Price Clear







Showing Gundam Model Kits + MS GUNDAM 00 product(s)

Showing 1 - 30 of 190 products

img
SAVERM7.90

[333] SDBB 00 0 Gundam (Type A.C.D)

00 mobile soldier Gundam last battle. It appears in 0 BB soldier Gundam final decisive battle specification. The play inside image display is reproduced with the GN particle effect parts. 


A feature GN particle is reproduced by the effect with MS of mobile soldier Gundam 00. "SD0 Gundam", "SD double organ dam", "SD [daburuo-raiza-]", and synchronization. SD original gimmick. The effect parts can be connected with each MS. 

The outlook on the world of MS of 00 SD mobile soldier Gundam series extends further. 

 Accessory: 1 and 1 and 1 and GN particle effect display base x Gundam shield x 1 beam saber x beam cancer x Copyright [tsukutsuu] agency sunrise

RM28.00
img
SAVERM9.90

[313] SDBB 00 Gundam Exia

  • GN drive deployment! Change to the Trans-Am mode!
  • New generation real SD pose is decided! ! Action is perfect!
  • It can be equipped with all weapons! !

RM26.00
img
SAVERM15.90

[322] SDBB 00 Raiser

  • Play value packed with a large number of the original gimmick.
  • To Raiser in Gundam + Raiser.
  • Saber mode of GN Sword II is reproduced in clear plastic.
  • It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  • Width of play further expand!
  • Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2


RM44.00
img
SAVERM33.90

[038] HG 1/144 Gundam 00 Raiser (Designers Color Ver.)

  • Here's a great box set that pairs up HG 00 Gundam with HG 0 Raiser, with both molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of the Mobile Suit! There's a new sheet of original marking stickers, too. 
  • This snap-fit kit allows you to build a sharply detailed and very poseable 00 Gundam along with its support unit 0 Raiser, which can be docked to the back of the Mobile Suit to form the powered-up 00 Raiser. The Twin Drive System (GN Drives on each shoulder) are flexible, and the included pair of GN Sword II can switch between Sword Mode and Rifle Mode. 
  • A sheet of foil stickers and a display base are provided. - Unite and to Dablorraizar.  
  • Accessory: GN Sord IIx—2 and 2 and 2 and original stand x— GN shield x— 2 GN beam saber.
  • You may add on with XN-Raiser to become XN 00 Raiser.

RM74.00
img
SAVERM13.90

[334] SDBB 00 Gundam Exia Repair II

  • 00 mobile soldier Gundam final hero it is MS, it is soldier of BB, and solidification.  
  • An impressive development version is attached to the GN drive by the final episode.  
  • SD Gundam original gimmick. An original weapon bundles it. To an original weapon bringing parts only for [gandamuekushia] together.

RM34.00
img
SAVERM9.98

[316] SDBB 00 Gundam

Here's a super-deformed plastic kit of the lead Mobile Suit from the second season of the "Gundam 00" anime! 00 Gundam comes sharply molded in color and will be fully poseable with polycapped joints upon completion. With parts that snap together easily, it requires no cement or paint to complete (although paint would add a more realistic appearance). Its signature weapon loadouts are included, along with a sheet of foil stickers.

RM26.00
img
SAVERM154.90

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM234.00
RM234.00 Add to cart
img
SAVERM49.80

[021] RG 1/144 Gundam 00 Qan[T]

[21] GNT-0000 00 QAN[T] Gundam (RG)
  • Appeared finally to RG is Quanta hugely popular!
  • CONCEPT
    Pursuing a structure that feel [realistic] from the assembly stage. 
    Exia, followed the history that has been developed in light of the Double O, while utilizing the Advance de MS joint of the same type, reproduce the aircraft characteristics of Quanta. By renew the joint structure and mechanical gimmick, to achieve a high mobile performance and the amount of information.
  • RG ever largest action of
    Such as the Sword by renewed movable shaft position and the movable angle of the arm joints protrude horizontally, it improved posing performance.
    Greatly extend the range of motion of the leg by renewed moving method of waist armor. Achieve a more dynamic action poses.
  • Realistic gimmick that created from historical research based on real technology
    Renewed the GN drive attaching and detaching mechanism, fully reproduce the mechanical removable gimmick by adopting a mounting gimmick that also serves as fixing of the back pack.
    By providing the moving point of up to seven, realizing a flexible arm moving.
    GN shield deployment by the arm is to renew the movable shaft, achieve a high range of motion!
  • GN capacitor mounted frame
    While utilizing the Advanced MS joint of RG Exia the same type, the arm is completely new parts reproduction. The reproducibility capacitor disposed systemically.
  • Bit recombinant gimmick GN Sword V
    Characteristic weapon of double oak Anta - bit recombination gimmick also complete reproduction. Grip is equipped with a slide deployment mechanism. GN Sword bit can be attached to the shield.
  • Accessories: GN Sword V, GN sword bit, GN shield, simple stand, weapon possession (left and right), fist (left and right), the movable hand (left and right), palm (left), pilot figure


