• Devil Hunter DH-04 Blade Dragon Emperor (Diecast Action Figure)
• Arrival Date: Estimated 4th Quarter (Apr / May) 2022
• Height: Around 27CM
• Weight : 1.5KG
• Material : ABS,PVC,PA,POM,Die-Cast

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

The new female version of 30MM (30Minutes Missions) Spinatio is now available in a command specification! This all-in-one item combines armor and weapon parts in addition to the main figure; while taking full advantage of the range of mobility, there's no pinching during assembly. Various weapons such as a chain gun, combat knife and shield are included, and a common 3mm joint structure allows you to combine existing 30MM items with this kit. Order yours now, and build your ultimate army!

[Includes]:

• Chain gun
  
• Shield
• Combat knife
• Hand parts (x5 -- weapon-holding left and right, flat hand left and right, weapon holding right)
• Armor (x1 set)
• Joint parts
  

-From [86-Eighty Six-], a new aircraft [Legin Rave] on which the main characters board is now available in [Long barrel equipment / Missile equipment]!

-A selectable assembly kit that can be assembled by selecting either [long barrel equipment] or [missile equipment].
-Equipped with [sensors] on the left and right sides of the aircraft.
-Equipped with a long barrel specialized for long-range artillery.
-Equipped with [Missile Pod]. The red part on the front of the missile pod is reproduced by dividing it into parts.
-[Heavy machine gun] is attached to the sub arm.
-Compared to the Jaguar Note (sold separately), the armor of the torso and legs has been strengthened, and the volume of the Legin Rave aircraft has been reproduced!
-By providing multiple movable axes at the base of the torso, the joints of the legs, and the armor of the legs, intense actions can be reproduced.
-The movable axis of the back and the drawer structure allow you to move the armament of the back in multiple directions. Each armament on the back can be attached to another aircraft.
-The pile driver at the tip of the leg is also movable and reproduced.
-The wire anchor uses lead wires to create a battle scene. Two types of wire anchor tip parts are included.
-The canopy is equipped with an opening and closing gimmick.
-Reproduce the fine details of the cockpit. Also included is a figure that can be attached to the cockpit.

[accessories]
? Long barrel smoothbore x 1
? Missile pod x 2
? Heavy machine gun x 2
? Sensor x 2
? Lead wire x 2
? Figure x 2
? Marking sticker x 1
? Foil seal x 1
? Action base x 1

-From [86-Eighty Six-], a new aircraft [Legin Rave] on which the main characters board is now available in HG!

-Compared to the Jaguar Note (sold separately), the armor of the torso and legs has been strengthened, and the volume of the Legin Rave aircraft has been reproduced.
-By providing multiple movable axes at the base of the torso, the joints of the legs, and the armor of the legs, intense action can be reproduced.
-The movable axis of the back and the drawer structure allow you to move the armament of the back in multiple directions. Each armament on the back can be attached to another aircraft.
-The pile driver at the tip of the leg is also movable and reproduced.
-The wire anchor uses lead wires to create a battle scene. Two types of wire anchor tip parts are included.
-The canopy is equipped with an opening and closing gimmick.
-Reproduce the fine details of the cockpit. Also included is a figure that can be attached to the cockpit.
-Equipped with a [smoothbore gun] based on the characteristics of the Jaguar notebook.
-[High frequency blade] is attached to the sub arm.

[accessories]
? Smoothbore x 1
? High frequency blade x 2
? Lead wire x 2
? Figure x 1
? Marking sticker x 1
? Foil seal x 1
? Action base x 1

Bandai Plastic Model Kit - Entry Grade PAC-MAN (Crossover with NBA)

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-[Because I'm the strongest] From the TV anime [Jujutsu Kaisen], Satoru Gojo expands into SHFiguarts.

-Three-dimensional as an action figure with a range of motion to reproduce the pose of the powerful action scene in the play.
-Comes with replacement wrists, facial expression parts, and head parts to reproduce the technique.

-Three-dimensional with modeling and proportions that imaged in the play.
-You can reproduce intense action poses like in the play.
-Includes wrists to reproduce various scenes.

- set content
? Main body
? Replacement wrist left 2 types Right 4 types
? Replacement wrist determination pose
? Replacement facial parts
? Replacement head
? Eyepatch parts

-[Chizora Ishigami] is now available in Figuarts ZERO!

-From [Dr. STONE], [Ishigami Senku] appears in Figuarts ZERO. A brave standing figure with a flag that is a symbol of the scientific kingdom is three-dimensionalized.

-A dignified expression full of determination is three-dimensionalized with delicate coloring. Along with the expression of scratches and stains on clothes, a brave standing figure is realized.

[set content]
* Main body (including effects)
* flag

- Kanada's motorcycle is back from the [Revival] world-famous animation movie [AKIRA] for the first time in 11 years.

- Die-casting is used for the main part of the frame to pursue the reality that comes from the feeling of weight. The front suspension, which is plated to enhance the texture, can be expanded and contracted like a real motorcycle. Equipped with a voice gimmick that makes a running sound when the accelerator pedal is pressed and a squeal sound when the brake pedal is pressed. You can also enjoy higher quality and clearer sound by connecting to an external speaker.
* This product is equivalent to the one released in 2010.

- Front and rear wheels, front lights, blinkers.
- The center console panel and tail lamp also emit light.
- Exterior parts can be attached and detached. Die-cast is used for the main part of the frame.
- Pursue the reality of the actual vehicle with overwhelming texture and weight.
- The total length is about 500mm, 1/6 scale. Equipped with a voice gimmick that makes a running sound when the accelerator pedal is pressed and a squeal sound when the brake pedal is pressed.
- The front light can be opened and closed.
- The front suspension is movable and the front part expands and contracts up and down.
- The center console panel is also reproduced.
- The blinker part that doubles as a side mirror is also removable.
- You can enjoy higher quality and clearer sound quality by connecting to an external speaker.

[set content]
* Kaneda's motorcycle body
* Front cowl
* Light cover
* Front wheel cover (right)
* Front wheel cover (left)
* Side cover (right)
*  Side cover (left)
*  Rear wheel cover (right)
*  Rear wheel cover (left)
*  Rear wheel frame cover
*  Tail cover
*  Side undercover (right)
*  Side undercover (left)
*  Stand auxiliary parts
*  AAA batteries (AAA) x 3 (sold separately)

She can be posed running with a forward leaning posture, a pose often seen in the game and anime series. The skirt has a slit structure on the sides, allowing for a large range of posability. The double-layered parts serve as a cover, allowing you to pose her running in a forward leaning pose without compromising her silhouette!

Three different facial expressions are included. The smiling face is reproduced using tampo printing, and the other two faces need to be created using the included water-transfer decals.

The horseshoes on the soles of the shoes are reproduced with stickers. The front and back of the shoes are separated into parts, allowing the figure to touch the ground in a flexible manner.

The head features ears and ribbons for added movement, and a ponytail that flutters in the wind. Hand parts of different colors are included on the left and right sides. A total of six different right hands are included along with a flat hand with expression. A clear molded pedestal is also included.

Connect the support pole to the back, and you can pose the body in a running position!

[Includes]

• Expression parts x 3 types
• Hand parts x 1 set
• Dedicated display stand
• Water transfer type decals
• Sticket sheet

Please note that some of the photos and illustrations of the products may differ from the actual products.