• Home
  • Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

Showing 151 - 180 of 456 products

Quick View
img
SAVERM79.90

MG 1/100 God Gundam (Hyper Mode)

Beautiful Master Grade version of the God Gundam, in 'Hyper Mode'. The base is Bandai's super flexible, super poseable 'Action Frame', put together with some snap-fit pieces, some screws, bolts, polycaps for joints, and some wire (Master Grade kits are much more complex than regular plastic kits) over which the armor is layered. The finished product can take on infinite 'realistic' poses as seen in the anime. Parts are gold-plated for that Hyper Mode gleam! Some stickers for detail are included, as well as a plastic 'jewel' for the Hyper Mode unit. Also included is a translucent orange plastic figure of Domon Kyasshu!

RM190.00
RM190.00 Request Stock
Quick View
img
SAVERM67.90

MG 1/100 MS-06J Zaku II Ver.2.0 (WHITE OGRE)

  • MS Igloo 2: Gravity Front’s very own Captain Elmer Snell’s ‘White Ogre' Zaku in Master Grade form!
  • Molded in anime-accurate colors and featuring decals that bring out the White Ogre’s unique aesthetic! 
  • Equipped with a spare magazine for the Bazooka, held at the waist.
  • Accessories: Zaku machine gun, Zaku Bazooka, Heat Hawk.

RM142.00
RM142.00 Request Stock
Quick View
img
SAVERM64.90

MG 1/100 MSZ-006A1 Zeta Plus Test Color Type

  • Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  • Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  • This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  • Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  • This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  • Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  • Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  • Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  •  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  • Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  • Transformation capability. 
  • Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  • Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  •  Weight: 612g

RM115.00
RM115.00 Request Stock
Quick View
img
SAVERM130.40

MG 1/100 GN-001 Gundam Exia (Ignition Mode)

  • A deluxe upgrade to the already advanced Exia master Grade!
  • 01: An upgraded look for a fan-favorite Mobile Suit!
  • Exia Repair parts (with soft, textured cape) and Ignition Mode parts included to select either look
  • 02: Weaponry for both Ignition and Repair included!
  • Repair Mode features the broken, dulled GN Sword, while Ignition Mode includes all of the Exia’s GN Swords are chrome-plated, and the kit retains the Master Grade Exia’s GN Sword folding gimmick! 
  • 03: LED Units included for Ignition Mode!
  • Completely recreate the glowing GN Drive! Shining with the LED gimmick, the Exia’s chest and rear GN Drives light up for a totally dynamic appearance!
  • 04: GN Code accurately recreated!
  • The GN code that runs through the body is recreated in translucent green material and accentuated with decals to keep the details anime-accurate! 
  • 05: Display the GN Drive for maintenance! 
  • Display Stand with build arm is included to display the GN Drive in maintenance mode! 
  • Accessories: GN Sword x1, GN Sword Repair x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2, GN Beam Saber x2, 1 / 100 Pilot Figure (Sitting, Standing)

RM227.50
RM227.50 Request Stock
Quick View
img
SAVERM52.00

[Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)

MG 1/100 Nataku/ Altron Gundam from Super Nova (Blue Version)


- MG 1/100 Altron (Blue Version)
- From Super Nova
- Pre-painted plastic, no paint required.
- Self assembly required

Kindly note that this kit is a NON-BANDAI product.

RM148.00
RM148.00 Request Stock
Quick View
img
SAVERM115.90

P-Bandai: MG 1/100 Zaku Cannon [Ian Graden Custom]

P-Bandai: MG 1/100 Zaku Cannon [Ian Graden Custom]

Release Date: July, 2018
Estimate Delivery: August, 2018

RM274.10
RM274.10 Request Stock
Quick View
img
SAVERM55.00

P-Bandai: MG 1/100 G Parts [Hrududu]

P-Bandai: MG 1/100 G Parts [Hrududu] 

Release Date: July, 2018
Estimate Date Delivery: August 2018

Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM135.00
RM135.00 Request Stock
Quick View
img
SAVERM30.00

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts


Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM187.90

MG 1/100 RX-93 Nu Gundam (Metallic Coating Version)

Special metallic chromed finish version of the MG Nu Gudam. Amuro's custom made Gundam from the movie "Mobile Suit Gundam: Char's Counterattack" joins the MG lineup. All-new assembly system allows certain parts to be detached and re-attached. New poly caps allow for enhanced possibility. 


