• Home
  • Showing Gundam Model Kits + REAL GRADE (RG) product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + REAL GRADE (RG) product(s)

Showing 31 - 60 of 93 products

Quick View
img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
RM90.00 Request Stock
Quick View
img
SAVERM25.00

Fat Cat Model 1/100 Gundam RX-78-2 Ver. 9RYU（RG 2.0 Ver.)

Fat Cat Model 1/100 Gundam RX-78-2 Ver. 9RYU?RG 2.0 Ver.)

Brand : Fat Cat

Scale : 1/100
Grade : RG
Ver. : 9RYU
Model : Gundam RX-78-2

This is a FatCat brand RG Ver.20 but scale 1/100 RX-78-2 model.
Please note that this is non-Bandai product.

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM69.70

[017] RG 1/144 Wing Gundam Zero Custom EW

  • "Wing Gundam Zero EW" as Real Grade featuring detail is reproduced through the utilization of actual techniques, an investigation of the settings, and a new interpretation of the properties of the machine. 
  • The structure of the main wing is based on material technologies used in real aircraft. 
  • Considering the heat-resistance and machine protection during atmosphere entry, the armored structure for the interior of the wings is designed using a pinnate mold. 
  • The main wing section utilizes cutting-edge aircraft and combat aircraft technology and is designed to have a movable structure. Closely resembling a bird's wings, each section of the curved "flexible wings" is capable of moving in 3-dimensions. 
  • The "Zero Frame", which can move by itself, is designed through consideration of the internal structure of the latest autonomous robots. 
  • The utilization of new Advanced MS Joints permits human-like movements. 
  • The Twin Buster Rifle Combination Mechanism can be reproduced. 
  • Runner x9, Realistic decal x1, Instruction manual x1 

RM98.00
RM98.00 Request Stock
Quick View
img
SAVERM39.20

P-Bandai Exclusive: RG 1/144 Freedom Gundam (Deactive)

- [Gundam SEED] than the RG Freedom Gundam comes a lead aircraft. Actual negotiations Based on repeatability of wing shape and moving with a new frame has been pursuing a strict realism. - MA-M20 Lupus medium-range beam rifle shooting ... special weapons Freedom Gundam. Add stock and allow to shield and attached. - Rakeruta saber saber ... reproduce the `beam 'in clear plastic portion. The two In addition to gimmicks to be bound, can be attached to the waist. - Hi Matt ... Wing is equipped with a gimmick mode deployment, the actual shape is overlaid investigation Good design. `` High Mach mode can reproduce a high-mobility form of air combat wing deployed. - Anti-laminated beam shield can be mounted on the arm .... Mounting base can slide up and down So, the degree of freedom of mounting position, the backside of the cartridge details such as energy Rich in detail. - Full Burst Mode. Thrale sphere with the clock mounted on both sides of the gun waist, wing Convergent beam plasma cannon expandable Baraena that joint. - RG Freedom Gundam is composed of nine runners. Boasts unparalleled ease of assembly Advanced internal frame joints de MS, and detailed consideration to the actual armor division, If RG is in the `Gundam` s. - Accessories: Rakeruta saber × 2, anti-laminated beam shield Lupus beam rifle, look in the wrist (left), with rifle wrist (right)

RM160.80
RM160.80 Request Stock
Quick View
img
SAVERM48.40

P-Bandai Exclusive: RG 1/144 Gundam Astraea Type-F

P-Bandai Exclusive: RG 1/144 Gundam Astraea Type-F

RM251.40
RM251.40 Request Stock
Quick View
img
SAVERM16.50

P-Bandai Exclusive: RG 1/144 GNY-001 Gundam Astraea Expansion Unit

  • for RG 1/144 Exia use only (that is being sold seperately).
  • This set consists of parts for the Exia to be modified to become RG Astraea.
  • It also comes with armor like GN Launcher, Proto GN Sword, etc.

RM113.40
RM113.40 Request Stock
Quick View
img
SAVERM40.40

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM120.20

P-Bandai Exclusive: RG 1/144 00 Raiser Trans-Am Mode (Gloss Injection)

  • Release already
  • THis is P-Bandai JPN limited release item!
  • The ultimate machine in Gundam 00 anime series- finaly in ultimate trans-am mode!
  • The exterior parts adopted the gross injection molding, and reproduce the aircraft color shining red in metallic molding color shiny.
  • Comes armed: GN Sword III / GN Sword II / GN beam saber / GN shield.
  • This is prepainted plastic model kits, require simple snap-fit assembly only

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM99.81

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

RM188.00
RM188.00 Request Stock
Quick View
img
SAVERM69.70

[021] RG 1/144 Gundam 00 Qan[T]

