Price Clear







Showing Gundam Model Kits + MS ZETA / ZZ GUNDAM product(s)

Showing 61 - 90 of 162 products

img
SAVERM64.30

MG 1/100 RX-178 Gundam Mk-II Titans

RX-178 Gundam Mk-II Titans

RM103.60
img
SAVERM59.90

MG 1/100 MSZ-006C1 Zeta Plus C1

  • MSZ-006C1 Zeta Plus C1
  • Equipped with trademark Beam Smart Gun.
  • Able to transform into Wave Rider mode, this kit uses ABS and screws to ensure proper joint connections.
  • Backpack equipped with propellent tank.
  • Rear wings completely adjustable for a variety of poses
  • Accessories: Beam Smart Gun, Hip Beam Cannon x2
  • Item Size/Weight : 33 x 24.2 x 12.5 cm / 800g

RM120.00
img
SAVERM35.40

[041] HGUC 1/144 MSZ-006 Zeta Gundam

HGUC MSZ-006 Zeta Gundam 1/144

RM60.50
img
SAVERM99.80

MG 1/100 MS-06K Zaku Cannon

  • Designed on the basic inner structure of the high-performance Zaku II Ver. 2.0 for maximum dynamic potential! 
  • Cannon Pack is removable, and features detailed connection points, including the bolts and clamps securing the pack.
  • Recreate the dynamic firing pose! 
  • Rocket Launcher mounted at the rear waist.
  • Cockpit hatch system differs from previous Zaku Suits, setting the Zaku Cannon apart! 
  • Includes two styles of antenna, allowing you to make this Suit your own. 
  • Various unique marking decals included to replicate the look of the Suit’s appearance in MSV.
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Cannon Pack x1, 1/100 Pilot Figure x2, Antenna x2, Action Base Joint x1

RM170.10
img
SAVERM82.90

MG 1/100 RX-178 Gundam Mk-II Ver.2.0 (TITANS)

  • RX-178 Mk-II Ver.2.0 Titans
  • We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
  • Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
  • The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!

RM126.00
img
SAVERM99.90

MG 1/100 Zeta Gundam Ver.2.0

  • Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  • It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  • Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  •  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  • However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).

RM200.00
img
SAVERM95.90

MG 1/100 RX-178 Gundam MK-II Ver.2.0 (A.E.U.G)

The Gundam Mk 2 Ver 2.0 from "Zeta Gundam" features styling and engineering found on the previously released larger PG Gundam MK 2, but shrunken down and refined. Includes beam rifle, bazooka, beam sabers, ammo, shield that can retract and optional head Vulcans. A display hangar for recreating launching and maintenance scenes is included for the AEUG version.

RM144.00
img
SAVERM102.90

MG 1/100 FA-010S Full Armor ZZ Gundam

  • MG FA-010S Full Armor ZZ Gundam

RM228.00
img
SAVERM68.30

MG 1/100 Zeta Gundam

  • Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam

RM111.60
img
SAVERM28.90

[011] HGUC 1/144 AMX-004-2 Qubeley Mk-II

The very-popular Qubeley is now available in the Mk-II style, which is basically just a color variation from the original release. You also get that cool Neo Zeon mark on the shoulder. Molded in color, snap assembly. Poly-caps for the joints.Technology & Combat CharacteristicsIn terms of technology and performance the two Qubeley Mk-II units were virtually identical to the original Qubeley. The Qubeley Mk-II's stored an additional two remote funnel weapons in the tail binder over its predecessor, giving the mobile suit a total of twelve remote weapons. The one noticeable difference between the two identical Qubeley Mk-II's is the different color schemes. The first AMX-004-2 Qubeley Mk-II which featured a dark purple color scheme and a hilted beam saber. The second unit, AMX-004-3 Qubeley Mk-II, was largely identical to the first, but instead had a red-and-yellow paint scheme. Of course since the Qubeley Mk-II mobile suits were designed for Newtype pilots they were outfitted with the same miniaturized psycommu system of the first Qubeley so that the pilots may control the remote weapons with their Newtype abilities. One major differences between the two mobile suits psycommu systems, was that AMX-004-3 Qubeley Mk-II would have a new version of the psycommu system installed that would allow its pilot, through the use of a psycowave amplifying headset, to remote-control the mobile suit from outside the cockpit. The head parts of the Qubeley MK-II features a psywave sender/reciever, and also features a system that gives feedback to the pilot, a system never seen in other Newtype use MSs. The head is also crafted to act as a stabilizer in flight, thus the odd shape. The shoulder armor of the Qubely MK-II features 12 thrusters to give it exceptional mobility and speed. The binders also act as shields. They also help the Qubeley MK-II'S AMBAC system. The fingers of the MK-II also mount the same psywave sender/reciever system as the head, and can directly give the funnels instructions. The legs of the MK-II are used as landing gear and for walking. They feature thrusters as standard equipment that allow the MK-II to maneuver in space and in the atmosphere.Sources:wikipedia

