• Home
  • Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

Showing 1 - 30 of 141 products

Quick View
img
SAVERM99.90

MG 1/100 Wing Gundam

  • The stylish form rebuilt by Katoki had been reproduced. 
  • Equipped with the wing area adjustment gimmick, with wide posing range. 
  • Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  • The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  • Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
  • - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
  • - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g

RM140.00
RM140.00 Add to cart
Quick View
img
SAVERM129.50

MG 1/100 Gundam Epyon EW

  • Gundam Epyon is newly designed in the EW version. 
  • It can be completely transformed from the MS mode into the flying mode. 
  • Thanks to "the pullout system", you can reproduce its heat rod's whip. 
  • Various gimmicks give expression to "Soryu". Its neck, mouth and hand claws are movable.
  • Includes marking stickers designed by Hajime Katoki.

RM182.00
RM182.00 Add to cart
Quick View
img
SAVERM122.00

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM171.50
RM171.50 Add to cart
Quick View
img
SAVERM104.60

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM97.10

MG 1/100 Wing Gundam EW Ver.

  • Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  • Tons of new features! 
  • Molded in updated colors as shown in EW! 
  • New package art creates a unified look for the MG Endless Waltz series! 
  • MG EW series produce a sense of a new package!
  • Marking decals designed by Hajime Katoki.
  • Parts expand for performance-based dynamic posing! 
  • Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2

RM136.50
RM136.50 Add to cart
Quick View
img
SAVERM104.60

MG 1/100 Tallgeese I EW

  • The most powerful of all the OZ Mobile Suits, the Tallgeese is presented here for the first time as a Master Grade kit! 
  • Re-interpreted by master designer Hajime Katoki as displayed in Endless Waltz, the Tallgeese, a Suit numbering among the most powerful in the After Colony timeline is finally recreated as an Mg. Designed with a complex inner frame as befitting a Master Grade Suit, this model is also equipped with a set of original marking decals created my Mr. Katoki.
  • POINT 01: Reproduction of Inner Frame
  • Inner frame is completely recreated- the Leo-style internal cameras, chest ducts, and structure are precisely reproduced. 
  • POINT 02: Deployment of back thrusters
  • Backpack thrusters are jointed for maneuverability and can be opened or closed for a variety of poses.
  • POINT 03: Deployment of lumbar thruster
  • Rear skirt thrusters equipped with deployment gimmick to enhance the action potential of this kit.
  • POINT 04: Dover Gun
  • A first for a Gundam model, the Dober Gun is equipped with a blowback gimmick activated by pulling back the bolt.
  • Accessories: Dober Gun, Shield, Beam Saber x2, 1/100 Zechs Marquise (Standing) 1/100 Zechs Marquise (Sitting), Fist (Left and Right), Open Palm (Left and Right), Weapon Grip (Left and Right)

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM41.80

[162] HG 1/144 Wing Gundam

  • Wing Gundam, the main MS of "Mobile Suit Gundam Wing" series, comes out in the newest HG format. 
  • The unique designs like the air-intakes on the chest are faithfully reproduced. 
  • The main camera and the center of the chest are made of clear material. 
  • Its distinctive wings are foldable. Dynamic action poses with open wing can be reproduced.
  • Can be transformed into the bird form. 
  • A Large-size buster rifle and two beam sabers are included. 
  • Runner x9, Foil sticker x1, Instruction manual x1 

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM44.80

[174] HG 1/144 Wing Gundam Zero

[174] Wing Gundam Zero (HGAC)

RM63.00
RM63.00 Add to cart
Quick View
img
SAVERM2.00

Third Party Brand HG 1/144 Wing Gundam Colonies Liberation Organization

HG 1/144 HG 1/144 Wing Gundam Colonies Liberation Organization


Brand : Third Party Brand
Grade : High Grade
Scale : 1/144
Model : HG 1/144 Wing Gundam

Please note that this is Not Bandai product

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM69.70

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM17.08

SD Ex-Standard Wing Gundam Zero EW

  • SD Ex-Standard XXXG-00W0 Wing Gundam Zero EW
  • SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM17.00

SD Ex-Standard Gundam Deathscythe Hell Ew

SD Ex-Standard Gundam Deathscythe Hell Ew

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM29.90

[211] HGAC 1/144 Leo

The fourth installment of the "Gunpla Evolution Project" is the HGAC 1/144 Leo from "Gun dam Wing"! 

