Price Clear







Showing Gundam Model Kits + MOBILE SUIT GUNDAM product(s)

Showing 31 - 60 of 357 products

img
SAVERM240.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM420.00
RM420.00 Add to cart
img
SAVERM240.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM420.00
RM420.00 Add to cart
img
SAVERM194.90

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM273.00
RM273.00 Add to cart
img
SAVERM156.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily ?Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM273.00
RM273.00 Add to cart
img
SAVERM62.40

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM87.50
img
SAVERM156.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM273.00
RM273.00 Add to cart
img
SAVERM17.08

SD Ex-Standard RX-78-2 Gundam

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

RM18.90
img
SAVERM31.90

[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1

RM40.00
img
SAVERM3.00

XYS HG 1/144 Efreet Custom [Metallic Gloss Injection] with Water Decal

XYS HG 1/144 Efreet Custom [Metallic Gloss Injection] with Water Decal

Brand : Third Party Brand XYS
Scale : 1/144
Grade : High Grade
Model : Efreet Custom
Water Decal : Included

Please note that this is Non-Bandai product

RM32.80
img
SAVERM62.40

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM87.50
img
SAVERM29.90

[197] HG REVIVE 1/144 Gyan

  • Accessories: dedicated beam saber, dedicated shield

RM42.00
img
SAVERM28.00

[Daban] 6641 MG 1/100 Jesta Canon (Clear Version)

[Daban] 1/100 Jesta (MG) Clear Version


Series: Gundam UC
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

Type : Clear Version

Please note that this is not Bandai product

RM100.00
RM100.00 Add to cart
img
SAVERM3.00

ZM HG 1/144 RX-81ST G-Line Standard Armor with Water Decal (Non-Bandai)

HG 1/144 RX-81ST G-Line Standard Armor 

Brand : Zhan Mo 
Scale : 1/144
Grade : High Grade
Model : HG 1/144 RX-81ST G-Line Standard Armor 
Stand : Not Include
Water Decal : Include

Please not that this is NOT Bandai product

RM33.80
img
SAVERM17.40

BANDAI ENTRY GRADE 1/144 Strike Gundam

Strike Gundam is now available in the second Next Generation First Gunpla!
Beam rifle and shield are attached to the equipment.
Bold and excellent parts division. Reproduce the color coding just by assembling. No need to paint or stick stickers.
Easy-to-understand runner placement with parts organized for each part. Touch gate specifications that can be easily removed by hand without using nippers.
A large range of movement is secured for the movable parts of the torso, legs, and arms. Supports bold action poses.
The black outline of the camera eye is expressed by the shadow that can be created as the clearance between the parts.

[Accessories]
  • Instruction manual x 1
  • Beam rifle x 1
  • Shield x 1

RM24.50
img
SAVERM124.50

MG 1/100 DOM Ver. 2020

From Mobile Suit Gundam, the popular MG 1/100 Dom has been upgraded with new molds and parts updates!
Improved exterior parts such as the waist and arms with a new mold. In particular, the shape of the arm has been modified so that the connection between the shoulder and forearm looks natural, and the joint structure of the elbow has also been redesigned.
A forward swing mechanism is mounted on the connection between the shoulder and the torso. The impressive pose of holding the giant buzz reduces the interference of each part and is decided smoothly.
A swing movable structure is newly adopted for the hip joint. In addition, the range of motion of the legs has been greatly expanded by adding movable axes to the thigh connection and updating the waist side armor.
The internal frame of the ankle has been changed to reproduce Dom\'s characteristic crouched pose.
A wealth of weapons such as Giant Buzz, Raketen Buzz, and Sturm Faust are included.

[Accessories]
  • Heat Saber x 1
  • Giant Buzz x 1
  • Raketen Buzz x 1
  • Sturm Faust x 2
  • 90mm Machine Gun x 1
  • Water slide decal x 1

RM175.00
RM175.00 Add to cart
img
SAVERM20.00

[Daban] MEGA SIZE 1/48 MS-06F Zaku II

[Daban] MEGA SIZE 1/48 MS-06F Zaku II

Series: Gundam
Grade: MEGA SIZE
Manufacturer: Daban
Scale:1/48

Please note that this is not Bandai Product

RM170.00
RM170.00 Add to cart
img
SAVERM19.90

Entry Grade EG 1/144 Strike Rouge Gundam

  • From Mobile Suit Gundam SEED, the Strike Rouge piloted by Cagalli is now available in the "easy-to-assemble, high-quality" ENTRY GRADE!
  • Includes various weapons. Also includes marking stickers such as Cagalli's personal mark.
  • Excellent color reproduction despite the small number of parts.
  • A range of motion that can accommodate bold action.
  • Can be equipped with the separately sold "Option Parts Set Gunpla 15 (Cavalier Aifrid)". You can recreate scenes from Mobile Suit Gundam SEED FREEDOM.
  • Can be equipped with the separately sold "Option Parts Set Gunpla 01 (Aile Striker)".

