quick View
img
SAVERM10.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam

[Daban] PG 1/60 Phenex Gundam Unicorn

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM450.00
RM450.00 Request Stock
Quick View
img
SAVERM25.00

[Daban] 6642 MG 1/100 Phenex Gundam

[Daban] 6642 MG 1/100 Phenex Gundam
Series: Gundam
Grade: MG
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Product

RM135.00
RM135.00 Request Stock
Quick View
img
SAVERM31.80

[039] HGIBO 1/144 Gundam Astaroth Rinascimento

A new side story from the "Gundam IBO" series - "Gundam Iron Blooded Orphans: Steel Moon" - the Gundam Astaroth Rinascimento is making its appearance! Showing off the Astaroth's characteristic asymmetric design, the new Astaroth Rinascimento comes with a new large weapon called the "Bastard Chopper"! You can also combine the "Bastard Chopper" and "Demolition Knife" to make an even better, larger weapon! 

Accessories:
- Demolition  knife x? 1
- Rifle x? 1
- Knife x? 2
- Bastard Chopper x? 1

RM76.00
RM76.00 Request Stock
Quick View
img
SAVERM61.90

NG 1/100 MSJ-06II-A Tieren Ground Type

  • A kit in 1/100 scale to appeal the mechanical detail the type Tieren the ground.
  • Incorporating a new shield is movable up and down shoulder, a more robust representation of the MS. On the surface of the tank aircraft
  • Enforcement of texturing to the image.
  • Step and use the aircraft surface, the bottom of shoes.
  • Comes with a new bazooka. Sensor can be mounted at the bottom of the box. The image of the structure parameters weapon
  • By dividing ー star, directing further reality real weapon. Dedicated to the arm can be mounted in the joint.
  • For the foot takes the mold from real weapons, represent a mold in the ground type. Mono
  • Is reproduced in clear plastic. Under the clear plastic mold is adopted aware of the camera.
  • Movable joint of the arm is aware of the double joint, can be reproduced to smooth the stance of each weapon. Holding the weapon or
  • Comes with a certain facial expression are indispensable to posing palm.

RM105.80
RM105.80 Request Stock
Quick View
img
SAVERM14.70

P-Bandai Exclusive: HGIBO 1/144 Io Frame Shiden Custom [Riden-Go]

P-Bandai Exclusive: HG 1/144 Io Frame Shiden Custom [Riden-Go]
Estimate Arrival: October 2017

RM89.80
RM89.80 Request Stock
Quick View
img
SAVERM14.70

P-Bandai Exclusive: HGIBO 1/144 Io Frame Shiden Orga Custom

P-Bandai Exclusive: HG 1/144 Io Frame Shiden Orga Custom

Estimate Arrival : October 2017

RM89.80
RM89.80 Request Stock
Quick View
img
SAVERM44.90

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

Estimate Arrival : September 2017

RM274.10
RM274.10 Request Stock
Quick View
img
SAVERM27.90

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

Estimate Arrival: September 2017

RM170.10
RM170.10 Request Stock
Quick View
img
SAVERM103.80

RE/100 AMX-103 Hamma-Hamma

The mysterious silhouette at the Gundam Expo has now been revealed! The highly anticipated Hamma-Hamma is now part of the RE/100 series! From the original ZZ Gundam, Hamma-Hamma is sculpted with excellent details and proportions. The flexible arm has a large number of gimmicks including the utilization of soft materials and lead wiring to reproduce long-range attacks! Hamma-hamma's shield with mega-particle gun is accurately reproduced and has meticulous detailing, even in the underside. Set includes shield with mega-particle gun, two beam sabers, space eye, and arm display seat x4. Runner x19. Sticker sheet x1.

Accessories:
· Shield with mega particle gun x 1
· Beam · saber x 2
· Spacemain x 1
· Arm display pedestal x 4

RM165.80
RM165.80 Request Stock
Quick View
img
SAVERM50.70

[056] HGBF 1/144 Chinagguy

- The ending that appeared also in the ending appeared in HG finally!

- [Gundam Build Fighters] appeared in the ending, the subject became a topic [chinagai] finally gotplugged at HG.
It features a gimmick such that the original head of China can also be reproduced by removing the characteristic bearhead.

-Point 1-
Natural posing possible!
Chest and leg joints realize a wide range of motion using KPS material.
Various posing is possible.
Shoulder frills and apron use soft material.

-Point 2-
Attention face modeling!
Eye is a clear part style and seal type.
Glasses are a selection formula without lenses.

-Point 3-
Fulfilling play value
When decomposing the head part, the original head of China appears from inside.
Also packed with gimmicks that you can change hands by replacing forearms.
Bear ear version and regular version comes with headband.

- accessories
-  · 2 types of eyeglass parts (clear, frame only) x— 1 each
-  · Display pedestal x— 1
-  · Headband x— 2
-  · Forearm parts for replacement (left and right) x— 1 each

RM81.10
RM81.10 Request Stock
Quick View
img
SAVERM35.80

[057] HGBF 1/144 Ninpulse Gundam

- Gundam Build Fighters Gundam Modeling Appeared in New Project Highest Fast HG!

- One body of Gundam appeared in the new project is commercialized with HGBF!
- The design that makes the name and sum feel "[ninja]" feel something that leads to Sengoku Astray ...

-GIMMICK-
The back pack is deformable and reproduces the mantle form covering the whole body.
It can be further deformed and equipped as a large-sized shuriken.

-WEAPONS-
1: The rear skirt can be transformed into a sword and equipped.

2: The blade equipped on the arm is flexibly movable and can pose like a ninja.