The Leo is a mass-produced MS named after the "Leo" constellation. Emphasis has been placed on this kit's ease of assembly, making it easier for fans to collect and build multiple kits! 

The new joint structuring on this kit allows for a wide range of articulation and shortens the time required for assembly. The joints can also be fitted later, making the process easier for those who enjoy customizing and painting their kits. 

The arrangement of the runners have also been reorganized by grouping the parts together to aide in an easy visualization of the kit's construction such as "leg parts" or "arm parts" in proximity of each other. 

In addition to ease of assembly, the HG 1/144 Leo also recreates designs and precise details that have been added to this new format such as the usage of clear parts instead of stickers on the main camera on the head. 

A drum gun, beam sabers, and shield and included and can be stored I the back of the shield. 

Combine this with other HGAC kits such as the "HGAC 1/144 Wing Gundam".

- Accessories
  • Drum Gun x 1
  • Beam Sabel x 2
  • Shield x 1

- Product content
  • Molded parts x 5
  • Instruction manual x 1

RM42.00
RM42.00 Add to cart
Quick View
img
SAVERM136.90

MG 1/100 Wing Gundam Zero EW Ver. Ka

? From [New Mobile Report Gundam W Endless Waltz], Wing Gundam Zero EW Ver.Ka has appeared under the full supervision of Mr. Hajime Katoki!
? Bandai Spirits has announced the release of the new Wing Gundam Zero EW in Version Ka form! 
? This kit will be packed with amazing detailing and of course, decals. 
? Specially designed by Katoki Hajime himself, the kit will offer variety of new molded parts compare to its previous MG version that was released back in 2004.


Accessories included / Package Content: 
? Twin Buster Rifle x1
? Beam saber x 2
? Shield x 1
? Pedestal x 1
? Foil seal x 1
? Water transfer type decal x 1

RM192.50
RM192.50 Add to cart
Quick View
img
SAVERM17.00

SD Ex-Standard Wing Gundam Zero

Wing Gundam Zero is now available in a completely new model from SD-EX!
[accessories]
  • Twin Buster Rifle x 1
  • Beam saber x 1
  • Shield x 1
  • Foil seal x 1

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM159.40

Daban 8827 MG 1/100 Snow White Prelude Wing Zero Gundam

Daban 8827 MG 1/100 Snow White Prelude Wing Zero Gundam

Brand : Daban
Code : 8827
Grade : Master
Scale : 1/100
Model : Snow White Prelude Wing Zero Gundam

Please note that this is NON-Bandai product

RM200.00
RM200.00 Add to cart
Quick View
img
SAVERM42.30

[242] HG 1/144 After Colony Shenlong Gundam

Chang Wufei's Shenlong Gundam from "Mobile Suit Gundam Wing" gets a new HGAC model kit from Bandai! A movable shaft inside the chest unit allows natural lateral bending, as well as forward-and-backward bending. The cockpit block can move up and down when the robot bends back and forth. Slide joints in the shoulders improve the range of motion for more dynamic poses! Arm extension parts can be attached to reproduce the "Dragon Hang" weapon's full extension! Interchangeable hands are also included, as are a shield and a Beam Glaive. Order this distinctive Gundam for your own collection today!

