Price Clear







Gundam Model Kits

Showing 1 - 30 of 61 products

img
SAVERM319.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM580.00
RM580.00 Add to cart
img
SAVERM314.90

PG 1/60 RX-178 Gundam MK-II (A.E.U.G)

  • An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  • Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  • Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  • Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  • Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.

RM585.00
RM585.00 Add to cart
img
SAVERM380.90

PG 1/60 Gundam Astray Red Frame

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

RM699.00
RM699.00 Add to cart
img
SAVERM404.90

PG 1/60 Strike Rouge + Sky Grasper

Superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits. A whopping number of parts are included in the typically-large (and heavy!) box. Besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.

RM735.00
RM735.00 Add to cart
img
SAVERM180.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM480.00
RM480.00 Add to cart
img
SAVERM280.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM820.00
RM820.00 Add to cart
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn Fighter

[Daban] 1/60 Gundam Unicorn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM350.00
RM350.00 Add to cart
img
SAVERM100.00

DABAN PG 1/60 UNLEASHED RX-78-3 G3

DABAN PG 1/60 UNLEASHED RX-78-3 G3

Brand : Daban
Grade : PG
Scale : 1/60
Series : Mobile Suit Gundam
Box Size : 62.5×40×13cm

Please note that this is NOT Bandai product

RM480.00
RM480.00 Add to cart
img
SAVERM130.00

DABAN PG 1/60 UNLEASHED RX-78-2

Daban PG Gundam Unleashed RX-78-2 Model Kit

Brand : Daban
Grade : PG
Scale : 1/60
Series : Mobile Suit Gundam
Material : ABS
Box Size : 62.5×40×13cm

Includes :
- Body Kits
- Water Slides
- Others Accessories

Please note that this is NOT Bandai product


RM420.00
RM420.00 Add to cart
img
SAVERM0.00

[Daban] PG 1/60 RX-0 Unicorn Gundam (Final Battle Ver.)

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60
Model: Final Battle Version 

Included components

* Special : Metallic Green Psycho Frame & Clear Green Psycho Frame (1each)

* Main Body x1

* Shield x3 (Final Battle)

* Beam Magnum x1

* Beam Magnum backup cartridge x1

* Beam gatling gun x2

* Beam saber x4

* Beam bazooka x1

* Display base

* Detron stickers for all markings


Please note  that this is Not-Bandai product

RM450.00
img
SAVERM477.70

PG 1/60 Gundam Astray Red Frame Kai

P-Bandai: PG 1/60 Gundam Astray Red Frame Kai

Great news guys!!! The item that sold under P-Bandai in Non-Asia Countries is now released as the regular Bandai product in Asia Countries!!! Make sure you don't miss out this great opportunity to get this big guy home!!!


Accessories:
  • Gerbera Straight x 1
  • Tiger Pierce x 1
  • Tactical Arms II L


RM900.00
img
SAVERM10.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam

[Daban] PG 1/60 Phenex Gundam Unicorn

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM450.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
img
SAVERM150.00

Daban Metal Structure Nu Gundam 1/60 Model Kit (with 6 Fin Funnels)

Daban Metal Structure Nu Gundam 1/60 Model Kit

Content 
* 130 runners+ 
* All parts are pre-painted (Except PC) 
* Base platform / action base included, comes with pre-printed decal. 
* A set of mechanic figures 
* Fin Funnel x 6pcs, Rfle x 1, 
* Shield x 1 
* LED units for Base Action and Main Body
* Water Decal x 2pcs

Bonus Items : Extra 6 pcs Fin Funnel

RM1650.00
RM1650.00 Request Stock
img
SAVERM716.80

PG Gundam Exia (LED Lighting Model)

This beautifully detailed Perfect Grade kit of the Gundam Exia includes an LED set to light it up in dramatic fashion!  Featuring a carefully engineered inner frame, it's fully posable after assembly and is loaded with weapons; a special base is included as well. The LED color can be changed from blue to red, and the LED for the GN drives and the eyes can be activated separately. LED set requires 4 AA-size batteries, not included.

