Price Clear







Showing Gundam Model Kits + MS ZETA / ZZ GUNDAM product(s)

Showing 1 - 30 of 167 products

img
SAVERM400.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM700.00
RM700.00 Add to cart
img
SAVERM69.70

[008] RG 1/144 RX-178 Gundam MK.II (A.E.U.G)

"RX-178 Gundam MK-II", the legitimate successor of ""RX-78 GUNDAM"", appears as the seventh RG model. 
The newly adopted "advanced MS joints" enable to expand the range of motion. 
The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
Many gimmicks of the RG "real system""can be found such as the opening and closing of the cockpit hatch and more. 
The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
Gundam MK-II (Titans) is also released at the same time. 
runner x11, realistic decal x1, instruction manual x1

RM98.00
img
SAVERM74.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade x 2, beam saber x 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM105.00
RM105.00 Add to cart
img
SAVERM47.80

[003] HGUC 1/144 AMX-011 Zaku III Custom

HGUC 003 ZAKU III Custom


The AMX-011 Zaku III is a Mobile Suit developed by Neo Zeon as the successor to the Principality of Zeon’s MS-06 ZAKU II.

The AMX-011 Zaku III features a simplistic, versatile design with the ability to utilize optional equipment packs to serve various combat roles. Approximately 33% larger than its predecessor, it benefits from drastically improved power output and acceleration, showcasing the rapid advancements in Mobile Suit production discovered in the decade following the One Year War.

RM60.00
img
SAVERM59.80

[173] HGUC 1/144 Doven Wolf

  • Mobile Suit Gundam ZZ’s Doven Wolf appears as an HGUC kit at last! 
  • Appearing in MS Gundam UC and MS Gundam ZZ, the Doven Wolf’s iconic design has been updated for the HGUC line! Recreated using the latest in Gundam technology, the Doven Wolf features accurate colors and play gimmicks, such as the INCOM.
  • Forearm and chest design faithfully recreated from the original ZZ version of the Suit.
  • Accessories: Beam Saber x2, Mega Launcher, Hidden Beam Saber Arm x2 (Left, Right),
  • Anti-Ship Missile x2, Stand x2, INCOM Unit x2

RM84.00
img
SAVERM77.60

MG 1/100 RMS-099 Rick Dias

MG 1/100 RMS-099 Rick Dias


Brand : Bandai
Grade : Master Grade
Scale : 1/100
Model : Rick Dias

RM156.00
RM156.00 Add to cart
img
SAVERM37.94

[194] HG REVIVE 1/144 Gundam MK-II (Titans)

  • The fifth HG REVIVE release is the Titans' black Gundam Mk-II from Mobile Suit Zeta Gundam! 
  • Just as posable as the AEUG version, this Titans release features parts and decals in their color scheme. 
  • Te-tron stickers for unit number markings 1-3 are also included.

RM52.00
img
SAVERM249.00

HG 1/144 PSYCHO GUNDAM Mk-II

  • The Psycho Gundam Mk-II, the largest in the series and the last of the main MS from Mobile Suit Z Gundam, has been made into a HG figure!!
  • Approximately 270mm tall. Impressive size.
  • Can transform into Mobile Fortress state.
  • Detailed color coding is reproduced by dividing the parts.
  • Includes Action Base 4 and Weapon Display Base. Allows you to display it as it appears in the movie.
  • Includes a half-destroyed head part based on a scene from the movie.

[Accessories]
  • 1 x Shield
  • 1 x Head (half-destroyed state)
  • 2 x Arm lead units
  • 1 x Reflector bit (stored state)
  • 1 x Reflector bit (deployed state)
  • 1 x Beam effect
  • 1 x Action Base 4
  • 1 x Weapon Display Base
  • 1 x Sticker

RM350.00
RM350.00 Add to cart
img
SAVERM149.40

MG 1/100 ZZ Gundam Ver.Ka

MG 1/100 ZZ Gundam Ver.Ka



- The long-awaited MG Double Zeta Gundam Ver.Ka finally appeared!

- A wide range of motion of each part and installation of a core / block system, realization of deformation to each form!
- Shoulder joints are provided with multiple movable axes, securing a movable range that can reproduce action pauses like Double Zeta Gundam.
- The knee joint makes full use of the latest know-how, reproducing deep [bending] while reproducing complex deformation.
- By adopting the 3 axis structure which was not so far in the lumbar region, it is possible to [twist of waist] [bend forward] while having the deformation function.
- It can be transformed into each form such as G Fortress. Adjust the structure and shape of each part to the limit, pursue a form that seems to be aircraft that eliminated the remnants of humanoids.
- Two core fighters are included, and the union scene of the opening can be reproduced.
- Added [Extra Finish] processing to some parts, adding a dignified feeling that can not be produced with molded articles alone.
- By placing lining parts in places without frames, high detail appearance is realized even when deformed.

