• Home
  • Showing Other Series Kits + KYOKAI SENKI / BOUNDARY FIGHTER product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Other Series Kits + KYOKAI SENKI / BOUNDARY FIGHTER product(s)

Showing 1 - 30 of 37 products

Quick View
img
SAVERM47.80

[01] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS KENBU

??In commercialization, the main character was made into a three-dimensional model after structural verification for actually designing a 10m class aircraft by KEN OKUYAMA DESIGN.

--AMAIM (Amain) equipped with I-LeS (Autonomous Thinking AI) assembled with the autonomous thinking AI guy that Amou who was collecting junk parts met.
-Equipped with a cylinder gimmick on the chest. Action poses with the attached armed sword and cannon can also be reproduced in a wide range of motion.
-The head camera parts are composed of 3 sides on one side, and the shape is reproduced in detail even on 1/72 scale.
--Equipment for reproducing the unfinished state of the right shoulder and left arm can also be attached.

[accessories]
? 60mm carrying cannon x 1
? Super heat-shaking combat straight sword x 1
? Shielded dagger x 1
? Weapon rack x 1
? Hand parts Flat hand (left and right), weapon holder (left and right), gun holder (right)
? A set of parts for reproducing the unfinished state
? Seal x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM47.80

[02] [Kyokai Senki / Boundary Fighter] HG 1/72 Bunyip Boomerang

-From [Boundary Warfare], commercialize the unmanned aerial vehicle AMAIM [Bannip Boomerang] owned by the Oceania Union with HG!

--AMAIM has been three-dimensionalized after verification of the movable structure by KEN OKUYAMA DESIGN in commercialization.
-By storing the head unit, deploying the left and right cannons, and replacing them, you can reproduce the hidden knife gimmick of the small arm.
-Reproduce each form such as patrol state / high mobility combat state / parked state by replacing some parts.

[accessories]
? Knife parts (left and right)
? Independence auxiliary parts x 2
? Seal x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM47.80

[05] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS REIKI

-From [Borderline fighter], AMAIM [Reiki] equipped with I-LeS (autonomous thinking AI) is commercialized!

-AMAIM has been three-dimensionalized after verification of the movable structure by KEN OKUYAMA DESIGN.
-Shiobe Zion boarded as a pilot.
-In addition to the deployment of the large rear skirt, the thruster unit equipped on the whole body can rotate.
-A taser launcher (provisional) and a super-heated halberd sword are included.

[accessories]
? Super heat-shaking Naginata x 1
? Taser launcher (provisional) x 1
? Hand parts x set
? Seal x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM65.70

[Kyokai Senki / Boundary Fighter] Figure-rise Standard Shishibe Shion

-Pilot Shiobe Zion from Meiles Reiki is now available in Figure-rise Standard!

[accessories]
? Three facial expressions (smile (tampo printing), angry face, surprised face)
? Hand parts flat hands (left and right), grip hands (left and right)
? AI mascot (I-LeS Nayuta) x 1
? Seal x 1
? Water slide decal x 1
? Display pedestal x 1

RM132.00
RM132.00 Add to cart
Quick View
img
SAVERM47.80

[03] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS JOGAN

-From [Boundary Warfare], AMAIM [Jogan] equipped with I-LeS (Autonomous Thinking AI) on which Resistance Tetsuzuka Gasin is on board is three-dimensionalized with HG.

-AMAIM has been three-dimensionalized after verification of the movable structure by KEN OKUYAMA DESIGN in commercialization.
-For the rear armor, the outrigger deployment state is reproduced by replacing parts. The heel part is also expanded, and the shooting pose can be reproduced.
-Comes with a 120mm double sniper gun. The stock of the stock is a sliding stock that reproduces the shooting pose.
-Combat daggers can be stored behind the left shoulder shield.

[accessories]
? 120mm double sniper gun x 1
? Battle dagger x 1
? Left shoulder shield x 1
? Hand parts Flat hand (left and right), weapon handle (left and right), rifle handle (right)
? Rear armor deployment parts x 1
? Seal x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM55.70

[04] [Kyokai Senki / Boundary Fighter] HG 1/72 AMAIM GHOST

-From [Amaim Warrior] comes a mysterious jet-black AMAIM ghost!

