Price Clear







Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

Showing 391 - 420 of 454 products

img
SAVERM170.90

MG 1/100 Strike Freedom Gundam (Extra Finish)

  • Metallic coating in addition to its fantastic detail, high quality, and super posability! 
  • The Mobile Suit is equipped with its high energy beam rifles, Super Lacerta beam sabers, beam shield, Xiphias rail guns, and its most distinctive and powerful weapon of all, the Super Dragoon mobile weapon wings, which can extend and detach from the main wing frames. 
  • In-scale, silver-color figures of pilot Kira Yamato (sitting and standing) and Lacus Clyne are included. 
  • Stickers and dry-transfer decals are provided, along with a custom display base to assist with dynamic poses. Weight:1776g

RM380.00
img
SAVERM106.00

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM224.90
img
SAVERM47.40

MG 1/100 Gundam Spiegel

  • From the hilarious and utterly bizarre alternate-universe Gundam series G Gundam, comes the Neo Germany entry in the fray, Gundam Spiegel. 
  • 2nd model from the G Gundam series! 
  • Also included are unpainted 1/20 figures of Schwarz Bruder and Rain Mikamura. Simple instruction included in a box. 
  • Weight:1000g

RM102.50
img
SAVERM147.40

P-Bandai: MG 1/100 Gundam Exia Repair II [REISSUE]

REISSUE ITEM


Release date : Dec, 2017

Estimate delivery : Jan, 2017


From "MOBILE SUIT GUNDAM 00", GUNDAM EXIA REPAIR II is here in Master Grade!!


Body shape and new weapons all faithfully replicated in brand new design! Colors from setting recreated by molded color


The new weapon, GN Sword Kai replicated in new design

The destructive GN Sword Kai newly changed along with GUNDAM EXIA REPAIR II is included with brand new design. The signature edge part of the beam sword uses clear material to show the sharpness and beauty from the show. The folding system of the sword is recreated, along with gimmicks to set on the arm or expand its shape.

 

Characteristics of the Mobile Suit faithfully replicated.

The surface parts of "REPAIR II" is faithfully replicated in new design based on "MG GUNDAM EXIA"


New thruster nozzles added to the shoulder armor, back armor, and the back of the calves, changing its shape. Other details, such as the codes on the arms and legs are switched to inner-armor type so changed the surface armor parts of the same places, are fully supervised to recreate REPAIR II.

 

Various option parts

Water transfer decal stickers for more detailed marking and weapons

GUNDAM EXIA has used are included as kit value to expand the possibility of posing.

 

Weapons: GN Sword Kai x 1 / GN Beam Saber x 2 / Shield (GN Long Blade x1 / GN Short Blade x1 / GN Beam Dagger x 2)


RM282.60
img
SAVERM70.00

P-Bandai: MG 1/100 Altron Gundam EW Ver. (Nataku)

Note : Box is slightly dented but the runners are still in good condition.

From "MOBILE SUIT GUNDAM WING?Endless Waltz", the MG 1/100 Altron Gundam has finally been made available into a kit!
???
???Mobile Suit XXXG-01S2
???Wufei named this machine "Nataku"
???
From “MOBILE SUIT GUNDAM WING Endless Waltz", the MS Altron Gundam, enhanced version of the Shenron Gundam,
releases in the Master Grade Series.
It is named “two-head dragon(er-tou-long)?ALTRON” because of the characteristic weapon “Dragon Hang” equipped on both arms,
and now reproduced with a new design which is based on Master Grade standards.
????
* The 2 characteristic weapons is repoduced with new design!
??Includes the Dragon Hang and Twin Beam Trident with a new design based on Master Grade standards.
??
?(Dragon Hang)
??The stretch structure which shows the storage and attack position of the arm is recreated.
??The claw tip is movable on two-axis, and can be stretched, opened and closed.
??An arm block for extension is included, and it is possible to obtain a powerful pose display according to the scene.
??Includes 2 auxiliary stands which allows a stable display of the Dragon Hang for the attack pose.
?
?(Twin Beam Trident)
??The handle comes with various detailed new parts.
??Output ports are at both ends, which allows to mount the clear molded beam blades onto both sides.
??After removed the Beam Blades, the Beam Trident can be attached and carried on the backpack.
??
* Comes with BRAND NEW Character Figures??
????Includes a newly designed same-scale figure of Chang Wufei wearing the uniform of Marimeia troops (standing / sitting)
?
* Comes with a new design of water slide decals!
?
Weapons: Dragon Hang x 2 / Twin Beam Trident

RM380.00
img
SAVERM63.90

MG 1/100 RX-78-2 Gundam Ver. O.Y.W. 0079

  • This is RX-78-2 as it appeared in the PS2 "Mobile Suit Gundam: The One Year War" game. 
  • With Bandai's superbly flexible inner frame, over which sharply molded armor is placed, the final product can bend and pose in just about any position you might imagine. 
  • Parts are all molded in color and snap together; polycaps make the joints move smoothly. Bolts hold the frame together securely. Dry-transfer decals allow you to add exterior markings with precision.