- accessories
-  · Large cloak x— 1
-  · Sword x— 1
-  · Beam x— 2

RM72.00
RM72.00 Request Stock
Quick View
img
SAVERM94.90

P-Bandai Exclusive: MG 1/100 Psycho Zaku Ver.Ka Final Battle Ver.

P-Bandai Exclusive: MG 1/100 Psycho Zaku Ver.Ka Final Battle Ver.
Estimate Arrival - November2017

RM444.20
RM444.20 Request Stock
Quick View
img
SAVERM38.70

P-Bandai Exclusive: MG 1/100 Full Armor Gundam Thunderbolt Ver.Ka Final Battle Ver.

P-Bandai Exclusive: MG 1/100 Full Armor Gundam Thunderbolt Ver.Ka Final Battle Ver.
Estimate Arrival - November 2017

RM368.60
RM368.60 Request Stock
Quick View
img
SAVERM25.00

P-Bandai : HGUC 1/144 Pale Rider (Space Equipment Type)

P-Bandai Exclusive: HGUC 1/144 Pale Rider (Space Equipment Type)


The Pale Rider gets its space equipment upgrade in its new HGUC model kit! This kit offers variety of newly molded parts for its additional armor attachment and expanded equipment for space use!

The kit shares its main body's molds from its previous version, HGUC 1/144 Pale Rider, with updated parts to accommodate various equipment specially molded for the Space Equipment unit.

It is also possible to reproduce the appearance when HADES was activated! Both clear green and clear red visors are available for mode changes.

The kit is completed with its giant gatling that is directly attached to its backpack using its bullet feed belt. A hyper beam rifle is also included as an alternative firepower equipment, a pair of beam sabers, and a shield!

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM20.70

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0
Estimate Arrival: December 2017


The infamous Red Comet, Check out the Premium Bandai Edition of the RX78-2 Casval Gundam in the version of 3.0! 

RM255.20
RM255.20 Request Stock
Quick View
img
SAVERM4.50

FG 1/144 MS-06S Char's Zaku II

FG 1/144 MS-06S Char's Zaku II

  • Is a first grade kit released by bandai
  • includes: FG 1/144 MS-06S Char's Zaku II, Zaku II Machine Gun
  • Item Size/Weight: 19.5 x 13 x 4cm/ 125grams

RM13.50
RM13.50 Request Stock
Quick View
img
SAVERM191.20

MG 1/100 Gundam 00 XN Raiser

MG 1/100 Gundam 00 XN Raiser


From the Mobile Suit Gundam 00V side story, the 00 XN Raiser joined the MG lineup! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. Four types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head. (2 LR41 batteries required; sold separately). Water-slide decals for added detailing are included. Set includes GN Buster Sword III, GN Sword II, GN Sword III, GN Beam Saber, and GN shield, LED unit, and instructions.

Accessories:
- GN Sword II x 2
- GN Buster Sword III x 1
- GN Beam Saber x 2
- GN Shield x 1 [2 parts]
- 0 Raiser x 1

RM288.00
RM288.00 Request Stock
Quick View
img
SAVERM40.00

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

RM280.00
RM280.00 Request Stock
Quick View
img
SAVERM79.60

MG 1/100 RGM-79SC GM Sniper Custom

- Popular project [Mobile Suit Gundam MSV] first commercialized Jim · Sniper Custom as 1/100 scale.

- Although it follows the image of the setting, it is three-dimensionalized with the sharp style of the latest MG format.
- Posing at impressive sniper can be reproduced with a wide range of movable mechanisms adopted for arms, chest, etc. In addition to abundant weapon parts, it is possible to perform various action poses.
- The main weapon [R-4 type beam · rifle] is new design according to MG conversion. Carrying state can be reproduced by folding mechanism.
- Various arms such as [folding type hand gun] of the right arm are also included.
- The characteristic head is reproduced by new modeling. Visa opening and closing gimmicks such as fighting war time are loaded.

- Accessory:
R-4 type beam rifle x 1

double beam gun x 1
hyper . bazooka x 1 
beam . spray gun x 1
beam . saber x 1
folding type hand gun x 1
shield x 1

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
RM269.30 Request Stock
Quick View
img
SAVERM47.80

[062] HGBF 1/144 Winning Fumina

HGBF 1/144 Winning Fumina



- Goddess again !! From `Sup 'to' Unfortunately 'Superficial Evolution

[Point 1] A wide range of posing is possible!
- For the joints, use KPS material that is adopted for [HGBF Chinagai] [HGBF Yahoo! Gyan child].
- In addition, the armor is designed not to disturb movements, and various action poses can be reproduced!

[Point 2] Whole-body modeling of commitment!
- The design of the head is completely new based on the design of [Figure-riseBust Hoshino Fumina].
- There is no shared parts with [HGBF Super Funa], it is a stereoscopic sticking to everything from realistic clothing wrinkles to skin texture. Seals are also included that can change the line of sight.

[Point 3] Overwhelming play value!
- The armor parts covering the whole body are removable.
- Further separated armor parts can be reassembled into a support mechanism [Super Deluxe Winning Gundam (Tentative)] that imaged [SDBF Star Winning Gundam].
- Weapons using clear parts, equipped with a deformation mechanism to a variety of forms.

- accessories
Beam rifle x 1
Effect parts (large) x 4
Effect parts (small) x 4
Hand grip (right and left) x1 each
Hirate (left and right) x 1 each
Display base x 1

- Product content
Molded article x 12
Seal x 1
Instruction manual x 1

RM96.00
RM96.00 Request Stock
Quick View
img
SAVERM60.90

P-Bandai: HGBF 1/144 Gundam X Jumaoh

P-Bandai: HGBF 1/144 Gundam X Jumaoh


Release : Nov. 2017
Estimated delivery : Dec 2017

RM119.10
RM119.10 Request Stock

Showing 1711 - 1740 of 2616 products