RM60.00
img
SAVERM78.20

P-Bandai: HGUC 1/144 Zssa

P-Bandai: HGUC 1/144 Zssa [REISSUE]

Release Date: August, 2018
Estimate Delivery Date: September, 2018

RM141.80
img
SAVERM30.00

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts


Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM100.00
img
SAVERM17.90

[05] SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM

SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM


- Zeta Gundam, the protagonist of [Mobile Suit Z Gundam] appears in the series that can enjoy two silhouettes [SD Gundam Cross Silhouette] series!

- Reproduce distinctive coloring.
- Combined with [SD Gundam Cross Silhouette Frame] (sold separately), it is possible to upgrade high head and improve mobility.
- [Z Zaku] that appeared in [ZZ Gundam] in combination with [SD Gundam Cross Silhouette Zaku II] can be reproduced.

- accessories
Beam rifle x 1
* Shield (grenade launcher) x 1
* Beam * saber x 1

- Product content
* Molded product x 3
* Foil seal x 1
* Instruction manual x 1

RM42.00
img
SAVERM51.70

[214] [HGUC 1/144 Byarlant

HGUC 1/144 Byarlant


One of the last mobile suits from the Zeta Gundam series finally makes an appearance! Using new parts for the head and various armor sections, its color separation allows recreation of many fine detailed areas. 

Accessories:
Beam  saber x 2

Product content:
- Runner x 15
Foil sticker x 1
Instruction manual x 1

RM104.00
img
SAVERM46.00

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf

[Daban] MG 1/100 Gundam Gray Zeta Fighter III B Type Yellow Wolf


- This is a Non-Bandai product.
- Master Grade 1/100 Scale.
- Included launching action base and water decal.
- Transformable kits.

The MSZ-006-3B Zeta Gundam 3B Type (also "Gray Zeta") is a variant of the MSZ-006 Zeta Gundam piloted by former Zeon ace Shin Matsunaga (codename "Gray Wolf"), who calls it "Buster", and appears in the Gundam Evolve 9 CGI episode where it engages in battle with the QRX-006 Geminus, assisted by two other Zeta units.

RM99.00
img
SAVERM35.80

[219] HGUC 1/144 DIJEH

The HGUC Dijeh, as seen in "Zeta Gundam," is a completely new-tool kit! It's fully posable after easy assembly, and comes with its Beam Rifle, Clay Bazooka and Beam Naginata, as well as hands to wield them with. The Clay Bazooka and Beam Rifle can be worn on the left and ride side of its binder respectively; the Clay Bazooka can also be equipped onto the weapons rack on its left shoulder.


Accessories:

- Beam Rifle
- Clay Bazooka
- Beam Naginata

RM78.00
img
SAVERM48.00

P-Bandai: HGUC 1/144 Gaz-R/L set (Set of 2)

P-Bandai: HGUC 1/144 Gaz-R/L (Set of 2)
Release Date : Feb 2019

Estimate Delivery : March 2019

RM230.00
img
SAVERM75.00

P-Bandai : HG 1/144 Gundam TR-6 [Hazel II] [Reissue]

P-Bandai : HG 1/144 Gundam TR-6 [Hazel II]

From the Advance of Zeta: The Flag of Titans comes a High Grade model kit of the TR-6 [Hazel II]! Based on variation of the Gundam TR-6 Woundwort, this 1/144 scale model includes a display stand and does not require glue.

Product Features

  • 1/144 Scale
  • Made of PS, PE, and PVC
  • Part of the High Grade series
  • Exclusive model kit of TR-6 Hazel II from Advance of Z
  • Does not require glue!

Box Contents

  • Pieces to build Gundam TR-6 [Hazel II]
  • Composite shield booster
  • Beam rifle
  • Arm reinforced parts (shield)
  • Display stand

RM145.00
img
SAVERM20.00

P-Bandai: MG 1/100 GM Cannon [Red Head]

Bandai Spirits announced the release of the Premium Bandai MG GM Cannon in Jaburo Defense Force colors from Mobile Suit Z Gundam series!

The kit is based on the MG 1/100 GM Ver. 2.0 that includes parts for the GM Cannon.
This version also comes with "'The Immortal 4th Team' Color" red arms for its variation.

A sheet of water slide decal is also provided for detailing.

