- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

MS-14S Gelgoog Char Custom Ver.2.0

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

RX-178 Gundam Mk-II (MG) A.E.U.G. Color

• The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  
• Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  
• The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  
• Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model.
  

RX-178 Gundam Mk-II Titans

Here's another variation of Bandai's best-selling Master Grade Zaku kit. This version is based on the version originally seen in the "M.S.V." (Mobile Suit Variation) series. Besides the coloring, there are quite a few detail differences in the lower leg parts, weapons and markings of this Zaku. Weapons include the Giant Bazooka Prototype, standard Bazooka, "Heat Hawk" axe, and the sub-machine gun. This kit also comes with a figure of the pilot "Mush" (great name). Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. The pipes running from the thighs to the calves, as well as around the sides of the head, are flexible springs covered with plastic tubes. The head has a panel that opens, and a small tab on the back of the head lets you position the Zaku's scanner eye. Three types of hands are included: open palm, fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paint will improve the appearance of a finished model.

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

• Mechanism of Zion threat. 
  
• The development story connected from mass production Zac to Gelgg is reproduced with the MG kit.
  
• Zac MS-06R of "Singh Matsnaga" specification of high mobile type Zac is made a kit by using the basic structure of Zac Ver.2.0 of the inner frame enhancement reproduction. The detail shape such as the leg, the shoulder, the shoulder armors, and forearms changes from MS-06R. 
  
• The Zac machine-gun, the Zac bazooka, the cartridge magazine in addition to the heat fork, and parts for the experimental bazooka modification are attached.
  

• Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden's custom Zaku II is added to the Zeon Master Grade lineup! 
  
• Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
• -  Monoeye -   camera movement gimmick allows for eye position to be changed.
• Separable spike elements set this kit apart from your standard Zaku. 
• Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
• Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
• Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

MG Freedom Gundam (Extra-Finish Edition)

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

• MG FA-010S Full Armor ZZ Gundam
  

• MG RX-78-2 Gundam (Ver.1.5)
  
• This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  
• Upgrade product of the master's first grade! !
  

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam
  

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! This incredibly detailed and beautiful kit of Gundam F91 from the Mobile Suit Gundam F91 anime movie is stunningly reproduced in 1/100 scale Master Grade kit format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. Also included in this kit is the top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

• The first 5 [G] Hebiamuzu appearance! 
  
• Flexible movement on it's posture, with BIG ARM weapon - Accessories: Shield, beam gatling, army k-nife, concealed arms (saber charged)