[Includes]:

* Beam Glaive
* Shenlong Shield
* Interchangeable hands (left and right, x3 each)
* Dragon Hang expansion and contraction joint (x2)
* Stickers

RM59.50
RM59.50 Add to cart
Quick View
img
SAVERM104.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM2.00

Third Party Brand HG 1/144 Wing Gundam

HG 1/144 HG 1/144 Wing Gundam


Brand : Third Party Brand
Grade : High Grade
Scale : 1/144
Model : HG 1/144 Wing Gundam

Please note that this is Not Bandai product

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM4.00

Entry Grade 1/144 Wing Gundam

The Wing Gundam from "Mobile Suit Gundam Wing" is now available in Bandai's "Entry Grade" model-kit lineup, which combines ease of assembly with high quality!

Various weapons are included.
No stickers are required! The sophisticated parts division allows you to recreate its distinctive color scheme just by assembling it.
This model kit features excellent mobility while keeping the number of parts to a minimum! You'll be able to pose it freely after assembly.
The parts feature a touch-gate design that can be easily removed from the gates by hand, without using pliers.


Order yours today!

[Includes]:

* Buster rifle
* Shield

RM38.00
RM38.00 Add to cart
Quick View
img
SAVERM6.00

Gao Gao Brand MGSD Wing Gundam Zero EW (Non-Bandai)

GL Brand MGSD Wing Gundam Zero EW (Non-Bandai)


Brand : Gao Gao
Model : Wing Gundam Zero EW
Grade : MGSD
Action base 5 and Water decal is included

Please note that this is Non-Bandai product

RM59.00
RM59.00 Add to cart
Quick View
img
SAVERM103.60

[043] RG 1/144 Wing Gundam Zero (Colonies Liberation Organization Mobile Suit XXXG-OOWO)

Wing Gundam Zero is three-dimensionalized with a completely new design! The Wing Binder is the key to overwhelming mobility and flight ability, and is equipped with an original gimmick unique to RG!

 The joint part of the Wing Binder is equipped with a 5-axis movable point, realizing flexible posing.
 The vernier inside the Wing Binder has a built-in interlocking gimmick that rotates the unit, extends the internal nozzle, and deploys the fins at the same time.
 By rearranging the parts, it can be transformed into Neo Bird form. Equipped with a transformation gimmick of the leg tip that imagines the play.
 The shoulder armor deploys to expose the vernier. The beam saber can also be stored.
 In addition to the cockpit hatch, the chest intake cover can be opened and closed.
 The machine cannon deploys by opening and closing the cover on the top of the chest intake.
 The hip joint is equipped with two swing axes that can move independently. By sinking the waist, more flexible posing is possible.
 Equipped with a gimmick that deploys the knee armor and shin armor in conjunction with the bending of the knee. Smooth bending of the knees is achieved.
 Twin Buster Rifle can be combined/separated. The barrel extends and retracts as an original RG gimmick, creating a powerful effect when firing.
 The shield features an extendable nose block and an original RG gimmick of interlocking small wings.
 A locking mechanism is installed in the weapon handle, increasing the holding power when holding the Twin Buster Rifle.

[Accessories]
  • Twin Buster Rifle x 1
  •  Beam Saber x 2
  •  Shield x 1
  •  Hand parts x 1 set
  •  Realistic decal x 1

RM148.00
RM148.00 Add to cart
Quick View
img
SAVERM10.00

GL Brand MGSD Wing Gundam Zero Snow White (Non-Bandai)

GL Brand MGSD Wing Gundam Zero Snow White

Brand : GL
Model : Wing Gundam Zero Snow White
Grade : MGSD

Please note that this is Non-Bandai product

RM68.00
RM68.00 Add to cart
Quick View
img
PO PriceRM120.00

Gundam Universe XXXG-01D2 Gundam Deathscythe Hell (EW)

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  APR 2024
Estimate arrival : MAY 2024

- P-O Price RM320
- Deposit RM100, Balance RM220
- We will inform to make balance RM 220 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The majestic Gundam Deathscythe Hell from "Mobile Suit Gundam Wing: Endless Waltz" is joining the "Gundam Universe" action-figure series from Bandai! Its impressive Beam Scissors weapon is included, as is its distinctive cloak. It's fully posable for maximum action -- you need this incredible figure in your collection, so order yours today!