[ACCESSORIES]

  • 240 mm rocket cannon
  • Beam spray gun
  • Hyper bazooka
  • Beam rifle
  • Shield

RM260.00
img
SAVERM40.00

P-Bandai: MG 1/100 Dwadge [ZZ Ver.]

P-Bandai: MG 1/100 Dwadge [ZZ Ver.]

[ACCESSORIES]
  • Giant Bazooka
  • Heat Tomahawk
  • Heat Saber
The Mobile Suit Gundam ZZ version of the Dwadge was finally revealed and will join the Master Grade series in April 2019 as initial release by Premium Bandai.

Molds and joints of the MG 1/100 Dom has been updated to accommodate the design of Dwadge. With extended articulation and new molds for its joint parts, this will surely look good beside your collection!

Head
  • Dom's head design has been remolded to produce Dwadge's head vulcans.
Body
  • Power pipes on its shoulder connecting from its chest to the backpack were added to the molds!
Backpack
  • The entirely new mold of the backpack surely is packed with details and equipped with joints to store some of Dwadge's weapons.
Rear Skirt Armor
  • Dwadge will not be complete without its rear skirt vents which has been remolded entirely from the MG Dom.
Legs
  • Legs were also reshaped to accommodate the drop tanks on it.
Equipment
  • Added details to the Giant Bazooka's barrel.
  • A double edged heat tomahawk is also a new sight for this kit!
  • A remolded heat saber's hilt for a better stability.

RM310.00
img
SAVERM820.00

GUNDAM FIX FIGURATION METAL COMPOSITE Psycho Gundam (Gloss Color Ver.)

GUNDAM FIX FIGURATION METAL COMPOSITE Psycho Gundam (Gloss Color Ver.)
Release Date: September 2019
Estimate Delivery: Oct 2019

[ACCESSORIES]

  • Dedicated Base

RM1280.00
RM1280.00 Request Stock
img
SAVERM70.00

P-Bandai: HGUC 1/144 GM II A.E.U.G. Color Ver

P-Bandai: HGUC 1/144 GM II A.E.U.G. Color Ver 


Release Date: Sept 2019
Estimate Delivery: Nov 2019

RM130.00
img
SAVERM70.00

P-Bandai: MG 1/100 Gundam TR-1 [Hazel II] / Hazel Reserve Unit/ GM Quel

Gundam TR-1 Hazel II [Early Type Unit] - The early type unit comes with white armor pieces for its head, cheek vents, and wrist parts. 

TRI-BOOSTER - An entirely new mold is provided to make the Hazel II's backpack, tri-booster unit.

GM Quel [Hazel Reserve Unit] - Convert the GM Quel into its Hazel Reserve Unit variant by adding Hazel II's head to the kit.

[ACCESSORIES]
-Beam Rifle
-GM Rifle
-Shield
-Beam Saber

RM280.00
img
SAVERM30.00

P-Bandai: HGUC 1/144 Gundam TR-1[Hazel Custom] & Expansion parts for Gundam TR-6

Kit includes a unit of  HGUC 1/144 Gundam TR-1 Hazel Custom and conversion parts of Gundam TR-6 Woundwort to make its Gaplant II variant.

[ACCESSORIES]
Beam Rifle
Beam Saber
Shield
Shield Booster 
*HGUC 1/144 Hrududu extension part is sold separately
*HGUC 1/144 Gundam TR-6 Woundwort sold separately
*HGUC 1/144 Gaplant Hrairoo sold separately

RM115.00
img
SAVERM30.00

P-Bandai : HGUC 1/144 Gundam TR-1 [Advanced Hazel] & Expansion Parts for Gundam TR-6

With additional new parts,

HG Gundam TR-1[Advanced Hazel], Attack !!

From [ADVANCE OF Z : The Flag of Titans],
"HG 1/144 Gundam TR-1[Advanced Hazel]" is released with expansion parts for "Gundam TR-6".
Joint parts have changed from ABS to KPS.

- Joint parts changed to KPS
     Joint parts changed to KPS to improve paint efficiency.

- Reproduce Hazel-Rah"second form" by combining it with an item sold separately
     Combine this product unassembled with an item sold separately to reproduce "RX-121-1+FF-X29A Gundam TR-1[Hazel-Rah]"second form".

1. HG Gundam TR-1[Advanced Hazel] & Expansion Parts Set For Gundam TR-6 "This product" "unassembled"
2. HG Gundam TR-1[Hazel Custom] & Expansion Parts Set For Gundam TR-6 "Sellout item of PREMIUM BANDAI"
3. HG G parts[Hrududu]"Combat Deployment Colors" x2 "Sellout item of PREMIUM BANDAI"


     * Some painting is required to reproduce the color.
     * An unassembled HG 1/144 Gundam TR-1[Advanced Hazel] is required to reproduce Gundam TR-1[Hazel-Rah] "second form".