-AMAIM with many mysteries that has been three-dimensionalized after verification of the movable structure by KEN OKUYAMA DESIGN.
-The characteristic structure of the legs makes it a highly actionable kit.
-The jamming unit on the back can be moved and opened and closed.
-Precisely express the different arm shapes on the left and right, and the camera eye on the head.
-The color of the nails of the limbs and movement are also reproduced by dividing the parts.
-The right hand slides the back part as a weapon holder to reproduce the knuckle mode. Some weapons of the separately sold [Amaim Warrior] product can also be equipped.

[accessories]
? Hand parts x 1 set
? Seal x 1

RM112.00
RM112.00 Add to cart
Quick View
img
SAVERM47.80

[Kyokai Senki / Boundary Fighter] [09] HG 1/72 Jo Hound

-From [Amaim Warrior], the mass-produced AMAIM Joe Hound, designed by Kanetake Ebikawa, is now available in HG!

-The special rifle has a removable magazine and grenade.
-Reproduce the parked state and changes in facial expressions by opening and closing the head shutter.
-Two types of hand parts are included.
-The weapon holder slides the back parts to reproduce the knuckle mode.

[accessories]
? Hand parts Weapon holder (left and right), flat hand (left and right)
? Rifle (equipped with grenade launcher) x 1
? Seal x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM47.80

[06] [Kyokai Senki / Boundary Fighter] HG 1/72 BRADY HOUND

From Kyokai Senki, which started broadcasting in October 2021, the North American Alliance Army mass-produced machine Brady Hound designed by Kanetake Ebikawa has already been added to the HG lineup!
Two special knives are attached, and the magazine and grenade can be attached to and detached from the special rifle.
Two types of hand parts are included. The weapon holder slides the back part to reproduce the knuckle mode.
Head parts for parked state are also included and can be reproduced by replacement.
Reproduce the transportation condition in combination with HG 1/72 V-33 Stoke Carry (sold separately).

[Accessories]
  • Hand parts Weapon holders (left and right), flat hands (left and right)
  • Dedicated rifle (equipped with grenade launcher) x 1
  • Dedicated knife x 2
  • Foil sticker x 1
  • Head replacement parts x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM55.70

[Kyokai Senki / Boundary Fighter] HG 1/72 V-33 Stork Carrier

V-33 Stoke Carry of the North American Alliance Army has appeared from Boundary Warfare Machine which started broadcasting in October 2021!
Landing gear and towing arm parts are included, and the transportation status is also reproduced.
The landing gear is removable and can be reproduced even when it is stored.
A clear molded display base is included.
The machine gun protruding from the tip of the fuselage can be moved up and down as a separate part. The opening and closing of the missile hatch on the side of the aircraft is also reproduced.
By unifying on 1/72 scale, it also works with the same army HG Brady Hound (sold separately).
Bonus parts for HG 1/72 Meiles Jogan (sold separately) scheduled to be released in November are included.

[Accessories]
  • Towing arm x 1 set
  • Landing gear x 1 set
  • Display base x 1
  • Display base joint parts x 1 set
  • HG Jaw gun parts Armored pistol x 2, 45 mm rapid-fire pistol x 2, gun holder Hand (left), weapon rack joint parts x 1 set
  • Foil seal x 1

RM112.00
RM112.00 Add to cart
Quick View
img
SAVERM167.50

[Kyokai Senki / Boundary Fighter] FULL MECHANICS 1/48 Meiles Kembu

From Kyokai Senki, which started broadcasting in October 2021, the main character, Meiles Kembu, has been added to the FULL MECHANICS lineup! By configuring it on a 1/48 scale, the frame structure is included in the aircraft to make it three-dimensional!
Reproduce the arm raising and lowering action of the rear skirt. It is also possible to direct the boarding of Shiiba Amou.
The portable cannon is partially textured to express the high-density details of the surface mold.
Amou figures are also included, with standing knees and sitting.
Arm super heat swing type battle claw and dagger with shield are included and can be installed by rearranging.
The legs that have achieved a wide range of movement due to the special structure are equipped with a gimmick that can pull out the knee armor when touching the ground.
With the metallic 3D sticker, the color of the sensor mold of the limbs can be selected from green and red.
Meiles Kembus armor comes with a mechanical frame and armament that are in the process of being assembled. Can be reproduced by replacing parts.
This product of the first production comes with the first limited clear exterior. The mold of the inner frame is transparent, and it is possible to assemble it to a finish that feels a mechanical design.

