• [EW-07] Gundam Sandrock Custom (Special Edition)
  
• 
  
• JAN: 4902425712628
• Weight: 230g
• Package Size: 6cm x 26cm x 19cm
• Manufactured by: Bandai

Copyright Sotsu Agency / Sunrize Weight : 333g

• From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  
• With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  
• Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  
• Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  
• Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  
• Center chest and “eye” cameras light up using included LEDs (batteries required)
  
• Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 
  
• 
  
• Accessories: Accessories: Twin Buster Rifle, Beam Saber x2
  

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

Weight: 1000g

BB-203 Wing Zero Gundam Custom Simple instruction included in a box. 

EW-1 first models of OVA Wing series. Modified version of the Altron Gundam which appears in the new OVA "Gundam Wing: Endless Waltz." Includes unpainted 1/20 scale Wu-Fei Chan figure. "Dragon Fang" pincers on the arms extend several centimeters. Simple instruction included in a box. Weight: 1000g

HG version of the Altron, the resurrected version of Shenlong. New coloring, and now both arms extend with the claw weapon. Back-mounted beam cannon, too. Everything moves. Snap-fit assembly. Colored plastic.History of Altron GundamWhen the XXXG-01S Shenlong Gundam was captured and destroyed by OZ's forces in AC 195, the extremely durable gundanium-made remains of that mobile suit were taken to OZ's lunar base and mobile suit factory for storage. The five scientists who had built the Gundams plaguing OZ were also at the lunar base, captured and forced to develop new mobile suit technology to secure OZ's rule over Earth and the space colonies. Despite their apparent "cooperation," however, the scientists also began rebuilding both the Shenlong and the XXXG-01D Gundam Deathscythe in secret, preparing for the day when captured Gundam pilots Chang Wufei and Duo Maxwell could return to the battlefield. That opportunity came when the Romefeller Foundation - the political force behind OZ - became split over a number of issues, and the "Treize Faction" of OZ attacked the lunar base, which at the time was still under the control of Romefeller loyalists. During the chaos Lady Une released both Duo and Wufei with their partially upgraded XXXG-01D2 Gundam Deathscythe Hell and XXXG-01S2 Altron Gundam. The improvements given to the Altron were dramatic. The old beam glaive was replaced with a double-ended twin beam trident, and both arms were outfitted with Shenlong's highly effective "dragon fang" extending arms and claws (hence the Altron name, taken from the Chinese "ertou long" or "two-headed dragon"). Along with increased mobility from it's "wing binders" on its back which enhances it's mobility in space, the Altron also mounted a pair of beam cannons on a "stinger tail," giving it effective ranged firepower for space combat (both the wings and tail stinger were removed in the OVA version) The new Altron was henceforth a menace to the White Fang army during the "Eve Wars". After AC 195, Wufei, wanting to see what the true meaning of justice is, took the Altron with him to the newly formed Marimeia Army instead of sending it into the Sun with the other Gundams. Wufei fought against Heero Yuy twice, once when the latter was piloting an outdated OZ-06MS Leo and the second time when Heero piloted a revived XXXG-00W0 Wing Gundam Zero. Wufei, seeing that true peace could not be achieved through Operation Meteor, rebelled against the Marimeia Army during the battle in Brussels. After the rebellion, the Altron was later self-detonated by Wufei Simple instruction included in a box. Weight: 1000g History Source: http://gundam.wikia.com

HG-grade kit of the new version of the Gundam Heavy Arms as it appears in the Gundam Wing: Endless Waltz OVA series. Includes two different versions of the face (one half-covered by a clown mask -- this will make sense to you if you've seen the show). Features two big double-barrel gattling-style guns that can be gripped in the hands or mounted on the backpack. A dozen places on this model open to reveal missiles ready to fire. Other details are typical of Bandai HG kits: Molded in color, snap-assembly, poly-caps and foil stickers for detail colors. Unpainted pilot figure, too. Simple instruction included in a box. Weight: 1000g

Wing series. Somewhat Chinese-style robot from Gundam Wing. Right arm unfolds to double-length.History of Shenlong GundamThe Gundam called Shenlong was design and constructed by Master O somewhere in the L5 colony cluster. As the Shenlong Gundam was nearing completion, Mei Lan Long (Wufei's fiance) had taken the name of "Nataku", stole a mobile suit, apparently the Tallgeese, when the colony was attacked. Nataku piloted the Tallgeese out into space with a beam cannon. The ensuing battle took its toll on Nataku and she later died in Wufei's arms. Her death caused Wufei to take up the job of piloting Shenlong against the United Earth Sphere Alliance and OZ. Throughout the series, Wufei affectionately called the Shenlong Gundam "Nataku" after his deceased wife. The Gundam's primary armament consisted of head mounted vulcans, a Japanese style "beam glaive", and a Chinese inspired extendable "Dragon Fang" integrated with the right arm. The fang itself is armed with "claws" for grappling an opponent and two flamethrowers on the sides of the dragon head. History source: http://gundam.wikia.com Simple instruction included in a box. Weight: 1000g

This model kit includes parts to build either Tall geese I, II, or III (some painting may be required due to color differences between forms). Mega Beam Cannon can open up to to reveal firing mode, while heat whip is articulated with individual segments. Two beam sabers are also included along with figure of Zechs.

The grim reaper Gundam from Gundam Wing in its characteristic navy blue and yellow color scheme. Includes two different scythe effect blades as well as smaller naginata like blade. Buster shield claws open and close and include energy blade. Extra effect parts included to simulate thrusters firing under shoulders, while scythe is coated with a metalic silver.

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

• Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  
• Uses the XXX-G Frame developed during the animation!
  
• Marking work is designed by Hajime Katoki.
  
• Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  
• New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  
• Able to reproduce the flapping from the animation naturally. 
  
• The closed state of the Active Cloak can also be reproduced with a natural form. 
  
• Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 
  

• Product name: Shenlong Gundam 
• Scale: 1/144
• No glue required for assembly, a hobby nipper is required to remove parts from runners
• Colored plastic, little to no paint required to replicate appearance
• Product bears official Bluefin Distribution logo ensuring purchaser is receiving authentic licensed item from approved U.S. retailer
• Bluefin Distribution products are tested and comply with all U.S. consumer product safety regulations and are eligible for consumer support

This highly detailed plastic kit from Bandai’s HG (High Grade) series features the iconic Wing Gundam Zero as seen in Mobile Suit Gundam Wing! The 1/100th scale kit comes pre-color molded in Zero’s characteristic color scheme and is equipped with the Twin Buster Rifle and Wing Shield.

- Accessories: Dover gun, shield, beam saber dolls Standing × 2,1 / 100 ZX Doll 1/100 ZX pilot, fist (left and right), palm (left and right), hand grip for arms (left and right) 

P-Bandai Exclusive: MG 1/100 Tallgeese III