-   Water slide decals of designated emblem included
Its characteristic emblem reproduced with water slide decals.

-    Includes newly molded "Expansion Parts Set For Gundam TR-6"
     Includes a set of expandable option parts for reproducing some of the TR series -  suit variations by combining it with "HG 1/144 Gundam TR-6" (sold separately).

Combine it with parts from the compatible kit to reproduce variations such as "RX-124 Gundam TR-6[GaplanII]" !
   
* An HG series 1/144 scale recommend kit (sold separately) is required to reproduce [RX-124 Gundam TR-6[GaplanII]].
* Some painting is required to reproduce the color of the TR series'suit variation.

**For more information about combinations of [GaplanII], please refer to the product image or the feature page.**


Weapons:  Beam Rifle / Beam Saber / Shield / Shield Booster
_______________________________________________________________________________

1/144 scale assembly plastic model
-No adhesives required for assembly
_______________________________________________________________________________

* The product in the picture is painted and is a prototype in development. Actual products may differ from the images.
 
(Notes)
  • This product cannot be found in model kits shops.
  • This product may be on sale in events or other projects held by our company.
  • Only a limited number of this product is available at 'PREMIUM BANDAI'. We apologize if we are out of stock on this product.
  • Please note that for this product, due to the number of produced units, we are limiting the quantity available in each order.
  • For this product, the shipping date is subject to change in some cases depending on application status and production circumstances,
Thank you for your understanding.
  • Product images are in development stage. They may differ from the actual products.
  • The product specifications are current as of February 2019. We ask for your understanding as they may be subject to change.

RM115.00
img
SAVERM110.00

P-Bandai HG1/144 Gundam TR-6 [Haze'n-Thley II] (Advance of Z The Flag of Titans)

P-Bandai HG1/144 Gundam TR-6 [Haze'n-Thley II] (Advance of Z The Flag of Titans)

[ACCESSORIES]
  • Composite Shield Booster
The Haze'n-thley II appears in its blue color version! The kit is ready be combined with its G-Part, HRUDUDU II (sold separately) to make its "Rah" variant.

The kit features a transformation gimmick that turns the mobile suit into mobile armor.

This kit uses the same drum-frame used by the Gundam TR-6 Woundwort, which is provided to act as its core and used for its upper and lower body. In addition, the optional parts for its whole body such as exterior armors are reproduced with an entirely new mold.

Enjoy the MS in variety of poses, with provided extended articulation and durable joints to accommodate its large moving parts along with its armaments.

RM270.00
img
SAVERM30.00

HG 1/144 Gundam TR-6 [Haze’n-Thley Ⅱ Rah] (Advance of Z The Flag Of Titans) [Clear Color]

HG 1/144 Gundam TR-6 [Haze’n-Thley ? Rah] (Advance of Z The Flag Of Titans) [Clear Color]

RM338.00
img
SAVERM81.00

DABAN 8801 MG 1/100 MG GUNDAM ZETA 2.0

Daban MG 1/100 Zeta Gundam Ver.2.0 

 Brand : Daban 
Code : 8801
Series : ZZ Gundam 

 Please note that this is not Bandai Product.

RM99.00
img
SAVERM91.70

Daban 8817 MG 1/100 RX-178+FXA-05D Super Gundam MK-II AEUG Full Armor MB ver.

RX-178+FXA-05D Super Gundam is a mobile suit in the series Mobile Suit Zeta Gundam. Piloted by Emma Sheen, it is the combination of the FXA-05D G-Defenser and the RX-178 Gundam Mk-II.

Content :
  • Body Unit
  • Riffle
  • Bazooka
  • Shield
  • FXA-05D G-Defenser
  • Long Riffle
  • Stand Base
  • Sticker Foil
  • Water Decal
  • Black wire

RM118.00
img
SAVERM20.00

P-Bandai HGUC 1/144 Barzam [AOZ Re-Boot Version]

Premium Bandai continues their collaboration with the AOZ model kit series by releasing the Barzam\'s AOZ Re-Boot version! This kit shares some of its molds to the regular retail release version of its variant, Barzam.

The AOZ Re-Boot version comes with at least 80% newly molded parts which includes its modified shoulders, chest, and leg part units and more to represent this variation.

Adding this kit to the AOZ lineup makes the kit compatible to most of AOZ model kit expansion units that were already released.

The kit is also completed with its original weapons and equipment, that includes a beam rifle, two beam sabers, and a vulcan pod.

RM150.00

Showing 61 - 90 of 162 products