• Home
  • Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

Showing 361 - 390 of 454 products

Quick View
img
SAVERM57.10

MG 1/100 RX-78-2 Gundam One Year War (w/clear parts)

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RM134.80
RM134.80 Request Stock
Quick View
img
SAVERM89.90

MG 1/100 Delta Plus

  • The completely transformable Delta Plus Mobile suit appears as an MG! 
  • Using careful modeling techniques, this kit can transformation mechanism to Wave Rider form is fully realized!
  • Wave Rider form equipped with a locking mechanism to prevent accidental collapse.
  • Shield contains storage gimmick for Beam Sabers.
  • Suit designed by mechanical designer Hajime Katoki.
  • Scale pilot figures included.

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM107.90

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM162.00
RM162.00 Request Stock
Quick View
img
SAVERM77.10

MG 1/100 Wing Gundam Zero Custom (Pearl Ver.)

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

RM150.80
RM150.80 Request Stock
Quick View
img
SAVERM122.00

MG 1/100 00 QAN[T]


  • The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
  • Combination gimmick for the sword bits allows for a more accurate reproduction!
  • Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
  • The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
  • The pose with the Buster Sword armed looks great! Also comes with the Action Base
  • (Black) to display with!
  • Uses the GN Shield bits firing form as new mechanism.
  • Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
  • been reproduced with laser processing and foil sticker.
  • The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
  • creates a sense of machinery has been produced specifically for the development of MG.
  • Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
  • (standing/sitting), Action Base 2

RM171.50
RM171.50 Request Stock
Quick View
img
SAVERM91.30

MG 1/100 Char's Rick Dom

  • This particular version of the Rick-Dom never appears in any Gundam TV, only in the original novel as written by Gundam creator Tomino. Collectors love this stuff! Different color from the standard release, new weapons (Zaku Machinegun), and also includes an unpainted 1/20 Char figure, in military costume.

RM178.60
RM178.60 Request Stock
Quick View
img
SAVERM77.80

MG 1/100 MS-06F Zaku Minelayer

  • Mine dusting comes with backpack, detachable rack of mine in the cartridge type.
  • (Can be deformed in a way that Sowase to roll bar mine is linked on a consolidated structure)
  • Knee leg Unlike J type and the last (ground mercenaries do), attitude control rocket,
  • Change in space for type and propulsion rocket is added.
  • Poses flexible to the basic structure MG Zaku Ver.2.0.

RM170.10
RM170.10 Request Stock
Quick View
img
SAVERM120.90

MG 1/100 MSA-0011(Ext) Ex-S Gundam

  • Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  • But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  • But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  • Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!

RM320.00
RM320.00 Request Stock
Quick View
img
SAVERM217.21

MG 1/100 G Armor Real Type Color

  • - "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  • is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  • Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1

RM370.40
RM370.40 Request Stock
Quick View
img
SAVERM65.90

MG 1/100 RX-78-2 Gundam Ver.O.Y.W 0079 Animetion Color

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.


Wikipedia Information
The RX-78-2 Gundam(aka Gundam) is the titular mobile suit of Mobile Suit Gundam. Part of the RX-78 Gundam series, It was built in secret on Side 7, the Gundam would turn the tide of war in favor of the Earth Federation during the One Year War. The unit was primarily piloted by Amuro Ray.

The Gundam was incredibly advanced for its time. Built from lightweight Luna Titanium, its frame was both lighter than that of Zeon's mass-produced Mobile Suits and much sturdier, able to shrug off a Zaku's machine gun fire with little to no damage. Its offensive power was above and beyond that of the Zeon Zakus. The Gundam would engage in most battles with its Beam Rifle making it the first Mobile Suit to have firepower equivalent to a battleship beam cannon. In addition, it made use of two beam sabers, a blade of extremely hot plasma which could cut through any metal with ease. Those beam sabers could be extended into a spear-like beam javelin, which could be used to stab into an enemy from a longer distance than the blade of the saber would allow.

The Gundam also used more conventional weaponry: it could be launched with a Hyper Bazooka, the Federation's answer to the bazookas used by Zeon's Zakus; in addition, its head was outfitted with a pair of small vulcan cannons, providing it with a last resort weapon as well as a way of attacking light-armored aircraft and vehicles without wasting ammo or energy from its more powerful armaments. It also made use of a very unconventional close-range weapon known as the Gundam Hammer - a large weapon similar to a flail which could be swung at enemies to deal crushing damage.

The Gundam Hammer was eventually upgraded for use in space and outfitted with a number of verniers on the ball, and renamed to be the Hyper Hammer. Lastly, it wielded a large shield which would offer it a defense against enemy attacks that not even its Luna Titanium body could withstand without damage. Gundam pilot Amuro Ray would make use of the shield as a decoy in many battles, taking advantage of its size to fool the enemy into thinking he was charging at them, then attacking the enemy through the shield.