Accessories:
- Beam rifle
- Beam saber x 2
- Shield
- Hyper bazooka
- Funnel system.

RM321.30
RM321.30 Request Stock
Quick View
img
SAVERM109.60

MG 1/100 Jegan

MG 1/100 Jegan


Following the silhouette balance that appeared in "Char's Counter Attack", reproduced Jegan with a sense of stability a lot. - Adopt MS internal frame of completely new modeling. It can be reproduced simply by assembling the inner skeleton symbolizing mass production machine. - Hand parts of four kinds on the left and right are included. Reproducible from the pose that sets the rifle to the name scene that captures the Axis. 

Accessories:
- Beam rifle x 1 
- Beam . saber x 1 
- Shield x 1 [Product content] 

Product Content:
- Molded article x 17 
- Foil seal x 1 
- Marking stick x 1 
- Instruction manual x 1

RM154.00
RM154.00 Request Stock
Quick View
img
SAVERM50.00

[Daban] MG 1/100 Freedom Gundam Ver.2.0

Daban MG 1/100 Freedom Gundam Ver.2.0


Scale : 1/100
Brand : Daban
Grade : Master Grade

Please note that this is NOT Bandai item

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM129.40

MG 1/100 00 QAN[T] / Quanta Full Saber

MG 1/100 00 QAN[T] FULL SABER

- Faithfully reproduce the body shape of Double O Quanta Full Saber!
- Armor equipped with a variety of mechanisms `GN Sword IV Full Saber` is reproduced with new parts.
- The GN capacitor is mounted and the back part with the connection part with GN sword IV is reproduced by new modeling.
- A head antenna that imaged visuals drawn by Mr. Ebi Ogawa Kan Attack comes with new modeling.
- Marking seals are included, including markings for GN Sword IV Full Saber.
- Base for GN sword IV is included.

[accessories]
- GN Sword IV x 1
- GN Gamblade x 3
- GN sword V x 1
- GN sword bit
- GN shield x 1
- Display arm for arms x 1

[Product content]
- Molded article x 23
- Marking seal x 1
- Foil seal x 1
- Dry decal x 1
- Instruction manual x 1

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM46.00

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf


- This is a Non-Bandai product.
- Master Grade 1/100 Scale.
- Included launching action base and water decal.
- Transformable kits.

The MSZ-006-3B Zeta Gundam 3B Type (also "Gray Zeta") is a variant of the MSZ-006 Zeta Gundam piloted by former Zeon ace Shin Matsunaga (codename "Gray Wolf"), who calls it "Buster", and appears in the Gundam Evolve 9 CGI episode where it engages in battle with the QRX-006 Geminus, assisted by two other Zeta units.

RM99.00
RM99.00 Request Stock
Quick View
img
SAVERM10.00

P-Bandai: MG 1/100 Gundam Storm Bringer

P-Bandai: MG 1/100 Gundam Storm Bringer

Release Date: October, 2018

This new custom Gundam will be in the upcoming Gundam Build Divers spin-off under the title Gundam Build Divers GBWC Gimm and Ball's World Challenge.

RM310.00
RM310.00 Request Stock
Quick View
img
SAVERM40.00

Event Limited: MG 1/100 Full Armor Gundam Ver.Ka (Half Mechanical CLear Ver.)

Limited Edition Half Mechanical Clear Plastic Kit from Bandai featuring Full Armor Gundam from Gundam Thunderbolt Series. This a genuine 1/100 MG Master Grade with semi-translucent armor. The kit is designed by Hajime Katoki, Bandai gives this kit an additional special touch with a Half Mechanical Clear color scheme.

RM480.00
RM480.00 Request Stock
Quick View
img
SAVERM50.00

Daban 8809 MG 1/100 (Cannon) Blast Impulse

Daban Gundam Blast Cannon Impulse 


Brand: Daban MG 1/100 Ready stock
Code : 8809
Scale : 1/100
Grade : Master Grade

Please note that this is not Bandai products

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM41.00

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam


- MG 1/100 Heavyarms Custom 
- From Super Nova
- Pre-painted plastic, no paint required.
- Self assembly required

Set contains:
- 2 joker mask
- 4 Gatling guns
- Gatling gun holder

Weapon Holder is not included.

Kindly note that this kit is a NON-BANDAI product.