[Figure Size]: Approximately 15cm tall
[Materials]: ABS, PVC

[Set Contents]:
- Main figure
- Interchangeable weapon-holding hands (x1 each, left and right)
- Beam Scissors
- Effects for Beam Scissors
- Tamashii Stage exclusive joint (Tamashii Stage is not included)

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM160.00

Gundam Universe XXXG-00W0 Wing Gundam Zero (EW) Renewal

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2026
Estimate arrival : NOV 2026

- P-O Price RM160.00
- Deposit RM30.00, Balance RM130.00
- We will inform to make balance RM130.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The Wing Gundam Zero, which played a pivotal role in \"Mobile Suit Gundam Wing: Endless Waltz,\" joins Bandai\'s \"Gundam Universe\" series as a renewed edition! This figure incorporates the Universal Reaction Frame to pursue the optimal range of articulation and playability necessary to faithfully recreate scenes from the anime! It captures the suit\'s distinctive design while balancing ease of posing with a stylish aesthetic.

The Twin Buster Rifle is included, allowing for the recreation of iconic scenes from the series; thanks to a pull-out mechanism in the shoulders, the mech can be posed holding the weapon with both hands, as seen on screen. Its massive wings feature movable joints, allowing you to adjust their positioning to add dynamic expression to its poses! The Beam Sabers are also included.

Height : 15cm
Materials: PVC, ABS
Contents : 
- Main figure
- Interchangeable hands (left and right, x3 each)
- Twin Buster Rifle
- Beam Saber (x2)
- Beam Saber effect parts (x2)
- Set of joint parts

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
Quick View
img
PO PriceRM390.00

[PRE-ORDER] The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Color Version)

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : JUN 2022 
Estimate arrival : JULY-AUG 2022

- P-O Price RM390.00 
- Deposit RM100, Balance RM290.00 
- We will inform to make balance RM 290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Version)

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
Quick View
img
SAVERM52.00

[Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)

MG 1/100 Nataku/ Altron Gundam from Super Nova (Blue Version)


- MG 1/100 Altron (Blue Version)
- From Super Nova
- Pre-painted plastic, no paint required.
- Self assembly required

Kindly note that this kit is a NON-BANDAI product.

RM148.00
RM148.00 Request Stock
Quick View
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM34.90

[223] HGAC 1/144 Maganac

- From the TV anime [New Mobile Suit Gundam Gundam W], general unit of the MS unit Maguanac team composed of 40 units is three-dimensionalized with HGAC!

- Based on the concept of [Fine Build], adopt a structure pursuing ease of assembly.
- Shield for backpack, Heat Tomahawk for mount at the waist.
- Shoulder armor 's flip up gimmick.

[accessories]
Beam rifle x 1
- Heat Tomahawk x 1
- Shield x 1

[Product content]
- Molded parts x 6
- Foil seal x 1
- Marking stick x 1
- Instruction manual x 1

RM49.00
RM49.00 Request Stock
Quick View
img
SAVERM19.90

[13] SD Gundam Cross Silhouette Wing Gundam Zero EW

-The [Wing Gundam Zero EW] has appeared from the SDCS series that is particular about [color reproduction, detail modeling, movable]!

-Due to the high movable specification, the characteristic posing in the play can be reproduced!
-The Twin Buster rifle shooting pose can be reproduced with the SD frame.
-By moving the arm and closing the wing, you can reproduce the atmosphere rush pose.
-The head is rearranged, and the presence or absence of the pupil is selected.
-A twin-buster rifle that can be combined and separated is included. It can be held in both hands in a separated state.
-By linking with the CS frame (sold separately), more detailed expressions are possible, and you can enjoy it with your favorite proportions.

[accessories]
-Twin buster rifle x 1 set
-Foil seal x 1

RM40.00
RM40.00 Request Stock

Showing 1 - 30 of 141 products