[Accessories]
  • 1 x Beam Rifle
  • 1 x Shield
  • 1 x Sticker

RM28.00
img
SAVERM81.70

HG 1/144 Bolinoak-Sammahn

  • From "Mobile Suit Z Gundam", "Borinoak Saman" is commercialized in HG with the latest gimmick!
  •  In addition to the movable gimmick of the claw part of the "dedicated shield", fine details such as the beam output part at the tip are also reproduced.
  •  By attaching effect parts to the grip stored on the back of the "dedicated shield", the "Beam Tomahawk" and "Beam Saber" can be reproduced.
  •  The shoulder armor is equipped with a deployment gimmick for reproducing the firing of the "Explosive Bullet Launcher".
  •  A head part that expresses the "illuminating state" of the radome is included. The characteristic shine of the radome is reproduced by replacement type by "reflection cut" and "sticker".
  •  In addition to the ball movement of the head, a movable axis is provided at the base of the neck, allowing it to swing back and forth widely.
  •  A pull-out mechanism is installed on the shoulder to expand the movable range of the arms.
  •  The backpack, which is the key to high mobility, can be moved individually by multiple ball joints.

[Accessories]
  •  Head part (illuminating state) x 1
  •  Effect parts x 1 set
  •  Hand parts x 1 set
  •  Sticker x 1

RM110.00
RM110.00 Add to cart
img
SAVERM50.00

Mecha Ark 1/100 Dominant Titan (Messer Comander) Plastic Model Kits

Mecha Ark 1/100 Dominant Titan Plastic Model Kits

Model Brand : Mecha Ark
Model Height : 25cm
Some parts are pre-painted

Please note that this is Non-Bandai product

RM168.00
RM168.00 Add to cart
img
SAVERM17.90

Bandai GUNPLA-KUN 3D Rubber Mascot Keychain

A series of six 3D mascot keychains featuring Gunpla-kun, the character that conveys the fun of Gunpla! 
The keychain comes with a rubber charm with the character's name printed on it.

RM36.00
img
SAVERM17.90

Bandai GMPLA-KUN 3D Rubber Mascot Keychain

A series of six 3D mascot keychains featuring Gunpla-kun, the character that conveys the fun of Gunpla! 
The keychain comes with a rubber charm with the character's name printed on it.

RM36.00
img
SAVERM65.00

Daban 8832 MG 1/100 Strike Gundam with Gunbarrel Striker Backpack Metal Build Alike Ver. Plastic Model Kit

Daban 8829 MG 1/100 Strike Gundam with Gunbarrel Striker Backpack Metal Build Alike Ver. Plastic Model Kit

Brand : Daban
Ver. : Metal Build alike
Grade : 1/100
Material : ABS
Code : 8832

Please note that this is Non-Bandai product

RM165.00
RM165.00 Add to cart
img
SAVERM19.90

Bandai 1/1 Zakupla-kun DX set (with runner version parts)

* Introducing Zakupla-kun from Gunpla-kun, which conveys the fun of Gunpla!
* You can choose to display it in either the runner version! Familiar equipment is also included.
* You can choose to display Zakupla-kun in either the normal version or the runner version.
* This time, it comes with a PS body and the familiar equipment Heat Hawk, Zaku Machine Gun, and Zaku Bazooka.
* The mono-eye can move left and right.
* Collect the separately sold Gunpla-kun series plastic models and display them in the style of the movie!

[Accessories]
* 1x runner part
* 1x heat hawk
* 1x Zaku machine gun
* 1x Zaku bazooka
* 1x display pedestal

RM40.00
img
SAVERM19.90

1/1 Charzaku-kun DX Set (with runner ver. recreation parts)

* Introducing Chars Zaku-kun from Gunpla-kun, which conveys the fun of Gunpla
* You can also display it in the runner version by selecting it! Familiar equipment is also included
* Display Char's Zaku-kun in either the normal version or the runner version by selecting it.
* Also includes familiar equipment such as the heat hawk, Zaku machine gun, and Zaku bazooka.
* Mono-eye can move left and right.
* Collect the separately sold Gunpla-kun series plastic models and display them in the style of the movie!

[Accessories]

* 1x runner part
* 1x heat hawk
* 1x Zaku machine gun
* 1x Zaku bazooka
* 1x display pedestal

RM40.00
img
SAVERM3.10

XYS HG 1/144 MS-08 TX/N Efreet Nacht with Water Decal

XYS HG 1/144 MS-08 TX/N Efreet Nacht with Water Decal

Brand : Third Party Brand XYS
Scale : 1/144
Grade : High Grade
Model : MS-08 TX/N Efreet Nacht

Please note that this is Non-Bandai product


RM32.80
img
SAVERM4.00

Third Party Brand HGUC 119 Nobell Gundam (Non-Bandai)

HGUC 119 Nobell Gundam

Brand : FeiDa (Third Party)
Model : Nobell Gundam
Grade : High Grade
Scale : 1/144

Please note that this is Non-Bandai product

RM28.90
img
PO PriceRM240.00

Robot Spirits < Side MS > MS-06S Char Aznable's Zaku II Ver. A.N.I.M.E. [Reissue]

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2025
Estimate arrival : APR 2025

- P-O Price RM240.00
- Deposit RM50.00, Balance RM190.00
- We will inform to make balance RM190.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

- 22 years of history and innovation. Red comet Genru to ROBOT soul!