Item Size : 31 x 19 x 7.5 cm

RM100.00
RM100.00 Add to cart
img
SAVERM3.00

GaoGao Daban Gao Gao NG 1/100 GN-003 Kyrios Gunpla

GaoGao Daban Gao Gao NG 1/100 GN-003 Kyrios Gunpla


Brand : Daban
Scale : 1/100
Model : GN-003 Kyrios

Please note that this is NOT Bandai product

RM42.00
img
SAVERM47.60

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

  • Dedicated Action Base included
  • Brand : Daban
  • Brand Code : 8808
  • Scale : MG 1/100
Please note that this is not Bandai product

RM180.00
RM180.00 Add to cart
img
SAVERM13.00

[GaoGao] HG 1/144 00-54 00 Raiser + GN Sword III

Third Party Brand HG 1/144 00-54 00 Raiser + GN Sword III

Brand: Third Party Brand
Scale: HG 1/144
Model: 00 Raiser + GN Sword III
Series: Mobile Suit Gundam 00

Please note that this is Not Bandai product

RM28.90
img
SAVERM12.94

[GaoGao] HG 1/144 00-09 Throne Eins Gundam

Brand: GaoGao
Scale: HG 1/144
Model: Throne Eins Gundam
Series: Mobile Suit Gundam 00

Please note that this is Not Bandai product

RM22.96
img
SAVERM8.94

[GaoGao] HG 1/144 00-12 Throne Zwei Gundam

Brand: GaoGao

Scale: HG 1/144

Model: Throne Zwei Gundam

Series: Mobile Suit Gundam 00

RM22.96
img
SAVERM8.94

[GaoGao] HG 1/144 00-14 Throne Drei Gundam

Brand: GaoGao

Scale: HG 1/144

Model: Throne Drei Gundam

Series: Mobile Suit Gundam 00

RM22.96
img
SAVERM7.00

[GaoGao] HG 1/144 00-61 00 Seven Sword Gundam

Third Party Brand HG 1/144 00-61 00 Seven Sword Gundam

Brand: GaoGao
Scale: HG 1/144
Model: 00 Seven Swordig Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM12.00

Daban 6653 MG 1/100 Dynames Gundam

Robot Name : MG 1/100 Dynames Gundam
Brand : Daban Code 6653
Type : Plastic Model Kit
Size : 20cm (Approx.)

Please note that this is not Bandai Product

RM98.00
img
SAVERM3.00

GaoGao Gao Gao 00-64 HG 1/144 Gundam Fighter Avalanche Exia

HG 1/144 Gundam Fighter Avalanche Exia


Brand : Third Party Brand
Scale : 1/144
Grade : High Grade

Please not that this is NOT Bandai product

RM29.80
img
SAVERM26.00

Daban 00-09 1/100 Gundam Avalanche Exia

[Daban] 1/100 Gundam Avalanche Exia


Series: Mobile Suit Gundam 00V
Grade: NON-GRADE (NG)
Manufacturer: Daban
Scale:1/100

Please note that this is NOT Bandai product

RM60.00
img
SAVERM1.00

Third Party Brand 00-01 NG 1/100 Gundam Exia

GaoGao Daban Gao Gao NG 1/100 GN-001 Exia Gunpla


Brand : Daban
Scale : 1/100
Model : GN-001 Exia

Please note that this is NOT Bandai product

RM48.00
img
SAVERM55.00

Daban 1/100 MG 6657 GN-005 Gundam Virtue Model Kit

Daban 1/100 MG 6657 GN-005 Gundam Virtue Model Kit


Brand : Daban
Scale : 1/100
Grade : Master
Model : GN-005 Gundam Virtue

Please note that this is NOT-Bandai product

RM125.00
RM125.00 Add to cart
img
SAVERM191.20

MG 1/100 Gundam 00 XN Raiser

MG 1/100 Gundam 00 XN Raiser


From the Mobile Suit Gundam 00V side story, the 00 XN Raiser joined the MG lineup! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. Four types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head. (2 LR41 batteries required; sold separately). Water-slide decals for added detailing are included. Set includes GN Buster Sword III, GN Sword II, GN Sword III, GN Beam Saber, and GN shield, LED unit, and instructions.