[Accessories]
  • 60mm carrying cannon × 1
  • Super heat swing type combat straight sword × 1
  • Arm super heat vibration type battle claw × 1
  • Shielded dagger × 1
  • Weapon rack × 1
  • Hand parts flat hands (left and right) , Weapon holder (left and right), Gun holder (left and right)
  • Parts for reproducing unfinished state x 1 set
  • Pilot figure x 2 types
  • Metallic 3D seal x 1
  • Marking sticker x 1
  • First-time limited clear exterior parts x 1 set

RM120.00
RM120.00 Add to cart
Quick View
img
SAVERM51.80

[Kyokai Senki / Boundary Fighter] [08] HG 1/72 BRADY HOUND (Brad Exclusive)

From Kyokai Senki, which started broadcasting in October 2021, the commander machine of the North American Alliance Army that bundles the Brady Hound unit has been commercialized! It is possible to form a unit with a stalk carry or mass production machine.
Two swords are included, and the rifle magazine and grenade are removable.
Two types of hand parts are included, and the weapon holder slides the back parts to reproduce the knuckle mode.
Head parts for parked state are also included and can be reproduced by replacement.
Foot claws can be stored.
Reproduce the characteristic shape of the Brad exclusive machine including shoulder, head and sword.
Reproduce the transportation condition in combination with HG 1/72 V-33 Stoke Carry (sold separately).

[Accessories]
  • Hand parts Weapon holders (left and right), flat hands (left and right)
  • Dedicated rifle (equipped with grenade launcher) x 1
  • Sword x 2
  • Foil seal x 1
  • Head replacement parts x 1

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM47.80

[Kyokai Senki / Boundary Fighter] [07] HG 1/72 NYUREN

From Kyokai Senki, which started broadcasting in October 2021, the crimson mass-produced machine Newren, which belongs to the Asian Free Trade Cooperative, has appeared! Reproduce the image in the play by combining multiple aircraft.
Amain New Ren designed by Ippei Gyobe is now available at HG.
A wealth of weapons such as rifles, axes, missile launchers, and shields are included.
The magazine is removable and can be stored behind the shield.
Three types of hand parts are included: rifle weapon holder, flat hand, and grip hand.
The missile launcher equipped on the arm is reproduced by dividing the parts and color-coding.
By combining multiple machines, it is possible to reproduce the image in the play that acts as a unit.

[Accessories]
  • Rifle x 1
  • Ax x 1
  • Missile launcher x 2
  • Shield x 1
  • Hand parts Flat hand (left and right), grip hand (left and right), weapon holder (left and right) Foil sticker x 1
  • Marking sticker x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM29.90

[Kyokai Senki / Boundary Fighter] HG 1/72 AMAIM Warrior at the Borderline Weapon Set 3

This weapons set allows your Kyoukai Senki model kits to be ready for anything! Order yours today!

[Includes]:

- Laser cannon
- Large shield
- Sword (x2)
- Winch unit (x2)
- Anchor (claw deployment) (x2)
- Waist back weapon rack (with spare magazine)
- Leg thread (x2)
- Lead wire (x2)

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM109.40

[Kyokai Senki / Boundary Fighter] FULL MECHANICS 1/48 Meiles Kenbu Zan

The main character of the second part of "Kyoukai Senki" MAILeS Kenbu ZAN, has joined Bandai's FULL Mechanics model-kit lineup! This robot features a mechanical design that makes it not only highly efficient in battle, but also easy to maintain and highly durable. It comes with its large super-heated combat long sword, which can be placed on the weapons rack on its back. The cannon on its arm can be removed, and the chest structure that mimics that of the human body reproduces the expansion and contraction movement. The cockpit can be opened and closed. Metallic parts reproduce the distinctive look of its joints, and the metallic 3D seals reproduce the texture of the sensor molds on its limbs! Order yours now!