- accessories
* Double beam . rifle x 1
 Hyper . Beam . Saber x 2
 Hand grip (right and left) x 1 each
 Saber hand (left and right) x 1 each
 Hand for transformation (right and left) x 1 each
*  Weapon possession (right) x 1

- Product content
 Molded article x 17
 Foil seal x 1
 Water transfer type decal x 1
 Instruction manual x 1

RM210.00
RM210.00 Add to cart
img
SAVERM82.00

[Daban] 6648 MG 1/100 Hyaku Shiki

[Daban] 6648 MG 1/100 Hyaku Shiki


Brand : Daban
Scale : MG 1/100
Model Code : 6648
Gold Plating Version

Note : Please note that this is not Bandai Product

RM118.00
RM118.00 Add to cart
img
SAVERM47.30

[219] HGUC 1/144 DIJEH

The HGUC Dijeh, as seen in "Zeta Gundam," is a completely new-tool kit! It's fully posable after easy assembly, and comes with its Beam Rifle, Clay Bazooka and Beam Naginata, as well as hands to wield them with. The Clay Bazooka and Beam Rifle can be worn on the left and ride side of its binder respectively; the Clay Bazooka can also be equipped onto the weapons rack on its left shoulder.


Accessories:

- Beam Rifle
- Clay Bazooka
- Beam Naginata

RM66.50
img
SAVERM119.50

[235] HGUC 1/144 Bound-doc

A large mobile armor with a total height of about 190mm from [Mobile Suit Z Gundam] is now available in the HG latest format
Express the characteristic coloring with molding color
The characteristic skirt structure is reproduced by the calculated parts composition and color coding

[Accessories included]
- Beam Rifle x 1
- Beam saber x 1
- Diffusion mega particle cannon x 1
- Exclusive pedestal x 1
- Foil seal x 1

RM180.00
RM180.00 Add to cart
img
SAVERM23.00

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Brand : Daban
Scale : MG 1/100

Please note that this is not Bandai product

RM115.00
RM115.00 Add to cart
img
SAVERM200.00

METAL BUILD ZETA GUNDAM

Introducing the latest alloy transformable finished product "METAL BUILD ZETA GUNDAM" by a group of talented creators.

The latest alloy transformable finished product "ZETA GUNDAM" has been released by a luxurious lineup of creators, with Naka Morifumi, who served as mechanical animation director for "Mobile Suit Gundam Z (Zeta) A New Translation" as styling advisor. In addition to the beautiful wave rider form reminiscent of the movie, experience the "new translation" ZETA GUNDAM unique to METAL BUILD, which incorporates many new attempts such as the telescopic/suspended beam rifle and the deployment of the calf thruster covers.

Height : Approx. 190mm
Material : PVC, ABS, Die-Cast

Content : 
- Main body
- 4 pairs of interchangeable hands
Beam saber blade × 2
- Beam saber bundle x 2
- Beam Rifle
- Shield
- Joint parts/auxiliary parts set
- Grenade cartridges × 2
- Replacement movable antenna
- Replacement non-movable antenna
?- Dedicated pedestal set

RM1800.00
RM1800.00 Add to cart
img
SAVERM5.20

Third Party Brand HG 1/144 TR-6 Gundam (Woundwort)

Third Party Brand HG 1/144 TR-6 Gundam (Woundwort)


Brand : Third Party Brand
Grade : High Grade
Scale : 1/144
Model : Gundam TR-6

Please note that this is NON-Bandai product

RM29.80
img
SAVERM75.60

Figure-rise Standard Ple Two

  • From Mobile Suit Gundam ZZ, Ple Two in his pilot suit has been recreated in Figure-rise Standard!
  • A helmet or headgear can be attached to the head. Facial parts
  • can also be rearranged. 
  • The helmet visor can be removed.
  • Two types of chest parts are included:  open collar and normal.
  • Facial expressions are reproduced with one type of tampo-printed part and two types of parts for water-transfer decals.