Accessories:
- GN Sword II x 2
- GN Buster Sword III x 1
- GN Beam Saber x 2
- GN Shield x 1 [2 parts]
- 0 Raiser x 1

RM288.00
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
img
SAVERM23.90

[05] HG 1/144 MSJ-06II-A Tieren Ground Type (Land)

- MS mass production innovation Federation of humanity.

- In the hip using a double ball joint that allows moving up and down.
- Left and right arm can be mounted on the large-caliber rifle is armed only. The mechanism of poly shoulder caps
Used, can reproduce the various action poses and flexible.
- Each hand grip is an x corresponding to the left or right. x 1 left palm. Comes with a foil seal for detail color reproduction.
- Armed Includes: x 1 rifle arm, carbon blades x 1

RM48.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
img
SAVERM716.80

PG Gundam Exia (LED Lighting Model)

This beautifully detailed Perfect Grade kit of the Gundam Exia includes an LED set to light it up in dramatic fashion!  Featuring a carefully engineered inner frame, it's fully posable after assembly and is loaded with weapons; a special base is included as well. The LED color can be changed from blue to red, and the LED for the GN drives and the eyes can be activated separately. LED set requires 4 AA-size batteries, not included.

[Includes]:

* GN sword
* GN shield
* GN long blade
* GN short blade
* GN beam saber (x2)
* GN beam dagger (x2)
* Marking stickers
* Silver stickers
* Silicon sheet (x2)
* LED set

RM1200.00
RM1200.00 Request Stock
img
SAVERM239.00

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]


From "Mobile Suit Gundam 00 - A wakening of the Trailblazer -",

Double-o'quanta of image which executed Transum appeared in master grade.
Reproduce the red shining airframe by using special coating such as gross injection, extra finish etc.

A water transfer type decal is also newly included.


- SPECIAL COATING

The image of the shining red aircraft at the time of activating Transum is reproduced with special coating. 
Gross injection is used for the pink color armor of the main body etc.
Pearl pink coating is applied to produce a shiny feeling.
The red armored part adopts extra finish processing with metallic feeling.

Metallic colors are used for joints and arms.
 
- DECAL
Adjusted color tone according to transom mode, various markings are newly included with water transfer type decal.

- GN Drive's lighting condition can be reproduced with LED unit (sold separately) mounted!

Attached armed: GN sword V / GN sword bit / GN shield

RM360.00
img
SAVERM288.80

MG 1/100 00 GUNDAM Seven Sword/G (TRANS-AM Mode) [Special Coating]

MG 1/100 00 GUNDAM SEVEN SWORD/G (TRANS-AM MODE) [SPECIAL COATING]


Side story variant of the popular MS 00 Gundam in a limited production Trans-Am variant of the Master Grade Gundam 00 Seven sword with stylish pearlescent red hue over its entire body. This MG kit encompasses total 7 of blades on the mobile suit. It's fully articulated and made with modern plastic.

RM430.00
img
SAVERM497.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM880.00
img
SAVERM141.30

MG 1/100 Gundam Avalanche Exia

MG 1/100 Gundam Avalanche Exia


Package include
  • GN Long Blade
  • GN Short Blade
  • GN Shield
  • GN Beam Dagger x 2
  • GN Beam Saber x 2
Come with exclusive action base. 
This unit is release as [P-Bandai] product in Non-Asia Countries.

RM260.00
img
SAVERM109.40

MG 1/100 00 QAN[T] / Quanta Full Saber

MG 1/100 00 QAN[T] FULL SABER

- Faithfully reproduce the body shape of Double O Quanta Full Saber!
- Armor equipped with a variety of mechanisms `GN Sword IV Full Saber` is reproduced with new parts.
- The GN capacitor is mounted and the back part with the connection part with GN sword IV is reproduced by new modeling.
- A head antenna that imaged visuals drawn by Mr. Ebi Ogawa Kan Attack comes with new modeling.
- Marking seals are included, including markings for GN Sword IV Full Saber.
- Base for GN sword IV is included.

[accessories]
- GN Sword IV x 1
- GN Gamblade x 3
- GN sword V x 1
- GN sword bit
- GN shield x 1
- Display arm for arms x 1

[Product content]
- Molded article x 23
- Marking seal x 1
- Foil seal x 1
- Dry decal x 1
- Instruction manual x 1

RM220.00

Showing 1 - 30 of 190 products