In terms of technology, the Gundam was equipped with a sophisticated Learning Computer which would collect pilot and enemy data during skirmishes and allow the Gundam to operate more effectively. The data from the computer was used by the Federation to improve the controls of the Gundam's mass-produced form, the RGM-79 GM. In addition, it was upgraded by Federation technician Mosque Han shortly before the Battle of A Boa Qu to improve its reaction times, the joints of the Gundam were given a Magnetic Coating, based on the experimental procedure performed on the RX-78-3 "G-3" Gundam and later used Amuro's intended successor unit, the RX-78NT-1 Gundam "Alex".

The Gundam makes use of the Core Block System implemented in the other V Project units. The torso of the Gundam is mostly hollow so that a FF-X7 Core Fighter can dock with it. This allows the pilot to jettison the legs and torso of the Gundam should the Gundam be too heavily damaged and gives the pilot a chance to escape from battle.

Later, during Operation Odessa, the Gundam is given a support unit known as the G-Fighter. The two G-Fighters were designed to take advantage of the Gundam's modular system and diversify the Gundam's role in active combat. These modes ranged from the assault bomber G-Armor to the close combat support tank G-Bull

Weapons
  • 60mm Gatling Cannons "Vulcan Gun"- The Vulcan cannons were 60mm Gatling Guns stored on the sides of the Gundam's head. Having the greatest rate of fire of all the Gundam's weapons these are primarily used to ward off advancing enemies, shoot down missiles, or hit other fast moving targets. They also made good use as an anti-aircraft and anti-personnel weapons. The Vulcan cannons however had a hard time piercing heavy armor (Though they had shown the ability to do severe damage to Mobile Suit's if fired at point-blank range)and thus were not often used against larger, more heavily armored foes. Still the Vulcans were useful in preserving ammunition for the Gundam's more powerful weapons such as the Beam Rifle.
  • BAUVA*XBR-M-79-07G (Bauva eXperimental Beam Rifle Medium-range) - A revolutionary weapon for it's time, the Beam Rifle is the primary weapon used by the Gundam. Making use of the Federations E-cap (or "energy capacitor") technology, the rifle uses charged concentrations of Minovsky particles as ammunition. This gives the beam rifle firepower equivalent to that of a battleship's beam cannons. As the Minovsky particles destroy matter on a molecular scale, the beam rifle can penetrate even the thickest armor and destroy its target with a single shot. One weak point of the rifle was its energy limits. The rifle could only be fired 16 times before depleting its energy and becoming useless.
  • Beam Saber- The Gundam was the first mobile suit to ever use a beam-oriented weapon in melee combat. The sabers are stored on the backpack, and can transform from saber to the Gundam Javelin, a large pole with a three pronged beam at the end. The beam sabers use Minovsky particles held in place by an I-Field to form an effective cutting surface that can slice through nearly any material. The particles for the beam sabers are stored by E-cap in the hilt of the saber, which is recharged from the Gundam's reactor when the saber is returned to its socket. Once activated, beam sabers do not rely on the mobile suit's reactor and can be thrown or discarded as decoys. The beam saber is most often used for close range combat or as an emergency weapon once all other ammunition has been depleted.
  • Gundam Hammer/Hyper Hammer - A rather unusual weapon, the Gundam Hammer was essentially a large spiked ball attached to a chain. It was used to give the Gundam a ranged melee weapon. The Gundam could either throw or swing the Hammer around itself in order to impact and damage its target through the sheer mass of the hammer. Later, it was upgraded into the Hyper Hammer and had several rockets mounted into the ball in order to give it use in space allowing it to maneuver in zero-gravity also the ability to change it's direction before impact, and to increase the damage it could cause.
  • BLASH*XHB-L-03/N-STD (Blash eXperimental Hyper Bazooka Long-range) - Similar to the Zaku's Bazooka, the Hyper Bazooka was a heavy weapon used by the Gundam. Technically a large rocket launcher it could fire several 380mm missiles to attack targets at long range. While very powerful the Hyper Bazooka had a slow rate of fire and fairly little of ammunition. Most oftenly used to take out slow, heavily armored targets.
  • RX*M-Sh-008/S-01025 (Renpou [Federation] eXperimental Medium Shield) - Hand-carried, forearm-mounted or stored on the Gundam's backpack, the shield is a simple defense used to block most incoming ballistic and explosive projectiles. Also used to great effect in close quarters battle with enemy mobile suits. Has a view port than can be sealed off with an internal blast plate. The shield is also used to deflect heat away from the mobile suit when undergoing atmospheric re-entry.
  • Core Block System - The initial idea of the Core Fighter was as a form of escape if the Gundam were to be destroyed, allowing the irreplaceable data collected by the learning computer and the pilot to escape from a replaceable machine. Another idea was that the Core Fighter could be launched into the field as a support fighter, and the A and B blocks could be delivered by another vehicle (the Federation developed a support unit, the Gunperry, for this role) if needed for a mid-air conversion into a mobile suit.
  • Learning Computer System - A critical component of the Gundam's success in combat, the Learning Computer System was similar to a modern day black box. It recorded the data from each of the Gundam's battles for further use. However, the system could also actively learn and improve the capabilities of the Gundam, explaining why Amuro had such difficulty fighting two Zaku IIs on his first try but managed to hold off ace pilot Char Aznable at Luna II.
  • Re-entry Coolant System - The re-entry system is used for only emergencies when the Gundam is falling to Earth and has no chance of reaching its carrier. The coolant system acts as a large heat-resistant film which lowers the Gundam's temperature when descending to Earth.