[Accessories]
  • Facial parts (tampo-printed) x 1 type
  • Facial parts (water-transfer decal) x 2 types
  • Helmet x 1
  • Head part with headgear x 1
  • Handgun x 1
  • Chest parts x 2 types
  • Hand parts x 1 set
  • Water-transfer decal x 1
  • Sticker x 1

RM152.00
RM152.00 Add to cart
img
SAVERM59.80

HG 1/144 Galluss-J

From Mobile Suit Gundam ZZ, the long-awaited Gallus J has been made into a HG model, recreating its characteristic form and armament!

Includes the energy gun, which is a weapon unique to Gallus J.
The head can be changed to change the line of sight
by replacing the mono-eye part. The shoulder missile hatch can be recreated in its deployed state by replacing parts.
The arms can be recreated in its arm punch state by replacing parts.
The beam saber grip can be suspended from the rear skirt.
The hip joint axis can be lowered to expand the range of motion of the legs.

[Accessories]
  • 1 x energy gun
  • 1 x mono-eye replacement part
  • 1 x replacement part for arm punch
  • 1 x fingertip part (left)
  • 1 x replacement part for shoulder missile hatch deployment
  • 1 x beam saber
  • 1 x sticker

RM90.00
img
PO PriceRM330.00

The Robot Spirits <Side MS> RX-178 GUNDAM Mk-Ⅱ (A.E.U.G.) ver. A.N.I.M.E.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2024
Estimate arrival : NOV 2024

- P-O Price RM330.00
- Deposit RM60.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
An ace machine that was repainted white after it was taken from the Titans and operated by Ego. The \"White Gundam,\" which demonstrated its performance without regret and became a symbol of Ego, appears on ver. A.N.I.M.E. with a variety of options!
A general-purpose mobile suit redesigned by the Titans from the RX-78. The two captured by Kamille Bidan and his crew, and the first unit brought in by Emma Sheen, were repainted white inside the Argama. One unit was used in the film, and the others were used as spare parts. In addition to Kamille and Emma, Quattro Bajeena also piloted it, and it achieved many victories in AEUG\'s operations.
Package: 
  • Main body
  • 4 pairs of interchangeable hands
  • Shield
  • Wrist parts storage deck
  • Hyper Bazooka
  • Vulcan Pod System
  • Beam Rifle
  • Spare E pack x 2
  • Spare bazooka cartridge
  • Bazooka cartridge cover
  • Joint set
  • Effect set

DEPOSIT: RM60.00
DEPOSIT: RM60.00 Request Stock
img
PO PriceRM420.00

MG 1/100 Full Armor ZZ Gundam Ver. Ka

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM420.00
- Deposit RM50.00, Balance RM370.00
- We will inform to make balance RM370.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Hajime Katoki supervised Bandai's newest "Master Grade" Gunpla kit -- make way for the Full Armor ZZ Gundam, Ver. Ka, from "Mobile Suit Gundam ZZ"! The add-on armor can be rearranged to attach the Hyper Mega Cannon; you can also remove the add-on armor to recreate the Enhanced ZZ Gundam. The add-on armor parts have been carefully adjusted to fit the mech's main body, achieving proportions that don't give it a bulky impression. The Double Beam Rifle can be attached to the forearm, or held in the hands; the Hyper Mega Cannon can be attached to the backpack by replacing it with a missile pod. The forearm features a rolling mechanism which allows the add-on armor to move in tandem when raised horizontally to prevent interference. Order this truly impressive mech for your own collection today!

[Includes]:

Double Beam Rifle
Hyper Mega Cannon
Beam Saber (x2)
Shields (x2)
Fingertip parts (x1 set)
Waterslide decals
Stickers
Lead wire

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM660.00

THE ROBOT SPIRITS <SIDE MS> MSN-00100 HYAKU-SHIKI ver. A.N.I.M.E.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2025
Estimate arrival : SEP 2025

- P-O Price RM660.00
- Deposit RM150.00, Balance RM510.00
- We will inform to make balance RM510.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The golden mobile suit piloted by Quattro Bajeena, the ace of the A.E.U.G., comes to ver. A.N.I.M.E.! Four types of distinctive head sensors are included to reproduce various scenes.

A machine developed under the \"Zeta Project.\" It was originally planned as a transforming MS. Although structural defects were found, its performance in its mobile suit form was good, so it was rolled out as a non-transforming machine. It was used by Captain Quattro Bajeena during the Gryps Conflict.

  • Main body
  • 4 pairs of interchangeable hands
  • Hand storage deck
  • 3 interchangeable head sensor parts
  • Beam Rifle
  • Zaku Bazooka
  • Head antenna
  • Head antenna (spare)
  • Various joint sets
  • Various effects

DEPOSIT: RM150.00
DEPOSIT: RM150.00 Request Stock
img
SAVERM27.90

[204] HGUC 1/144 Barzam

- Than [Mobile Suit Z Gundam], kit of shock!