[21] GNT-0000 00 QAN[T] Gundam (RG)
  • Appeared finally to RG is Quanta hugely popular!
  • CONCEPT
    Pursuing a structure that feel [realistic] from the assembly stage. 
    Exia, followed the history that has been developed in light of the Double O, while utilizing the Advance de MS joint of the same type, reproduce the aircraft characteristics of Quanta. By renew the joint structure and mechanical gimmick, to achieve a high mobile performance and the amount of information.
  • RG ever largest action of
    Such as the Sword by renewed movable shaft position and the movable angle of the arm joints protrude horizontally, it improved posing performance.
    Greatly extend the range of motion of the leg by renewed moving method of waist armor. Achieve a more dynamic action poses.
  • Realistic gimmick that created from historical research based on real technology
    Renewed the GN drive attaching and detaching mechanism, fully reproduce the mechanical removable gimmick by adopting a mounting gimmick that also serves as fixing of the back pack.
    By providing the moving point of up to seven, realizing a flexible arm moving.
    GN shield deployment by the arm is to renew the movable shaft, achieve a high range of motion!
  • GN capacitor mounted frame
    While utilizing the Advanced MS joint of RG Exia the same type, the arm is completely new parts reproduction. The reproducibility capacitor disposed systemically.
  • Bit recombinant gimmick GN Sword V
    Characteristic weapon of double oak Anta - bit recombination gimmick also complete reproduction. Grip is equipped with a slide deployment mechanism. GN Sword bit can be attached to the shield.
  • Accessories: GN Sword V, GN sword bit, GN shield, simple stand, weapon possession (left and right), fist (left and right), the movable hand (left and right), palm (left), pilot figure


Item Size : 31 x 19 x 7.5 cm

RM98.00
RM98.00 Request Stock
Quick View
img
SAVERM60.00

P-Bandai RG 1/144 Tallgeese III


Premium Bandai has finally announced the release of the 3rd variant of the Tallgeese! The Tallgeese III will be rolling out with newly molded equipment, and new set of decals.

[ACCESSORIES]
-Mega Cannon
-Heat Rod
-Shield
-Beam Saber

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM49.80

[031] RG 1/144 Crossbone Gundam X1

RG 1/144 Crossbone Gundam X1 

The Real Grade Crossbone Gundam launches in May! This kit is a part of the GUNDAM EVOLUTION PROJECT which offers "extreme details" that features extended articulation for the RG framing and additional exploration to its part separation!

More images and info will be added later.

[ACCESSORIES]

  • Anti beam cloak
  • Beam Zanber
  • Core Fighter
  • Buster Gun
  • Beam Shield / Brand Marker

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM69.00

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom


This kit comes with a new set of decals and slightly remolded head armor piece to accommodate its antenna.

The black part of the head can reproduced by applying a decal seal that comes with the kit.

[ACCESSORIES]

  • * Giant Bazooka
  • * Zaku Bazooka
  • * Zaku Machine Gun
  • * Heat Hawk

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM79.70

[035] RG 1/144 Wing Gundam (TV Ver.)

The long-awaited RG version of the TV version of Wing Gundam with completely new modeling!
?? Various gimmicks to reproduce the setting mechanism and poses in the play, and the original gimmick based on the actual machine verification are condensed to 1/144 scale.
?? Introduced an original movable gimmick with the image of a bird in the wing part based on the actual machine verification unique to RG.
?? Advanced MS joint is used for the base of the wing.
?? Built-in movable gimmicks on shoulders and body block to reproduce the dynamic posture of Buster rifle and beam saber.
?? By rearranging the parts, it can be transformed into a bird form.
?? By using action-based compatible parts, it is possible to display not only in MS state but also in bird form.

[Accessories]
?? Buster rifle x 1
?? Shield x 1
?? Beam saber x 1
?? Hand parts (left and right) x 3 types each
?? Weapon holder (right) x 1 type
?? Action base compatible parts x 1
?? Realistic decal x 1

RM112.00
RM112.00 Request Stock
Quick View
img
SAVERM104.60

[032] RG 1/144 V Gundam / Nu Gundam

Amuro lay boarding aircraft appeared in [Shizua of Mobile Suit Gundam counterattack] lineup in RG!

-Various gimmicks to reproduce the setting mechanism and the poses in the play, and the original gimmicks based on real machine test results are condensed to 1/144 scale.
-With precise parts configuration, it creates both 1 / 1s image and enjoys both fun and decorating.
-Gundam's distinctive coloring is reproduced in molded color. The white body uses three light gray molded colors to increase information density.
-Joints are built into the shoulders and abdomen, and can move flexibly. It enables twisting and shoulder extrusion, resulting in more dynamic posing.
-Armor on the shoulder has a built-in mechanism that expands in tandem with the internal joint. By expanding the range of motion of the shoulder, reduce the interference between parts that occur in posing etc. holding an arm.
-The lumbar joint moves finely for each block, expanding the movable range of the leg. The knee can be pushed forward widely, and a powerful pose with a wide stance can be produced even at 1/144 scale.
-The legs are equipped with [Multilink Gimmick] where the armor slides in conjunction with the movement of each joint. Poses with large knees are also reproduced naturally.