RM128.00
img
SAVERM74.90
RM105.00
img
SAVERM84.90

Gao Gao MG 1/100 Gundam Exia (Ignition Mode)

Gao Gao MG 1/100 GUNDAM EXIA (IGNITION MODE)
Series: Gundam
Grade: Master Grade
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Product

RM95.00
img
SAVERM79.90

MG 1/100 MS-09 Dom

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  
Bandai's Master Grade Dom is here! Whereas some of the kits in the Master Grade series have their overall appearance changed somewhat from the original Gundam animation, the Dom is quite true-to-form, retaining the short, stocky proportions of the original. But all the Master Grade goodies you'd expect are here! Fully-posable at all joints; extensive internal detail; individually-posable finger joints; numerous weapons, including the laser sword, machine gun, two bazookas and Panzerfausts. Most of these mount right on the Dom's back or hips for firing and/or storage. Of course, the kit is also molded in color, and features snap assembly. Have fun!

RM160.00
img
SAVERM114.80

MG 1/100 Gundam Exia Dark Matter

  • Accessories: Prominence Blade, plies Nickl Blade, Dark Matter rifle, dark matter Blade × 2, beam saber × 2, beam saber (short) × 2

RM185.00
img
SAVERM21.00

P-Bandai Exclusive: MG 1/100 Gundam Astray Red Frame

  • Color reproduction of precision parts split in if MG frame characteristic, the exterior.
  • Apart from the weapon Gerbera Straight typical Gundam Astray Red Frame, it is attached with our one and the other brother is a sword, the Tiger Pierce.
  • Mountable new parts are supplied with two swords in the lower back.
  • Figures of the same scale of low Gyuru is attached. (Standing / cockpit)
  • Other personal mark of wax, Gerbera Straight "chrysanthemum character", Tiger Pierce of "tiger rut",
  • Water transfer decal attached formula was recorded in abundance as well as caution mark.
  • Armed included: Gerbera Straight, Tiger Pierce, beam rifle, beam saber, shield
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM278.80
img
SAVERM89.60

MG 1/100 Gundam Double X

  • MG Gundam Double X shares the internal frame and reflector unit system with MG Gundam X. The design enhances the credibility of it as a successor machine. 
  • The reflectors can be spread when the Twin Satellite Cannons are in use. 
  • The interior of the reflectors utilizes the same mirror sheet as MG Gundam X for recreating the light-focusing state. 
  • Radiators on the forearms and calves can be expanded. By opening the outer covers, the internal blades can be fanned out together. 
  • The cannons slide and open. By locking them on the frame of the shoulder cameras, their position can be reliably maintained. The angle of firing can be adjusted. 
  • Runner x18, Foil sticker x1, Tetron sticker x1, Mirror sheet x1, Instruction manual x1

RM180.00
img
SAVERM9.00

P-Bandai Exclusive: MG 1/100 Tallgeese II

- Accessories: Dover gun, shield, beam saber dolls Standing × 2,1 / 100 ZX Doll 1/100 ZX pilot, fist (left and right), palm (left and right), hand grip for arms (left and right) 


( This is a machine translation. Please allow for possible misinterpretations in the text. )

RM290.00
img
SAVERM40.00

P-Bandai Exclusive: MG 1/100 Tallgeese III

P-Bandai Exclusive: MG 1/100 Tallgeese III


Brand : Premium Bandai
Model : Tallgeese III
Scale : 1/100
Grade : Master Grade

RM380.00
img
SAVERM92.60

P-Bandai Exclusive: MG 1/100 Astray Noir Gundam

  • This is Bandai Hobby Limited release.Second Revise has been released in MG!
  • The faithfully reproduced in color molding the body color which was based on red and black
  • Equipped with the back of a large striker Noir.
  • The Noir striker, it is equipped with a variety of gimmick deployment, such as the separation of weapons
  • Weapon 'Sword pistol' distinctive combination of Japanese sword and gun accessories. Can be mounted in the lower back
  • Accessories figure of the same scale of Dante Goldie Giani is (falling / cockpit)
  • other personal mark of Dante, water transfer decal attached formula was recorded in abundance as well as caution mark
  • Armed included: (including Furagawahha 3) Sword pistol, Noir Striker, beam rifle

RM302.40
img
SAVERM10.00

P-Bandai Exclusive: MG 1/100 Impulse Gundam Blanche

P-Bandai Exclusive: 1/100 Impulse Gundam Blanche (MG)



RM380.00
img
SAVERM119.50

MG 1/100 Justice Gundam

The Justice Gundam from "Gundam Seed" joins the Master Grade kit lineup from Bandai! The Fatum-00's beam cannon base can be displayed in flight form without any parts swapping, and the Fatum-00 can also be ridden by the Justice Gundam and displayed in flight!  The Justice Gundam is armed with one Lupus beam rifle, two Lacerta beam sabers, one Bassel beam boomerang, and the laminated anti-beam shield.  The cockpit opens and closes, and a pilot figure is included; it also comes with stickers and dry-transfer decals for markings

RM168.00
img
SAVERM125.90

MG 1/100 Freedom Gundam Ver.2.0 & Figure-rise Bust Kira Yamato (Dramatic Combination)

- [Mobile Suit Gundam SEED] MG & figures rise bust of special set appeared to reproduce the world of!