- ANIME moveable
- The drawer movable neck joint, can be directed to the front of the head even in flight conditions, such as the animation scene.
- Overwhelming moving performance is achieved by a mechanism verification of the elbow joint and knee joint. Further, the power pipe By the soft material, can be more realistic poses.
- The elbow joint mechanism with the axis of rotation, it can animation scene similar joint reproduction.
- Applied to the movable front skirt, by fundoshi itself is movable, movable area of u200bu200bthe legs and abdomen is greatly expanded.

- ANIME options
Vernier effect, Zaku machine gun effect, Zaku bazooka-effects included. Further realism of reproduction in the play is enhanced by the blast effect. (Char Zaku the blast effect that comes with [ROBOT soul RX-78-2 Gundam ver. ANIME] also can be attached to the shield that came with the (optional)).

- The set includes: body, replacement wrist left and right each four, Zaku machine gun, Zaku machine gun effect, heat Hawk, heat Hawk (storage form), Zaku-bazooka, Zaku-bazooka effect, vernier effect × 2, blasting effect, wrist storage deck

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM260.00

ROBOT Spirits <SIDE MS> GAT-X105 Strike Gundam ver. ANIME

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM260
- Deposit RM50, Balance RM210
- We will inform to make balance RM210 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Mobile Suit Gundam SEED, which is celebrating its 20th anniversary, joins the ver. ANIME new series! Following the movable structure and expandability of effects cultivated in the series, "Strike Gundam" is revived in the Reiwa era!
New expressions are possible with unique structures such as elongation of the torso and bending of the legs.

The unique movable structure cultivated in the ANIME series allows for unprecedented action expression.
Aiming for a new standard with a form balance that balances the work and setting image.
First ever! Reproduce the head Vulcan with effect parts.
First ever! The back vernier is reproduced with effect parts. Accelerate active posing.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
PO PriceRM268.00

THE ROBOT SPIRITS <SIDE MS> MS-14S GELGOOG CHAR'S CUSTOM MODEL ver. A.N.I.M.E.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2025
Estimate arrival : FEB 2025

- P-O Price RM268.00
- Deposit RM50.00, Balance RM218.00
- We will inform to make balance RM218.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Anime form and overwhelming range of motion!
New comet of red dwarf ver. A.N.I.M.E. Appeared in the series!

A red aircraft that appeared as a love machine of \"red comet \'s sharp\" than when the battle stage moved to space.
Gimmick realizing modeling and overwhelming mobility aware of animation form.
Effect parts that enable reproduction in the play and interlocking between series.

A.N.I.M.E. - Movable
Both animation form and overwhelming range of motion are compatible.
Movie verification is repeated, animation movable realized by a new gimmick is movable.
The skirt can retract and move according to the movement of the leg, allowing natural posing.
With multiple structure abdominal joints, you can bend forward and warp.

A.N.I.M.E. - Options
Various optional parts such as rotation effect of Naginata and vernier, beam rifle shooting effect etc. are attached.
In addition, damaged shoulder cut damage parts are also included in the battle with Gundam.

A.N.I.M.E.-Linkage
Can be combined with the ROBOT SPIRITS?SIDE MS? YMS-15 Gyan ver. A.N.I.M.E. (sold separately) and other models released in August 2018 to recreate famous scenes from the play.


 Product Specifications
Height: about 130mm
Material: ABS and PVC

Contents
  • Main body
  • 4 pairs of interchangeable hands
  • Beam
  • Naginata grip 3 types
  • Beam
  • Naginata effect 3 kinds
  • Shield
  • Hand storage deck
  • Beam Rifle
  • Beam Rifle fire effects
  • Vernier effect x4
  • Shoulder Cutting Damage Part
  • Joint set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM168.00

Gundam Universe XXXG-00W0 Wing Gundam Zero

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : JUL 2025

- P-O Price RM168.00
- Deposit RM50.00, Balance RM118.00
- We will inform to make balance RM118.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

-The long-awaited [Wing Gundam Zero] from GUNDAM UNIVERSE is here!

- A new frame has been adopted to achieve the optimal range of motion and ease of play, allowing for recreations of scenes from the movie!

- From GUNDAM UNIVERSE, [Wing Gundam Zero] is now available!
- Comes with a twin buster rifle, allowing you to recreate scenes from the movie!
- The shoulder pull-out structure makes it possible to hold the Twin Buster Rifle with both hands!
- Beam sabers are included, expanding the range of action poses!
- A design arrangement unique to GUNDAM UNIVERSE.
- New opening wrist parts are included! A wide range of accessories are included for ease of play.
- You can recreate the showdown with the simultaneously released [GUNDAM UNIVERSE OZ-13MS GUNDAM EPYON] (sold separately)!

[Set contents]
* Main unit
Interchangeable wrist parts (3 types each for left and right)
Twin Buster Rifle
Wing shield
Beam sabre × 2
Joint parts set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock

Showing 31 - 60 of 357 products