RM159.00
RM159.00 Request Stock
Quick View
img
SAVERM215.00

P-Bandai : MG 1/100 Freedom Gundam Ver.2.0 Full Burst Mode Special Coating Ver.

--- Reproducing with the spatial specifications Full-burst! - -

Body, effect, decal, limited color base etc,

All were coordinated with special specifications, MG 1/100 Freedom Gundam Ver.2.0 Deluxe Edition! !

-  — COATING
The white exterior of the main body MS is subjected to white plating, a luxurious finish full of metal feeling!


-  — METALIC
Metallic molding color is adopted for the navy, blue, red parts of main body MS!

-  — EFFECT
An effect that reproduces the full burst mode in the play. It comes with a limited color of lamqueria molding.
Three kinds of shapes full of dynamism. Total 5 (3 kinds).

-  — DECAL
Silver - Foil, using a red foil Glossy finished special version water transfer decal!
"Gunpla Builders World Cup 2013" world marker -  · Shiki Yamauchi's marking design included! !

-  — ACTION BASE
A special stand that can be adjusted for angle, indispensable for full burst mode display, comes with limited color of navy clear.

【Product Description】

* MG 1/100 Freedom Gundam Ver.2.0 Special Coating Specification
* Cannon cannon effect (Lame Clear Red x— 2)
* Lower rail artillery effect (Lame clear yellow x— 2)
* Beam rifle effect (Lame Clear Green x— 1)
* Water Transfer Decal Special Edition
* Stand (Navy Clear)

RM535.00
RM535.00 Request Stock
Quick View
img
SAVERM215.00

P-Bandai : MG 1/100 Perfect Strike Gundam Special Coating Ver.

P-Bandai: MG 1/100 Perfect Strike Gundam Special Coating ver. [REISSUE]


RM535.00
RM535.00 Request Stock
Quick View
img
SAVERM10.00

P-BANDAI: MG 1/100 Gundam Barbatos Expansion Set

Note : This item only the Expansion Set, MG 1/100 Gundam Barbatos Kit is NOT INCLUDED
 
Premium Bandai has finally announced the release of expansion for the MG Gundam Barbatos! The kit is provided with completely new molded parts for the Gundam Barbatos forms 1 through 6! The kit also has a 1/100 scale Tekkadan Mobile Worker, provided with amazing detailing and multiple part separation. Also a 1/100 scale Orga Itsuka is also included!

Kit also comes with waterslide decal sheet for detailing!

RM240.00
RM240.00 Request Stock
Quick View
img
SAVERM96.60

P-Bandai: MG 1/100 Gundam F90 Mission Pack O and U Expansion Set

  • P-Bandai: MG 1/100 Gundam F90 Mission Pack O and U Expansion Set
  • MG 1/100 Gundam F90 model kits sold SEPARATELY
  • The Mobile Suit Gundam F90 A~Z project continues with the mission packs O (Officer) and U (Uplift)! These are expansion packs for the sold separately MG 1/100 Gundam F90. The kit is provided with entirely new molded parts for both mission packs.
  • The kit also comes with water slide decals for detailing!

RM155.00
RM155.00 Request Stock
Quick View
img
SAVERM10.00

Daban 6622R MG 1/100 OOQ 00 Qan[T] Gundam Quanta Limited Red Ver. (with Water Decal)

[Daban] MG 1/100 Gundam 00 Qan[T] (China Red Version)

Series: Gundam 00
Grade: Master Grade (MG)
Manufacturer: Daban
Scale: 1/100
Version: China Red Special Version

RM108.00
RM108.00 Request Stock
Quick View
img
SAVERM5.00

Daban 6643 MG 1/100 Unicorn Banshee Norn 02 Final Battle Ver. Full Psycho Frame Model Kit

Daban 6643 MG 1/100 Unicorn Banshee Norn 02 Final Battle Ver. Full Psycho Frame Model Kit

Brand : Daban
Grade : Master Grade
Scale : 1/100
Model : Unicorn Banshee Norn 02 Final Battle Ver. 