[accessories]
* Beam *  rifle x 1
* Fin *  Funnel x 6
* New hyper bazooka x 1
* Shield (Beam *  Canon) x 1
* Beam saber (backpack part, arm part) x 1 each
* Missile x 1 type

[Item content]
* Molded articles x 13
* Realistic decal x 1
* Instruction manual x 1

RM147.00
RM147.00 Request Stock
Quick View
img
SAVERM50.00

P-BANDAI: RG 1/144 Sword Impulse Gundam

The Sword Silhouette for the Force Impulse Gundam has finally arrived in the Real Grade model kit series! The new silhouette offers variety of new changes to the Force Impulse features, including the newly molded parts for its Flash edge beam boomerang that can also be separated into two.

RM230.00
RM230.00 Request Stock
Quick View
img
SAVERM136.90

[034] RG 1/144 Zeong

[READY STOCK] 


To commemorate the 40th anniversary of Gunpla, [Zeong] from [Mobile Suit Gundam] has been converted to RG with the latest technology and design!

-In order to reproduce the mechanism on the setting and the pose in the play, the original gimmick based on the actual machine verification is condensed to 1/144.
-Built-in [Advanced MS Joint]. Achieves both smooth and powerful expression and detailed details.
The mono eye can be moved to the left and right according to the movement of the neck. It can also be moved up and down manually.
-Built-in frame with a wide range of movement at the waist. Allows for more dynamic poses.

Four vernier on the chest and back are deployed in conjunction with the front-back movement of the chest.
-Each large and small vernier can be moved greatly individually by expanding the skirt part.
-The hand parts are insert-molded to reproduce precise details and movable joints.
-Reproduce the arm wired mega particle cannon by removing the forearm and attaching the lead wire.

[accessories]
* Display base x 1
* Lead wire (red) x 1* Lead wire (black) x 2* Realistic decal x 1

RM192.50
RM192.50 Request Stock
Quick View
img
SAVERM10.00

P-Bandai : RG 1/144 RX-78-2 GUNDAM (TEAM BRIGHT CUSTOM)

 ** Action base is sold separately

 
Weapon:
Beam Rifle / Beam Saber / Shield / Hyper Bazooka

RM210.00
RM210.00 Request Stock
Quick View
img
SAVERM-30.00

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

RM198.00
RM198.00 Request Stock
Quick View
img
SAVERM22.00

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)

RM198.00
RM198.00 Request Stock
Quick View
img
SAVERM10.00

Limited RG 1/144 Crossbone GUNDAM X1 (Titanium Finish)

LIMITED RG 1/144 CROSSBONE GUNDAM X1 (TITANIUM FINISH)

RM280.00
RM280.00 Request Stock
Quick View
img
SAVERM112.10

[036] RG 1/144 Hi-ν Gundam Hi-Nu Gundam

  • Hi-? Gundam that appears in "Mobile Suit Gundam Char's Counterattack Beltorchika Children" has appeared in RG in pursuit of new interpretation of detail expression and reality!
  • Equipped with a multi-link gimmick that slides the armor in conjunction with the movement of each joint. The armor of each part can be slid to expose the mechanical internal frame.

[Accessories]
  • Beam rifle x 1
  • New Hyper Bazooka x 1
  • Shield x 1
  • Beam saber (handle x 3, beam blade x 2)
  • Hand parts (left and right) x 3 types each
  • Weapon holder (Right) x 1 type
  • Realistic decal x 1

RM157.50
RM157.50 Request Stock
Quick View
img
SAVERM30.00

Event Limited RG 1/144 Force Impulse Gundam [Titanium Finish]

Event Limited RG 1/144 Force Impulse Gundam [Titanium Finish]

RM350.00
RM350.00 Request Stock
Quick View
img
SAVERM0.00

Event Limited RG 1/144 Crossbone Gundam X1 (Clear Version)

Event Limited RG 1/144 Crossbone Gundam X1 (Clear Version)

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM104.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM147.00
RM147.00 Request Stock
Quick View
img
SAVERM10.00

P-Bandai : RG 1/144 MS-06R-1A SHIN MATSUNAGA'S ZAKU II

From [MOBILE SUIT GUNDAM MSV], MS-06R-1A Shin Matsunaga\'s Zaku II is released in the RG series, which pursues realism and precise expression not seen in other 1/144 varieties.