RM126.00
RM126.00 Request Stock
Quick View
img
SAVERM57.40

MG 1/100 RX-78-3 G-3 Gundam

  • Bandai's Master Grade (MG) "RX-78-3" is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980 (the original kit is still available, by the way. 700 yen). 
  •  Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. Panels on the legs flip open to reveal internal mechanisms. The head has a panel, too. 
  • Even the "Core Fighter" cockpit ship can be removed from its belly. Fine mesh parts cover the inside of the chest air intakes for added realism. Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit. All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  • Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  • The RX-78-3 kit is identical to the RX-78-2 except that it is molded in blue and gray plastic, rather than the more "festive" colors of the original.

RM92.50
RM92.50 Request Stock
Quick View
img
SAVERM69.90

MG 1/100 MS-06J Zaku II Ver.2.0 (w/clear parts)

Over a decade since the first MG Zaku II kit release and several MG Zaku II variations later, this Zeon MS finally gets the "Ver. 2.0" treatment with a completely revamped inner frame construction that allows for even greater range of articulation and realistic movements--you can even pose it kneeling on one leg as seen in the show! Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. Weapons include a Zaku machine gun, Zaku bazooka, heat hawk, and a pair of three-tube missile pods. Two types of blade antennas are thoughtfully included if you plan on building a Zaku II commander mass production type MS, plus two 1/100-scale pilot figures are also provided to man the MS. An incredible kit that's not to be missed!

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM99.90

MG 1/100 Master Gundam (Hyper Mode)

  • Hyper Mode Master Gundam (MG)

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM54.90

MG 1/100 MS-14S Gelgoog (One Year War 0079 Ver.)

  • Gelgoog One Year War EDITION!!
  • Accesories: Beam Rifle x1, Beam Naginata x1, Shield x1
  • Item Size/Weight : 33.3 x 24.2 x 12.4 cm / 678g

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM97.60

P-Bandai Exclusive: MG 1/100 Heavyarm Gundam EW (Reissue)

Second batch is open for Pre-order.

Estimated delivery: Jan, 2018

The long waited Gundam W Endless Waltz gunpla!
Comes armed: double gatling gun
This is prepainted plastic model kits, require simple snap-fit assembly only. .

RM302.40
RM302.40 Request Stock
Quick View
img
SAVERM163.70

P-Bandai Exclusive: MG 1/100 MSN-06R-2 Zaku II (Robert Gilliam Custom)

  • P-Bandai Exclusive: 1/100 MSN-06R-2 Zaku II (Robert GIlliam Custom)

RM236.30
RM236.30 Request Stock
Quick View
img
SAVERM163.70

P-Bandai Exclusive: MG 1/100 MS-06R-2 ZAKU II (GABBY HAZARD’S CUSTOM)

  • P-Bandai Exclusive: 1/100 MS-06R-2 ZAKU II (GABBY HAZARD’S CUSTOM)

RM236.30
RM236.30 Request Stock
Quick View
img
SAVERM71.70

P-Bandai Exclusive: MG 1/100 RX-93 Nu Gundam Ver.Ka HWS

The set contains: Chest armor unit / front armor armor unit / leg armor and thruster unit / shoulder missile launcher /Hyper-Mega-Shield / Hyper-Mega-rifle / "Ver.Ka" water transfer decal
This is pre-painted plastic model kits and require snap-fit assembly only.

RM491.40
RM491.40 Request Stock
Quick View
img
SAVERM91.60

MG 1/100 AMX-004-3 Qubeley MK-II (Ple-Two Custom)

  • - Careful color reproduction allows for accurate color separation! 
  • - Features non-scale Ple-Two figure.
  • - Includes Beam Saber in converged and tri-pronged styles.
  • - Decals inspired by Ple-Two.

