• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box.

• Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
• Both frame and armor are completely rescupted with revised proportions! 
• It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
• Its wing and beam cannons flex for full burst mode, as well. 
• A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

• Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  
• Uses the XXX-G Frame developed during the animation!
  
• Marking work is designed by Hajime Katoki.
  
• Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  
• New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  
• Able to reproduce the flapping from the animation naturally. 
  
• The closed state of the Active Cloak can also be reproduced with a natural form. 
  
• Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 
  

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

• ZGok Char customise with shining Red ver!
  
• The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series.
  
• The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws
  

• Built for heavy-duty combat, the Buster Gundam is an artillery unit specializing in long-range assault! 
• Characterised by its two massive cannons, the Buster Gundam's iconic look has been redesigned for maximum detail, and it's SEED-specific X100 frame gives it outstanding maneuverability!
• Full of arms-specific gimmicks! 
• Recreate the massive Hyper Impulse Long-Range Sniper Rifle by docking the two smaller weapons together! 
• Gun barrel equipped with pump-action gimmick for realistic action.
• The dual sub-arms are equipped with a movement gimmick and can hold the huge weapons for dynamic firing poses.
• Shoulder-mounted missile hatches open.
• One of the five Gundams built under the Earth Alliance's G Project, the GAT-X103 Buster Gundam was created on the versatile X100 Frame, and designed to overwhelm any gunfight with its massive firepower.
• Accessories: 350mm Gun Launcher, 94mm High-Energy Rifle,
• Fist (Left and Right), Open Palm (Left and Right)

• Fully transformable AGE Master Grade: The Dark Hound!
• Complete transformation to flight form!
• In addition to each weapon, a variety of manipulator parts are included.
• Using an Action Base (sold separately) enables easy and accurate aerial posing.
• Piloted by Bishidian Pirate Captain Ash, the Dark Hound is a repaired and renovated Gundam AGE-2 Normal.
• Accessories: DODS Lancer, Anchor Shot x2, Beam Saber x2, Pilot Figure (Sitting, 

• Weapon Accessories: rifle, saber, shield, beam shield, Grapple Stinger. 
  
• Effects included: Saber, Blade Beam (leg, wing), beam boomerang, beam Shielding.
  
• Figures included: Athrun Zala of 1 / 100 size (for cockpit, standing postures).
  
• Action base is not included

MG 1/100 RMS-099 Rick Dias

• From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  
• Double hip joints allow wide, sweeping range of motion in the hips. 
  
• LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  
• Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  
• Includes MQuve figure in 1/100 scale and 1/20 scale.
  
• Accessories: Beam Sword x1, Shield x1
  

• MSM-03 Gogg (MG)

[Daban] 1/100 Jesta (MG) Clear Version

- MG to colony battle specification of Jim . command which appeared in [Mobile Suit Gundam 0080 war in the pocket].

- Reproduction of a characteristic colony-style school bag with a new modeling.
- Reproduce the distinctive airframe shape of Jim . Command with new modeling conforming to MG.
- Smooth movement of the lumbar region, realizing a range of motion close to the human body such as arms and legs, enabling various poses in a wide range of motion.
- Weapons such as bull pupp machine guns are included.

- accessories
* Bull pupp machine gun x 1
* Beam . saber x 2
* Shield x 1 . Magazine x 2

- Product content
* Molded article x 18
* Seal x 1
* Marking stick x 1
* Instruction manual x 1

[Daban] 6648 MG 1/100 Hyaku Shiki

A new refined version of the MG Gun dam F91 as part of the GunPla Evolution project, from the animated movie “Gun dam F91”!  Careful research has been conducted to recreate not only the physical appearance but also its various action gimmicks including an LED housing in the chest backpack assembly (BAN217846 White LED sold separately) for representing the heat dissipation that generates the Metal Peel-off Effect (MPE) in the anime.  The F91’s face open gimmick is now correctly implemented and can split open to the sides or displayed with a solid piece. Shoulder fins and leg thrusters have a new deployment mechanism allowing for various angle adjustments. Display it together with BAN225768 RE-100 Vigna Ghina!

MG 1/100 Gundam Avalanche Exia

Daban 8822 1/100 OOQ 00 Qan[T] Gundam Quanta MB Ver.Brand: DabanCountry of production: China
Package Content

• ABS Plastic model pla plate
• Action Base included
• Water Decal included
• LED light and battery included
• Not included manual book. (Need to download manual )