- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

Copyright Sotsu Agency / Sunrize Item Size 20.4 x 15 x 5.5 cm

Copyright Sotsu Agency / Sunrize Item Size 20.4 x 15 x 5.5 cm

-Assembling required -Comes with instruction booklet in Japanese

- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required. - Copyright Sotsu Agency / Sunrize Item Size/Weight : 31 x 20 x 11.4 cm / 510g

Tieria Erde's personal Mobile Suit, Seravee Gundam, heads our way with cannons galore! Seravee, a smaller version of its predecessor Gundam Virtue, comes with two backpack-mounted GN Cannons, a GN Cannon on each knee, and a pair of single GN Bazooka IIs, which can be attached to the GN Cannons on its back to form Twin Buster Cannons, or combined to create a highly powerful GN Bazooka II Double Bazooka! WOW! The huge head on Seravee's back can slide open into Face Burst Mode and the two thrusters below it are flexible. The pre-colored, snap-together model is flexible due to its polycapped joints, and a sticker sheet for added detailing is included. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. Paint and glue are not needed to complete the kit. 

This Seravee Gundam High Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.

Include : GN BazookaII x 1

Include : GN Saber x 2, GN Rifle x 1, Gatling Gun x 1 Copyright Sotsu Agency / Sunrize Item Size/Weight : 31 x 19 x 7.2 cm / 337g Arios Gundam, from Celestial Being, is a fun addition to the Gundam 00 line with its ability to switch between Mobile Suit and Mobile Armor modes. It can be equipped with its GN Twin Beam Rifle, two Beam Sabers, and a GN Submachine Gun located under the cover of each wrist. When in Mobile Armor mode, the GN Beam Shields can be opened and used as a cool claw weapon similar to the GN Shield of its predecessor Gundam Kyrios. Trusty polycap joints allow the Arios Gundam to acheive some nice poses. A sheet of foil stickers and a display stand are included. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. Paint and glue are not needed to complete the kit. This Arios Gundam High Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.

• Gundam Exia Normal Scale 1/60
• Comes with installation manual, stickers
• scale is larger then master grade but not so detail
• Snap and fits so glue is not needed.

• Bandai's High Grade Universal Century kit line continues to get better and better and nowhere is this in evidence more than on the latest kit, the 00 Gundam Seven Sword/G. 
  
• Molded in color with clear parts and marking stickers. As always, plenty of poly-caps are used to ensure a great amount of articulation. 
  
• Weapons include GN Sword II Blaster, GN Buster Sword II (assembles in shield and sword mode), GN Katar, GN Sword II Long (assembles in rifle and sword mode), GN Sword II Short, and GN Beam Saber. Weight: 330g
  

Weapons include GN beam rifle, GN beam sabers, shield, prototype GN sword, and GN launcher. Includes new features such as shoulder joints that can extend outward, allowing dramatic poses as seen in the animated series. Waist features axial cover parts for recreating off-center poses. Weight:524g

• The official side-story MS, Gundam Avalanche Exia Dash! 
  
• Avalanche Exia Dash, active in the [Gundam 00V War Record]! 
  
• Comes with a stand base to enable display during flight. 
  
• Able to recreate Gundam Avalanche Exia by selection. 
  
• The newly set booster has been equipped with the folding gimmick. Able to be displayed without a stand base. 
  
• The additional leg armory has mobile mechanism, enabling flexible poses. 
  
• Accessories: GN Sword, GN Short Blade, GN Long Blade, GN Beam Saber (off) x4,GN Beam Saber (on), Stand Base.
  

Introducing GUNDAM DYNAMES featured in GUNDAM 00 from 1/100 scale series. Various wrists and foil stickers included. Covering parts in the waist for stable-ness. Belts made with TPE. Chest lens and shoulder belts made with special material. New joint system installed. Double joint system in the shoulders. Accessories include of: Includes beam rifle, beam sabers, hand guns, and armor covers.

The Cherudim Gundam joins the lineup of 1/100 scale precision models of Mobile Suits from Gundam 00. Shoulders incorporate a swing mechanism for enhanced mobility forward, back, up, and down, allowing for dramatic "aim and shoot" poses. Forehead-mounted sensor covers open for sniper mode, and the "follow screen" is molded in translucent plastic. GN shield bits can be removed and placed on a stand to re-enact scenes from the show. Includes GN sniper rifle II, and two GN beam pistol II guns.

GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

Sharing the same mold as the 2007 1/100-scale Gundam Exia, this kit of Setsuna's Mobile Suit comes molded in glossy colors for you to build the mech in Trans-Am mode. The sharply detailed kit can take on a wide range of poses upon completion, thanks to the use of polycaps in its joints. It comes fully equipped with its signature weaponry, including a GN sword that can switch to GN sword rifle mode, and foldable shoulder antennas. Not a drop of glue or paint is required! A sheet of hologram foil stickers is included. Combat Characteristics Designated as a 3rd-generation Gundam, the Gundam Exia is built with close combat as its major strength. The unit is the successor to its second generation predecessor, GNY-001 Gundam Astraea; much of Exia's design was heavily influenced from Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems. Exia was created as a high-mobility unit to greatly supplement its close combat role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control (AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1] The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration. Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1] When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater mobility is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack. The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet. In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat. Source:wikipedia