[Includes]:

  • Super heat-shaking battle long sword
  • 40mm arm cannon
  • Weapon rack
  • Interchangeable hands: flat hands (left and right), weapon-holding hands (left and right)
  • Pilot figure (x2 types)
  • Metallic 3D stickers
  • Marking stickers

RM220.00
RM220.00 Add to cart
Quick View
img
SAVERM53.80

[11] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS Jogan Kai

After structural verification by KEN OKUYAMA DESIGN, the improved machine of Jogan, \"Jogan Kai\" is three-dimensionalized with HG!
? From the second part of \"Kyoukai Senki\", Tezuka Gashin boarded. It was reborn as an robot with great firepower by transplanting the autonomous thinking type AI Kay.
? A large gatling gun is attached to the front of the robot, and a large drum magazine is attached to the back to control the enemy with overwhelming firepower.
? The rear skirt has a built-in bipot to support the robot from the reaction of Gatling. Can be deployed in the installed state by replacing parts.
? The shields on both shoulders are connected to the armor at the base of the Gatling to reproduce a highly defensive state.
? Two short cannons can be stored in the armor on the front of the main unit.

?accessories?
? 45mm rotary armor cannon x 1
? Shoulder shield (left and right) x 1
? 40mm portable short cannon x 2
? Hand parts Flat hand (left and right), grip hand (left and right), gun holder (left and right)
? Foil sticker x 1

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM40.70

[Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS Byakuchi (FGE color)

From the gaiden [AMAIM: Warrior at the Borderline: Frost Flower] serialized in the monthly Hobby Japan, the MAILeS Byakuchi that was owned by the Federation of Great Eurasia (FGE) that appeared in the second episode was commercialized. 

The body color, which is based on brown and has a strong military color, is reproduced with the molding color. A machete, multi-launcher, and grenade launcher are included with new modeling. By recombining the armament, the normal armed state that appeared in the second episode can be reproduced. In addition, the wide range of motion allows for various action poses such as combat and kneeling. In addition, it will be delivered in a newly written full-color package.

Content : 
  • Body Unit
  • Machete, 
  • multi-launcher, 
  • grenade launcher, 
  • 60mm carrying cannon (multi-magazine type), 
  • quadruple guided bullet carrying launcher, 
  • general-purpose carrying shield, 
  • weapon rack

RM115.00
RM115.00 Add to cart
Quick View
img
SAVERM47.80

[Kyokai Senki / Boundary Fighter] [10] HG 1/72 Meiles Kenbu Zan

This new item from "Kyoukai Senki" will be spectacular -- more details to come soon, so stay tuned!

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM102.00
RM102.00 Add to cart
Quick View
img
SAVERM47.70

[Kyokai Senki / Boundary Fighter] HG 1/72 Setsuro

HG 1/72 Setsuro from AMAIM: Warrior at the Borderline: Frost Flower

This item reproduces the characteristic parts with new modeling. You can enjoy dynamic poses with accessories that widen the width of the display and outstanding range of motion. In addition, the equipment that can be attached to the shoulder can reproduce the injection state.

RM108.00
RM108.00 Add to cart
Quick View
img
SAVERM53.80

[Kyokai Senki / Boundary Fighter] HG 1/72 Brady Fox

From the second season of \"Kyoukai Senki\" comes the new and improved Brady Fox AMAIM unit (Auto Mobile Artificial Intelligence Mount), the main mobile suits used by the NAC Forces!

The HG Brady Fox features superb articulation so you can recreate a wide range of battle poses, and the head parts can be exchanged to turn it into an unmanned unit. A large shield is included with a moveable lower section, and it comes with a giant laser cannon too!

[Includes]

  • Laser Cannon
  • Large Shield
  • Open palm hand parts (right, left), weapon holding hand parts (right, left)
  • Unmanned Unit recreation part
  • Foil sticker sheet

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM53.80

[Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS Reiki Kai

The HG MAILeS Reiki is back in its upgraded Kai form from the second season of \"Kyoukai Senki\"!

The Reiki Kai features high articulation thanks to its expertly designed joint structures, as well as the cylinder gimmick in the torso that moves in conjunction with the shoulder joints. The thruster units can also rotate and Bandai has recreated the unfolding mechanism in the waist rear skirt. The included Naginata weapon can also extend and retract for plenty of battle poses!