The body of  MS-06R-1A Shin Matsunaga\'s suit is thoroughly reproduced with new molding !
??
?? Right Shoulder
???The right shoulder is equipped with a duct and reproduced with new molding. The realistic finish is 
       created with molding and realistic decals.
?
?? Shield
???The shield is thoroughly reproduced with ribbing along both sides.
??
?? Front armor
???New details are added to the front armor.
?
?? Backpack
???The form of the 06R-1A backpack is faithfully reproduced, with a slightly downsized tank and an 
       added fook in the center.
?
?? Legs
???The exterior shape of the legs differ from 06R-2, and are reproduced with almost entirely new parts.
???A different vernier shape is also reproduced.

RM220.00
RM220.00 Request Stock
Quick View
img
SAVERM10.00

Fat Cat Model 1/100 God Gundam (RG Ver.)

Fat Cat Model 1/100 God Gundam (RG Ver.)

Brand : Fat Cat

Scale : 1/100
Grade : Real Grade 
Model : God Gundam

This is a FatCat brand RG Ver. but scale 1/100 God Gundam model.
Please note that this is non-Bandai product.

RM120.00
RM120.00 Request Stock
Quick View
img
SAVERM30.00

P-Bandai : RG 1/144 HIGH MOBILITY TYPE ZAKU Ⅱ (TEAM BRIGHT CUSTOM)

** Action base is sold separately

 
Weapon:
Long beam rifle / beam saber / shield

RM230.00
RM230.00 Request Stock
Quick View
img
SAVERM65.70

[039] RG 1/144 Force Impulse Gundam Spec II

The Force Impulse Gundam from "Mobile Suit Gundam Seed Freedom" is now available as an RG model kit from Bandai in its movie-version specifications! 
The mechanism that becomes the MS form by combining the Core Splendor, Chest Flyer, Leg Flyer and Force Silhouette is included.
An advanced MS joint with insert molding is applied to the Core Splendor and fuselage. 
The internal frame and body frame can be separated from the runner already assembled, which allows for precise details and movable gimmicks. 
The color reproduction has been improved by dividing the parts, with even the minute differences between adjacent armor parts precisely expressed. 
The wings can be folded backwards, and the forearms can be twisted on a separate axis from the elbows. 
The shoulder armor rotates independently to reduce parts interference. 
The waist parts move block by block to ensure a wide range of motion. The knee armor moves in conjunction with the legs. 
Four types of hands for each side are included, as well as a beam rifle, shield, knife and beam saber. New realistic decals are included as well.

Order yours today!

[Includes]:
  • High-energy beam rifle
  • Mobile mantlet
  • Vajra beam saber (x2)
  • Folding Razor anti-armor knife (x2)
  • Silhouette fluyer
  • Core Splendor parts (x1 set)
  • Hand parts (x1 set)
  • Joint parts
  • Realistic decals

RM120.00
RM120.00 Request Stock
Quick View
img
SAVERM103.60

[043] RG 1/144 Wing Gundam Zero (Colonies Liberation Organization Mobile Suit XXXG-OOWO)

Wing Gundam Zero is three-dimensionalized with a completely new design! The Wing Binder is the key to overwhelming mobility and flight ability, and is equipped with an original gimmick unique to RG!

 The joint part of the Wing Binder is equipped with a 5-axis movable point, realizing flexible posing.
 The vernier inside the Wing Binder has a built-in interlocking gimmick that rotates the unit, extends the internal nozzle, and deploys the fins at the same time.
 By rearranging the parts, it can be transformed into Neo Bird form. Equipped with a transformation gimmick of the leg tip that imagines the play.
 The shoulder armor deploys to expose the vernier. The beam saber can also be stored.
 In addition to the cockpit hatch, the chest intake cover can be opened and closed.
 The machine cannon deploys by opening and closing the cover on the top of the chest intake.
 The hip joint is equipped with two swing axes that can move independently. By sinking the waist, more flexible posing is possible.
 Equipped with a gimmick that deploys the knee armor and shin armor in conjunction with the bending of the knee. Smooth bending of the knees is achieved.
 Twin Buster Rifle can be combined/separated. The barrel extends and retracts as an original RG gimmick, creating a powerful effect when firing.
 The shield features an extendable nose block and an original RG gimmick of interlocking small wings.
 A locking mechanism is installed in the weapon handle, increasing the holding power when holding the Twin Buster Rifle.

[Accessories]
  • Twin Buster Rifle x 1
  •  Beam Saber x 2
  •  Shield x 1
  •  Hand parts x 1 set
  •  Realistic decal x 1

RM148.00
RM148.00 Request Stock

Showing 31 - 60 of 93 products