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestal

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestalHistories:The GNX-Y903VS Brave (Commander Test Type) is featured in Mobile Suit Gundam 00 The Movie: A Wakening of the Trailblazer, where it is developed and deployed by the Earth Sphere Federation Army. The GNX-903VS Brave (Commander Test Type) is a customized version of the GNX-903VS Brave (Standard Test Type), and was assigned to Captain Graham Aker, who leads the Sol Brave Squadron, an elite mobile suit squadron composed exclusively of Brave units. The Braves were first seen when Graham deploys the Sol Brave Squadron to assist Celestial Being during their second attempt to communicate with the Extraterrestial Living-metal Shape-shifter. Graham and his squadron covered the Celestial Being retreat, and while both parties were able to retreat, the effort was not without casualties - some of Graham's Braves were assimilated, while Celestial Being lost the GN-0000RE+GNR-010 00 Raiser (Condenser Type), the GN-008RE Seravee Gundam II, the CB-002 Raphael Gundam, and the physical body of Tieria Erde. Later, Graham and his remaining men sortied to hold back the ELS invasion alongside the rest of the ESF Army and Celestial Being. During the battle, Graham defended Gundam Meister Setsuna F. Seiei and the GNT-0000 00 Qan[T] from the ELS attack. While he fought valiantly, Graham's Brave was eventually struck by several ELS, and was already being partially assimilated. With nothing left to lose, Graham decided to believe in Setsuna's vision for a brighter future, and sacrificed his life for the sake of that vision, activating Trans-Am and smashing into the ELS mothership to clear a path for the 00 Qan[T] to enter the massive superstructure. It is currently unknown how many Braves remained after the final battle, or if they were ever put into full mass-production.Source:http://gundam.wikia.com

GN-003 Gundam Kyrios MG 1/100. History of GN-003 Gundam Kyrios: Most of GN-003 Gundam Kyrios's history and exploits can be found on Allelujah Haptism's page. UN Forces Capture & Experimentation After the battle against the UN Army ended, Allelujah ejected the unit's GN Drive before it came into the hands of the UN Army. The GN Drive was recovered by Fon Spaak for Fereshte, and after Celestial Being negotiated for its return along with 0 Gundam's GN Drive. Kyrios was then used by the Human Reform League as an experiment with a Tieren arm and a GN-X hand using a GN Drive Tau. This specific experiment failed due to the GN Particles from the Drive having difficulty transferring power to the end of the experimented arm. Data gathered in these experiments was eventually used in development of the GNX-704T Ahead.What has happened to the Kyios after the expreiment remains unknown Sources:http://gundam.wikia.com

• Lens is reproduced with clear parts! 
  
• GN shield can be attached to the back! 
  
• Accessories: GN Sword V, GN Sword GN Sword V for the union point of a sword-bit, BB322 Raiser particles for storage tank, grain storage tank, seat.
  

Here's an excellent snap-fit assembly kit of Lockon Stratos' personal Mobile Suit, Gundam Dynames! Molded in color, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode.

Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor.

The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

GN-009GNHW/B Seravee Gundam GNHW/B

Arnaments in movies series
i. GN Bazookas
The new GN Bazookas are an overall improvement over Virtue's bazooka. While it can fire the weapon traditionally as a single piece weapon, GN Bazooka IIs has multi-function capabilities and enhancements over its predecessor. The 2 separate bazookas can be combined into a single form that is reminiscent of Virtue's. This design was intentional, due to past experiences with high speed combat enemy units. Virtue's Bazooka might have been powerful, but its beam fire was so slow that it was easy for enemy units to avoid getting shot. The GN Bazooka II can fire faster and can be used in conjunction with GN Cannons for extended range and firepower. When greater firepower is needed, the split bazooka can be attached onto the shoulder GN Cannons to enhance it's firing solution in range and power. As a single piece weapon, the Double Bazooka, it can fire a particle beam sphere.

ii. GN Cannons
Four GN Cannons are attached in between the rear shoulders and knees of Seravee. They are improved versions of Virtue's cannons as they are smaller, lighter, and have greater firing succession rates. The top cannons can work in conjunction with GN Bazooka II for extended range and firepower. In addition, the GN Cannons also works in conjunction with Seravee's GN Field. When all four cannons are deployed, a GN Field is generated at the center. When the cannons fire, the central GN particles and the cannon become a single blast that's comparable to Virtue's GN Bazooka Burst Mode. A hidden ability of the GN Cannons are that they double as transformable MS arms, with their own GN Beam Sabers for melee combat. This feature was added in consideration for Seravee's lack of speed, poor maneuverability, and other deficiencies as a countermeasure(s).

iii. GN Beam Sabers
Seravee has a total of 6 beam sabers, 2 in its MS forearms and 4 hidden within its cannons/MS arms. The additional beam sabers are hidden and only used in dire situations (such as facing close-combat mobile suits).

Left and right arm can be mounted on large-caliber rifle. 

HG GNW-001 Gundam Throne Eins scale 1/144

• The rifle and the model that joins equipment reproduce it by the new design. 
  
• Accessories: Additional arms (1 and missile container × GN long beam Canon Inc. × 2) and basic arms (1 and GN beam saber × GN twin beam rifle × 2)
  

(HG) MSJ-06II-ET TIEREN COMMANDER TYPE

- The color of the main body of MS construction it is a color that images [toranzamu]. In addition, gross injection processing that reproduces real [tsuyakan] is adopted. - "GN sword III" attachment equipped with large-scale arms and development gimmick.

- Accessory: GN twin beam rifle and GN beam saber