Please note that this is Not Bandai product

RM95.00
RM95.00 Request Stock
Quick View
img
SAVERM79.60

SNAA Model (Super Nova) MG 1/100 Hunt and Kill Air Combat enhanced weapon Mobile Armor XH-01 Gundam

[Product Overview]
- Brand : SNAA a.k.a Supernova
- Type : Plastic Model Kit
- Size : 20cm (Approx.)
- Scale : 1/100 
- Grade : Master Grade

[Product Content]
- MG Scale Main Body x1
- Water Decal x 1set
- Dedicated Action Base x 1 (Support Fin Funnel Effect)
- Fin Funnel Effect x 1set

Please note that this is NOT BANDAI products

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM10.00

ZZA Model Blue Flame Model Kit with die cast Alloy Inner Frame

ZZA Model 1/100 Blue Frame

Product Height : 19cm
Include Water Decal
Include Alloy Metal skeleton frame

First Batch Bonus:
Bonus 1 :  A pair of alloy knife handles
Bonus 2 : Stand base
Bonus 3 : Three-color interchangeable outer armor 
Bonus 4 : Blue flame pattern special effects parts

 

RM320.00
RM320.00 Request Stock
Quick View
img
SAVERM87.60

MG 1/100 PF-78-1 Perfect Gundam

Product include : 


Perfect Gundam 
- Main body
- 2 Beam Sabers
Perfect Gundam Armor parts
- 2-barrel Hand Beam Gun
- Shoulder Cannon
Shield
- 1 Beam Saber (1 out of 3)
- 4 removable mines
- 1/20 Shiro Kyoda figurine

Articulation
  • Manipulators feature 3+1+1 articulation on each finger.
  • The head can swivel via a ball-and-socket joint neck.
  • Shoulder joints can be slightly pulled out for 120 degrees upward articulation.
  • The shoulders can raise horizontally.
  • The upper elbows can turn.
  • Elbow joints can bend 120 degrees.
  • The ball-and-socket waist can turn 360 degrees. (The articulation can be hindered if the Perfect Gundam armor parts are mounted on)
  • Front, side, and rear skirt armors can pivot to avoid interference with the leg articulation.
  • The knee joints can be bent into 100 degrees.
  • The ankles are a double-sided joint.
  • Any of the included weapons can be wielded by the articulated hands.
  • The central panel can be flipped up to reveal an inner cockpit.
  • Shoulder cannon can pivot up and down.
  • The mines (4 pieces) can be optionally removed from the shield. 
  • The shield can store up to 3 Beam Sabers.
  • Beam Saber hilts can also be optionally removed as handheld weapons.
  • Perfect Gundam Armor parts can be removed to reveal RX-78-2 Gundam.
  • - RX-78-2 Gundam's front pelvis and knee armor panels can be flipped out to reveal mounting points for the Armor pieces.
  • - The Beam Saber racks can be closed shut into the backpack if one wants to attach the Perfect Gundam's backpack.

RM176.00
RM176.00 Request Stock
Quick View
img
SAVERM81.60

SNAA Model (Super Nova) MG 1/100 Hunt and Kill Air Combat enhanced weapon Hunter Falcon Mobile Armor XH-01 Gundam

[Product Overview]
- Brand : SNAA a.k.a Supernova
- Type : Plastic Model Kit
- Size : 20cm (Approx.)
- Scale : 1/100 
- Grade : Master Grade

[Product Content]
- MG Scale Main Body x1
- Water Decal x 1set
- Dedicated Action Base x 1 (Support Fin Funnel Effect)
- Fin Funnel Effect x 1set

Please note that this is NOT BANDAI products

RM158.00
RM158.00 Request Stock
Quick View
img
SAVERM15.00

DABAN 6628 MG 1/100 RX-78/C.A. VER 3.0 Casval Gundam

DABAN 6628 MG 1/100 RX-78/C.A. VER 3.0 Casval Ver.

Brand : Daban
Code : 6628 (Casval Ver.)
Grade : MG
Scale : 1/100
Water Decal is included

Please note that this is not Bandai product

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM139.40

Daban 6631A MG 1/100 Sazabi Ver. Ka Clear Version

  • Brand : Daban 
  • Scale : 1/100
  • MG1/100 Sazabi Ver. Ka
  • Clear Version
  • Manual booklet
  • Water decal
  • LED x 1
  • Excluded stand
Please note that this is non-Bandai products

RM190.00
RM190.00 Request Stock
Quick View
img
SAVERM30.00

P-Bandai: MG 1/100 Gundam Ex Impulse

P-Bandai: MG 1/100 Gundam Ex Impluse

RM420.00
RM420.00 Request Stock

Showing 151 - 180 of 456 products