[Includes]

  • Super heated vibrating Naginata Kai
  • Hand parts: flat hands (left and right), weapon handle (left and right), gun holding hand (right)
  • (Back-mounted type) Multiple miniature guided rocket launcher x1 set
  • Foil sticker sheet

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM51.80

[Kyokai Senki / Boundary Fighter] [18] HG 1/72 MAILeS Byakuchi (Drill / Claw Arm)

The MAILeS Byakuchi from "Kyoukai Senki: Frost Flower" joins the "HG" model-kit series from Bandai! It features newly shaped large arms, as well as a large drill arm as tall as Byakuchi itself! Three of the drill parts can be moved individually. A fork bucket-type large claw arm is also included; the tip part can be moved individually when it's linked with the cylinder part. Order this amazing mecha for your own collection today!

[Includes]:

Drill arm
Claw arm (fork bucket type)
Quadruple guided missile launcher
General-purpose carrying shield
Forearm parts (left and right)
Hand parts: open hand (left and right), weapon-holding hands (left and right), gun-holding hand (right)
Stickers
Marking stickers

RM92.00
RM92.00 Add to cart
Quick View
img
SAVERM52.30

[Kyokai Senki / Boundary Fighter] HG 1/72 Brady Fox (Type G)

The Brady Fox Type G, a reinforced version of the Brady Fox that appeared in the second part of the "Kyoukai Senki" anime and cornered the main characters, is now part of Bandai's "HG" model-kit series! Its dark coloring is perfectly reproduced for an anime-accurate look, and its laser cannon is included; hand parts allow it to be held with both hands. Its large shield is also included, and it can be displayed in either its manned or unmanned mode by replacing parts on the head visor. Order yours today!

[Includes]:

Laser cannon
Large shield
Hand parts: open hands (left and right), weapon-holding hands (left and right), gun-holding hand (right)
Manned mode reproduction parts
Foil stickers

RM97.50
RM97.50 Add to cart
Quick View
img
SAVERM23.90

[Kyokai Senki / Boundary Fighter] HG 1/72 Boundary Battle Weapon Set 5

This set of extra weapons allows you to add more firepower to your "Kyoukai Senki" model kits! It includes a set of armament and armor parts, such as a super heat swing combat curved sword and a 180mm back-suspended automatic grenade gun. 
The stake part of the 200mm combat pile injection machine can be slide, and you can reproduce the injection mode without parts replacement. A left hand for holding weapons is also included. 
Combine this set with the HG 1/72 MAILeS Byakuchi to recreate its appearance in the final battle of the Gaiden! 
The set can also be used to customize other "Kyoukai Senki" mecha, too. Order yours today!

RM48.00
RM48.00 Add to cart
Quick View
img
SAVERM29.90

[Kyokai Senki / Boundary Fighter] HG 1/72 Amaim Warrior at the Borderline Weapon Set 7

Here's a new HG set of weapons for your "Kyoukai Senki" model kits! Combine them with Bandai's 1/72-scale "Kyoukai Senki" MAILeS model kits to create your own unique heavily armed mecha --  order yours today!

[Includes]:
- Gatling gun
- Short-barrel rifle
- Assault rifle
- Flamethrower
- Javelin
- Blade
- Thruster unit
- Guard unit
- Joint parts

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM49.80

[Kyokai Senki / Boundary Fighter] HG 1/72 Aaron Rhino (Grady Exclusive)

Grady's Aaron Rhino from "Kyoukai Senki" is now an HG-series model kit from Bandai! With an emphasis on expandability, 3mm-diameter connection ports are placed in various areas for customization. Combine it with the separately sold weapon set series to create your own original mecha kit! It's equipped with a variety of weapons, including a special blade, short-barrel rifle, and chain gun. The special blade can be mounted under the armpit, and joint parts for mounting the short-barrel rifle are included too. "Battle mode" and "enemy search mode" can be reproduced by replacing the head parts. You can also combine it with the HG 1/72 V-33 Stalk Carry (sold separately) to display it in transport! Order yours today!