- Titans last mass-production machine `` Bazamu sortie !!

01-kit in the proportions of the latest format
Distinctive MS design, even the back of the vernier reproduction.

02 wide range of motion to allow a variety of poses
Possible before and after, the top and bottom of the running of the shoulder portion.
The use of the ball joint part, can be moving back and forth.

03-color reproduction involved to detail
Mono Eye clear parts.
Chest, attention to detail as well, such as the waist of the yellow line, even color ring of distinctive aircraft reproduced.

It comes with 04-rich armed
Characteristic beam rifle, Balkan pod systems and beam saber, etc. is included.

It can reproduce the 05 in the play scene
Of April released HGUC Zeta Gundam confrontation display of the possible!

- accessories
Beam rifle x 1
Beam saber x 2
Balkan pod system x 1

RM62.00
img
SAVERM103.80

RE/100 AMX-103 Hamma-Hamma

The mysterious silhouette at the Gundam Expo has now been revealed! The highly anticipated Hamma-Hamma is now part of the RE/100 series! From the original ZZ Gundam, Hamma-Hamma is sculpted with excellent details and proportions. The flexible arm has a large number of gimmicks including the utilization of soft materials and lead wiring to reproduce long-range attacks! Hamma-hamma's shield with mega-particle gun is accurately reproduced and has meticulous detailing, even in the underside. Set includes shield with mega-particle gun, two beam sabers, space eye, and arm display seat x4. Runner x19. Sticker sheet x1.

Accessories:
· Shield with mega particle gun x 1
· Beam · saber x 2
· Spacemain x 1
· Arm display pedestal x 4

RM165.80
img
SAVERM72.40

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type)

P-Bandai: HGUC 1/144 MSZ-006 Zeta Gundam (Wave Shooter Equipment Type) 

RM127.60
img
SAVERM1863.00

P-Bandai: HG 1/144 Zaku Cannon Test Type

P-Bandai: HG 1/144 Zaku Cannon Test Type


Release date : Dec, 2017
Estimate delivery : Jan,2017

RM137.00
img
SAVERM26.00

[212] HGUC 1/144 GALBALDY B

HGUC 1/144 GALBALDYβ


The Galbaldy Beta from Mobile Suit Zeta Gundam finally appears after 30 years into the HGUC line! Sparing no limitation in detail, vents and panels dot its body including the reproduction of frame components that are visible on the outside. A new bicep swivel allows for additional mobility while preserving the arm structure.

RM64.00
img
SAVERM20.00

P-Bandai: HGUC 1/144 RX-124 Gundam TR-6 (Woundwort) [Reissue]

P-Bandai: HGUC 1/144 RX-124 Gundam TR-6 (Woundwort)

First Release Date : June 2018
Reissue Date : Dec 2019
Estimate Delivery : Jan 2020

[ACCESSORIES]
  • Composite Shield Booster
  • Action Base x 2

RM130.00
img
SAVERM55.00

P-Bandai: MG 1/100 G Parts [Hrududu]

P-Bandai: MG 1/100 G Parts [Hrududu] 

Release Date: July, 2018
Estimate Date Delivery: August 2018

Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM135.00
img
SAVERM30.00

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts


Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM100.00
img
SAVERM17.90

[05] SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM

SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM


- Zeta Gundam, the protagonist of [Mobile Suit Z Gundam] appears in the series that can enjoy two silhouettes [SD Gundam Cross Silhouette] series!

- Reproduce distinctive coloring.
- Combined with [SD Gundam Cross Silhouette Frame] (sold separately), it is possible to upgrade high head and improve mobility.
- [Z Zaku] that appeared in [ZZ Gundam] in combination with [SD Gundam Cross Silhouette Zaku II] can be reproduced.

- accessories
Beam rifle x 1
* Shield (grenade launcher) x 1
* Beam * saber x 1

- Product content
* Molded product x 3
* Foil seal x 1
* Instruction manual x 1

RM42.00
img
SAVERM64.70

[214] [HGUC 1/144 Byarlant

HGUC 1/144 Byarlant


One of the last mobile suits from the Zeta Gundam series finally makes an appearance! Using new parts for the head and various armor sections, its color separation allows recreation of many fine detailed areas. 

Accessories:
Beam  saber x 2

Product content:
- Runner x 15
Foil sticker x 1
Instruction manual x 1

RM91.00

Showing 1 - 30 of 167 products