[Includes]:

* GN sword
* GN shield
* GN long blade
* GN short blade
* GN beam saber (x2)
* GN beam dagger (x2)
* Marking stickers
* Silver stickers
* Silicon sheet (x2)
* LED set

RM1200.00
RM1200.00 Request Stock
img
SAVERM980.00

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [Without LED] [REISSUE]

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [REISSUE]


*LED is sold separately
*Gold Plated

RM2220.00
RM2220.00 Request Stock
img
SAVERM497.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM880.00
img
SAVERM428.20

P-Bandai PG 1/60 Gundam Astray Blue Frame

P-Bandai PG 1/60 Gundam Astray Blue Frame (2nd Issue)


From MOBILE SUIT GUNDAM SEED ASTRAY,

"The Best Mercenary" GUNDAM ASTRAY BLUE FRAME is joining the Perfect Grade!

Perfect Grade perfecting the true meaning of BLUE FRAME------------------

Excellent shape & color replication. Brand new weapons, figures, and markings included.

-------------------------------------------------------------------

* 'M68 "Cattus" 500mm Recoilless Gun' included

The huge weapon 'M68 Cattus 500mm Recoilless Rifle is included with brand new design.

Trigger adjustment, extendable barrel, and detachable missile rack, various gimmicks set to increase the play value.

Size(total length)・・・in stored state: about 265mm/in deployed state: about 280mm

* Original Marking included.
Brand new marks such as caution marks are included, along with Gai Murakumo's personal mark.

* Figure included
2 types of new Gai Murakumo figures in the same scale are included (standing ver./sitting in cockpit ver.)

* Perfect Grade's extremely wide movability.

PG GUNDAM ASTRAYs possess the 'Movable Inner Skeleton" to achieve the flexible and dynamic movability.
By linking the armor to the frames and multiple joints, it's possible to create poses similar to human bodies.

The knee parts and knee joints are die casted to improve durability when posed.

* Camera Eye Light
The Camera Eyes (eyes) on the head are built with light unit inside, and can be lit with batteries (sold separately)

*Required Battery: CR1220 (sold separately) x1 
Weapons: M68 "Cattus" 500mm Recoilless Gun, Beam Rifle, Beam Saber, Shield

RM950.00
img
SAVERM125.00

[NillSon] 1/60 Astray Red Frame Gundam Flight Unit - with Backpack (Deactivate Mode) [Gray]

* This is a NON Bandai product.

Package include :
* 4 blade swords 
* Special PG Action base
* Deactivate Frame Colour

Around 30cm height 
Package size : 50cm x 40cm x 30cm (19.69in x 15.75in x 11.81in)

RM475.00
img
SAVERM300.00

[MECHANICORE] 1/72 MAS-20 PYRANNOSAURUS



    *** PRODUCT SPECIFICATION***

  • 1. Head Height : 260MM
  • 2. Height : 285MM
  • 3. Depth : 151MM
  • 4. Mega Cannon Length : 324MM
  • 5. Mega Shield : 240 x 130MM
  • 6. Plastic parts : Approx~ 1650 pcs
  • 7. Maintenance valve : 55
  • 9. Valve metal hinges : 19
  • 10. LED = 28
  • 11. Power Control Unit
  • 12. Specified Platform and Stand Bundled
  • 13. Premium Exclusive : Heavy Laser Rifle bundled

RM1480.00
RM1480.00 Request Stock
img
SAVERM40.00

Gao Gao PG 1/60 OO Raiser Gundam

Gao Gao PG 1/60 OO Raiser Gundam

RM380.00
img
SAVERM120.00

[Daban] Perfect Grade PG 1/60 Exia Avalanche / Repair with LED

Daban 1/60 Exia Avalanche/Repair


Limited edition including -  

  • PG Exia model kit
  • PG Exia use LED
  • PG Avalanche parts
  • PG Repair parts

Limited stock release

This package does not include Assembly Manual hard copy. Please download the link provided below:

Installation Manual

RM560.00
img
SAVERM547.50

PG 1/60 Perfect Strike Gundam

If you already have the PG Strike Gundam, you can purchase the Premium Bandai Perfect Striker pack expansion pack separately!