[Includes]:

- Dedicated blade
- Short-barrel rifle
- Head replacement part
- Hand parts (x1 set)
- Joint parts (x1 set)
- Stickers (x2 types)

RM100.00
RM100.00 Add to cart
Quick View
img
SAVERM47.80

[Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS Gouyou Custom

The MAILeS Gouyou Custom, the mech operated by the main character in "Kyoukai Senki," gets a new High Grade model kit from Bandai! With an emphasis on expandability, 3mm-diameter connection holes are placed in various places to allow customization. If you combine it with the weapon set series (sold separately), you can create your own custom model! A variety of weapons is included, such as the arm pile, normal assault rifle, and normal handgun. The guns can be attached to various connection holes by using the included joints, and the pile part of the arm pile can slide and reproduce the injection state without parts replacement. Order yours today!

[Includes]:

  • Normal assault rifle
  • Normal handgun
  • Arm pile
  • Weapon rack
  • Rear car truck
  • Hand parts (x1 set)
  • Joint parts (x1 set)
  • Stickers (x2 types)

RM96.00
RM96.00 Add to cart
Quick View
img
SAVERM54.80

[Kyokai Senki / Boundary Fighter] HG 1/72 Aaron Rhino

The North American Alliance Army's latest mass-produced machine, the Aaron Rhino, from "Kyoukai Senki" is now a High Grade model kit from Bandai! With an emphasis on expandability, 3mm-diameter connection holes are placed in various places to allow customization. If you combine it with the weapon set series (sold separately), you can create your own custom model! It's equipped with a variety of weapons, such as a knife, assault rifle, and chain gun. A knife can be mounted under the armpit, and both "battle mode" and "enemy search mode" can be reproduced with parts replacement. Combine it with the HG V-33 Stalk Carry to display it in transport mode! Order yours today!

[Includes]:

  • Knife
  • Assault rifle
  • Head replacement parts
  • Hand parts (x1 set)
  • Joint parts (x1 set)
  • Stickers (x2 types)

RM95.00
RM95.00 Add to cart
Quick View
img
SAVERM47.80

1/72 HG MAILeS Proto Gouyou

The HG MAILeS Photo Gouyou from "Kyoukai Senki" joins the HG model-kit lineup from Bandai! Highly posable after assembly, it's loaded with 3mm-diameter ports for customization; you can combine it with items from the separately sold Weapon Set series to create your own heavily-armored mech! Various weapons such as a machete, special assault rifle, special handgun and dagger are included. 

The dagger blades are removable, and can be stored in the armor behind the knee; in addition, the head can be displayed either deployed or retracted. Order it for your own collection today!

[Includes]:

Dedicated assault rifle
Dedicated handgun
Machete
Dagger (x2)
Weapon rack
Rear car truck
Hand parts (x1 set)
Joint parts (x1 set)
Stickers (x2 types)

RM96.00
RM96.00 Request Stock
Quick View
img
SAVERM29.90

[Kyokai Senki / Boundary Fighter] HG 1/72 Amaim Warrior at the Borderline Weapon Set 6

Here's a new HG set of weapons for your "Kyoukai Senki" model kits!

Combine them with Bandai's 1/72-scale "Kyoukai Senki" MAILeS model kits to create your own unique heavily armed mecha --  order yours today!

[Includes]:
- Arm pile
- Sniper rifle
- Assault rifle
- Handgun
- Hydro jet pack
- Chainsaw
- Axe
- Weapon rack

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM26.90

[Kyokai Senki / Boundary Fighter] HG 1/72 Weapon Set 4 Multi Joint Frame

This new "Kyoukai Senki" weapon set provides you with new customizable arm and leg parts! Each limb has 3mm-diameter connection holes for highly expandable customization; it comes with a weapon rack and rear skirt rack to increase the degree of freedom in customizing your unit's back. Newly designed head parts are also included. Combine these parts with your "Kyoukai Senki" kits (sold separately) and the Weapon Set for a degree of customization you'd never thought possible! Order yours today!

[Includes]:

  • Arm parts (left and right)
  • Leg parts (left and right)
  • Weapon rack
  • Rear skirt rack
  • Head parts
  • Hand parts
  • Joint parts

RM45.00
RM45.00 Request Stock

Showing 1 - 30 of 37 products