- Dedicated display stand included for the special set!

- Package adopted a new illustrations drawn!
- A new instruction manual included!

- accessories
-   AMA-M01 Rakeruta-beam saber x 2
-   MA-M20 Alps beam rifle
Laminate anti-beam shield
- Grip hand (left and right)
- Open hand (left and right)
Weapon Possession (grip) (left and right)
Weapon Possession (gun) (right)
- Pedestal (for Kira Yamato)
Dedicated display pedestal (for MG Freedom Gundam Ver.2.0)

RM215.50
img
SAVERM20.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM270.00
img
SAVERM25.00

[Daban] 6642 MG 1/100 Phenex Gundam

[Daban] 6642 MG 1/100 Phenex Gundam
Series: Gundam
Grade: MG
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai Product

RM135.00
img
SAVERM20.70

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0
Estimate Arrival: December 2017


The infamous Red Comet, Check out the Premium Bandai Edition of the RX78-2 Casval Gundam in the version of 3.0! 

RM255.20
img
SAVERM167.20

MG 1/100 Gundam 00 XN Raiser

MG 1/100 Gundam 00 XN Raiser


From the Mobile Suit Gundam 00V side story, the 00 XN Raiser joined the MG lineup! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. Four types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head. (2 LR41 batteries required; sold separately). Water-slide decals for added detailing are included. Set includes GN Buster Sword III, GN Sword II, GN Sword III, GN Beam Saber, and GN shield, LED unit, and instructions.

Accessories:
- GN Sword II x 2
- GN Buster Sword III x 1
- GN Beam Saber x 2
- GN Shield x 1 [2 parts]
- 0 Raiser x 1

RM336.00
img
SAVERM40.00

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

P-Bandai Exclusive: MG 1/100 RX-121 Gundam TR-1 Hazel

RM280.00
img
SAVERM79.60

MG 1/100 RGM-79SC GM Sniper Custom

- Popular project [Mobile Suit Gundam MSV] first commercialized Jim · Sniper Custom as 1/100 scale.

- Although it follows the image of the setting, it is three-dimensionalized with the sharp style of the latest MG format.
- Posing at impressive sniper can be reproduced with a wide range of movable mechanisms adopted for arms, chest, etc. In addition to abundant weapon parts, it is possible to perform various action poses.
- The main weapon [R-4 type beam · rifle] is new design according to MG conversion. Carrying state can be reproduced by folding mechanism.
- Various arms such as [folding type hand gun] of the right arm are also included.
- The characteristic head is reproduced by new modeling. Visa opening and closing gimmicks such as fighting war time are loaded.

- Accessory:
R-4 type beam rifle x 1

double beam gun x 1
hyper . bazooka x 1 
beam . spray gun x 1
beam . saber x 1
folding type hand gun x 1
shield x 1

RM160.00
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
img
SAVERM76.00

[Daban] 8803 MG 1/100 Gundam Double X

[Daban] 8803 MG 1/100 Gundam Double X

Brand : Daban
Code : 8803
Scale : 1/100
Model : Double X Gundam

Please note that this is Non-Bandai product 

RM99.00
img
SAVERM87.60

MG 1/100 RGZ-91 Re-GZ

MG 1/100 RGZ-91 Re-GZ


The Master Grade Version of the Re-GZ released on the Year 2001. Comes with Shield x 1, Rifle x 1,Beam Saber x 2. The has got the Back Weapon System, which the Model Kit can turn into Wave Rider Mode.
Comes with 21 x Runners, 1 x Foil Sticker, 1 x Decal Sticker, 1 x Dry Transfer and 1 Instruction Manual. Weights 806gram.

RM152.00
img
SAVERM315.00

P-Bandai: MG 1/100 Justice Gundam Special Coating Ver.

P-Bandai: MG 1/100 Justice Gundam Special Coating Ver.


Release date : Nov, 2017
Estimate delivery : Dec, 2017

RM585.00
img
SAVERM120.00

P-Bandai: MG 1/100 XXXG-01SR Gundam Sandrock Custom EW

P-Bandai: MG 1/100 XXXG-01SR Gundam Sandrock Custom EW


Reissue Date : Feb 2020
Estimate Delivery : March 2020

Package include
- Heat Shotel x 2
- Diffusing Cloak
- Beam Machine Gun x 1
- Shield x 1  
- Sandrock Water Decal

RM300.00
img
SAVERM239.80

P-Bandai: HGBF 1/144 Psycho GM

P-Bandai HGBF 1/144 Psycho GM


Release Date : Dec, 2017
Estimated Delivery : Jan, 2017

RM340.20

Showing 391 - 420 of 454 products