The full kit will also include updated armor parts for the original PG Strike Gundam.

[ACCESSORIES]
Yellow LED
Strike Gundam new armor parts
Aile Strike pack (Perfect Strike Ver.)
Sword Striker pack
Launcher Striker pack
New pointers
New molded parts are added to the kit, that includes the newly designed armor parts for its body and head.
Gunmetal inner framing colors! Chrome parts are also provided for the plated parts.
Extra finish parts are also introduced in various pieces of the new armor, resulting in a more sophisticated design.

RM950.00
img
SAVERM4000.00

[PRE-ORDER] P-BANDAI: PG 1/60 Unicorn Gundam 03 Phenex [Narrative Ver.]

This is a Pre-Order Item, please don't combine this item with others product in 1 order.
Release Date: Jan 2021


Estimate Arrival Date: Feb/Mar 2021
PO Price: RM 3499.00 , Deposit: RM 500 , Balance RM2999.00
Ready Stock Price RM3800.00

Deposit is not-refundable, please think carefully before make order.
#########################################################

P-BANDAI: PG 1/60 Unicorn Gundam 03 Phenex [Narrative Ver.]

The Perfect Grade Unicorn Gundam series continues with the Gold Plated Unicorn Gundam 03 Phenex [Narrative Version]. The kit features entirely new molded parts for the tail stabilizers while it shares the same molds from the PG 1/60 Unicorn Gundam 03 Phenex that was first released in 2017.

RM500.00
img
SAVERM799.00

Mechanicore 1/72 MAS-10 GP01 Ground-Force Type (10th Anniversary Offer)

Mechanicore 1/72 MAS-10 GP01 Ground-Force Type (10th Anniversary Offer)
- 10th Anniversary Special Offer
- Premium Bonus - A set of clear body outer armor parts
- The inner parts of the kit are exclusively injected in silver plastics for this limited version. (Except particular ones)

RM200.00
img
SAVERM5.00

[Nilson Work] PG 1/60 Astray Red Frame Gundam - with Backpack Flight unit, 4 katana and Circle base stand

* Ready Stock Unit *

Brand : Nilson Work
Scale : 1/60
Grade : Perfect Grade / PG
Model : Astray Red Frame

Package Include :
- Model kits body
- Flight Unit
- Katana  x 4
- PG Stand 

RM475.00
img
SAVERM40.00

[Daban] PG 1/60 Unicorn Gundam Perfectibility Divine Unicorn Perfect + Full Armor Weapon Pack

[Daban] PG 1/60 Unicorn Gundam Perfectibility Divine Unicorn Perfect Full Armor Weapon Pack

Series: Gundam Unicorn
Grade: Perfect Grade (PG)
Manufacturer: Daban
Scale: 1/60

Please note that this is NOT BANDAI product

RM680.00
img
SAVERM200.00

Bandai China Exclusive RX-78-2 Gundam Head Display

The BN Head Collection RX-78-2 Gundam marks the first volume of said series of collections and the promotional image hinted that we will see more entries in the future.

The head display measures approximately 470mm with the base (375mm without the base), with a width of 490mm including the span of its V-fin and a depth of 330mm.

RM999.00
img
SAVERM20.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam NT Version

[Daban] PG 1/60 Phenex Gundam Unicorn NT Ver.

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60
Model: NT Ver. 

Please note  that this is Not-Bandai product

RM460.00
img
SAVERM60.00

Daban PG 1/60 Exia with LED

PG 1/60 Exia with LED

Grade : Prefect Grade
Scale : 1/60
Model : Exia with LED

Please note that this is Non-Bandai product

RM420.00

Showing 1 - 30 of 61 products