RM148.00
RM148.00 Request Stock
Quick View
img
SAVERM268.80

MG 1/100 Unicorn Gundam (Red / Green Frame Twin Frame Edition) Titanium Finish

  • [Mobile Suit Gundam Unicorn RE: 0096] complete commemorative items
  • Unicorn of titanium finish +2 kind of clear parts selection formula special specification Gundam!
  • It appeared in the luxury titanium finish specification !!
  • Psycho frame red or green selection formula !!
  • Backpack or foot portion is reproduced in blue plating specification.
  • Accessories: shield, beam Magnum, beam saber × 2, hyper bazooka

RM450.00
RM450.00 Request Stock
Quick View
img
SAVERM92.90

P-Bandai Exclusive: MG 1/100 Marasai (Unicorn Ver.)

  • P-Bandai Exclusive: 1/100 Marasai (Unicorn Ver.)

RM307.10
RM307.10 Request Stock
Quick View
img
SAVERM203.10

P-Bandai Exclusive: 1/100 Unicorn Gundam Unit 02 Banshee Norn (MG)

P-Bandai Exclusive: 1/100 Unicorn Gundam Unit 02 Banshee Norn


REISSUE ITEM

Release date : Dec, 2017
Estimate delivery : Jan, 2018

RM396.90
RM396.90 Request Stock
Quick View
img
SAVERM154.70

MG 1/100 Providence Gundam (Premium Edition)

MG 1/100 Providence Gundam [Limited Edition]

Includes ZAFT Action Base

The Providence Gundam, the God who bears the noise of Thunder on his back, has now launched in the MG line-up! this version is an special set exclusive to the initial production! the special set includes a zaft-mark display stand and exclusive decals. The decals are special water-transfer decals from the MG seed series all together on a single sheet. The Providence Gundam shares its genealogy with the freedom Gundam and utilizes some of the same frame parts incorporating a highly dynamic joint structure and balanced proportion. Its distinctive rear-mounted dragoon pods can be equipped and displayed with clear struts to recreate its all-range attacks. Several gimmicks such as ankle extensions, movable cockpit, and the deployment of the composite armed shield system to the MS's left arm provide enhanced realism and enjoyment. Set includes judicium beam rifle x1, composite armed shield system x1, dragoon launch recreation struts x5, clenched hand (left and right), open hand (left and right), gun-wielding hang (right), open-hole clenched hand (left and right), saber effect x1, and zaft-mark display stand x1. Runner x17. Dry sticker x1. Tetron sticker x1. Foil sticker x1. Exclusive water-transfer decal x1. Instruction manual x1.

RM264.60
RM264.60 Request Stock
Quick View
img
SAVERM119.40

P-Bandai Exclusive: MG 1/100 RMS-179 GM II

P-Bandai Exclusive: 1/100 RMS-179 GM II

RM179.60
RM179.60 Request Stock
Quick View
img
SAVERM35.40

P-Bandai Exclusive: MG 1/100 GM Cannon [North America Front Line Spec]

P-Bandai Exclusive: MG 1/100 GM Cannon [North America Front Line Spec]

  • Estimate Arrival : Early July 2017
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM264.60
RM264.60 Request Stock
Quick View
img
SAVERM21.20

P-Bandai Exclusive: MG 1/100 Gundam Astray Red Frame

P-Bandai Exclusive: 1/100 Gundam Astray Red Frame

RM278.80
RM278.80 Request Stock
Quick View
img
SAVERM134.50

MG 1/100 Providence Gundam

MG 1/100 Providence Gundam

  • This is a Model Kit, Assembly Needed
  • Plastic is Pre-Painted no paint requires.
  • Comes with 
  • Yudikiumu beam rifle × 1
    And multifunction soldiers Sobotate system × 1
    - Dragoon injection for reproduction strut × 5
    - Grip hand (left and right) × 1 each
    - Open hand (left and right) × 1 each
    - Gun possession (right) × 1
    - Perforated grip hand (left and right) × 1 each
    Saber effect × 1
    Exhibition pedestal × 1

RM189.00
RM189.00 Request Stock
Quick View
img
SAVERM123.80

MG 1/100 RX-78-2 Gundam The Origin (Special Edition)

MG 1/100 RX-78-2 Gundam The Origin [Special Edition]


[ACCESSORIES]

  • LED unit [pink / yellow] 
  • Early type beam rifle x 1
  • Late type beam rifle x 1
  • Hyper bazooka x 1 
  • Beam saber x 2
  • Shoulder cannon x 1
  • Effect parts

RM211.60
RM211.60 Request Stock
Quick View
img
SAVERM25.90

P-Bandai Exclusive: MG 1/100 RX-78-1 Prototype Gundam

P-Bandai Exclusive: MG 1/100 RX-78-1 Prototype Gundam

  • Estimate Arrival : Early June 2017
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM274.10
RM274.10 Request Stock
Quick View
img
SAVERM110.00

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM390.00
RM390.00 Request Stock

Showing 361 - 390 of 454 products