Price Clear







Showing Gundam Model Kits + MOBILE SUIT GUNDAM product(s)

Showing 211 - 240 of 350 products

img
SAVERM11.20

[BB321] Bacho Blue Destiny

The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

RM22.70
img
SAVERM83.90

MG 1/100 RX-78-2 Gundam Ver.2.0

  • From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  •  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  •  Equipped with a movable core fighter! 
  •  Includes Stand to display the Core Fighter.
  •  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer

RM168.00
img
SAVERM143.30

MG 1/100 RX-78-2 Gundam Ver.2.0 (Titanium Finish)

  • From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  • Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  • Equipped with a movable core fighter! 
  • Includes Stand to display the Core Fighter.
  • Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer

RM297.60
img
SAVERM106.00

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM224.90
img
SAVERM90.90

MG 1/100 MSN-02 ZEONG

  • Pull-out hip and shoulder joints.
  • All joints are movable fingers 10.
  • Mono Movable nozzle head and ears.
  • Refer to the left and right arm stand.
  • Detachable head.

RM240.00
img
SAVERM19.40

[114] HGUC 1/144 RB-79 Ball Twin Set

  • HGUC release the ball from the set of 2! 
  • Ball-inspired style Fasutogandamu version. 
  • Appeared in Platoon 08 180mm cannon in addition to the low recoil, comes with twin Fifutinkyariba expression. 
  • Comes with display base. 
  • The camera reproduced with clear parts. 
  • Movable arm portion. 
  • Will be set two. 
  • Accessories: low recoil cannon base × 2,180 mm × 2, twin Fifutinkyariba

RM58.50
img
SAVERM39.90

Gunpla Starter Set : HGUC Gundam Vs. Zaku II

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 


Both feature their High Grade Universal Century kit designs and come complete with their original weapon configurations. 

This special 2 pack also includes a how to guide providing pictorial steps on how detail Gunpla and go farther beyond simple straight assembly. 

Runner x 8 
Instruction Manual x 1

RM80.00
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
img
SAVERM57.10

MG 1/100 RX-78-2 Gundam One Year War (w/clear parts)

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RM134.80
img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
img
SAVERM117.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily ?Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM312.00
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
img
SAVERM10.90

[019] HGUC 1/144 MSM-07S Char's Z'Gok

  • HG version of the MSM-07S. This is the specially modified version as piloted by Char. 
  • Molded in Bandai's patented multi-gate technology which allows multiple colors on one tree. 
  • Painting is not required. 
  • Posable via multi-segmented arms and legs. 
  • Claws are moveable. 
  • The thrusters on back can also be moved.

RM30.00
img
SAVERM10.90

[020] HGUC 1/144 RGM-79 GM

[020] HGUC 1/144 RGM-79 GM

RM30.00
img
SAVERM19.90

[021] HGUC 1/144 RX-78-2 Gundam

The HGUC  1/144 RX-78-2

- Core Fighter of shape importance is attached
- Weapons beam rifle x 1
- hyper bazooka x 1
- Shield x 1
- beam saber x 2 is attached

RM40.00
img
SAVERM30.90

[059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom

  • [059] HGUC 1/144 MS-09 Dom / MS-09R Rick Dom
  • The MS-09R Rick Dom is a mass production space combat mobile suit and a variant of the MS-09B Dom

RM70.00
img
SAVERM27.90

[065] HGUC 1/144 EMS10 Zudah

An experimental mobile suit with high velocity, the Zudah from the MS IGLOO series comes with Zaku machine gun, heat hawk, shield, and giant 135 mm rifle. Comes with 3 different helmet styles to replicate the variantes used in the series.

RM56.00
img
SAVERM23.90

[072] HGUC 1/144 RGM-79FP Gm Striker

- Commercialization of HGUC series in the MS that appeared in the bonds of Mobile Suit Gundam Battlefield] arcade game.
- The pursuit of realism add a mold rivets, welding in the armor of the whole body.
- Elbow adopts a double joint, reproducible posing in the play.
- Armed comes shield twin beam and Spear (provisional), the beam saber.
Beam Spear, of saber reproduced in clear.
- I reproduce a movable gimmick of twin beam spear, the expansion and contraction of the blade gimmick part of the shield.

RM48.00
img
SAVERM41.90

[075] HGUC 1/144 RX-78 GP02A Physalis (Type MLRS)

RX-78GP02A Gundam GP02A (Type-MLRS) is a prototype general-purpose tactical mobile suit and is a variant of the RX-78GP02A Gundam "Physalis". It is featured in the original design series Harmony of Gundam variations by Hajime Katoki.

Alternate equipments for the Gundam Physalis allow it to function as a heavy assault mobile suit. The nuclear warhead is removed and replaced by a six-tube Multiple Launch Rocket System, or MLRS, with three tubes mounted on each side of the backpack. The rockets in the MLRS are almost the size of a cruise missile, and thus can pack a much larger punch. In mid range combat, it can easily bombard a large area, sweeping down a majority of the enemies so that the normal troops can come in to clean up the remaining enemies easily.
For more conventional firepower, the GP02A can be loaded with a particle generator in place of the nuclear warhead and use the atomic bazooka as a heavy beam bazooka. The firepower of beam bazooka can rival that of a mega particle cannon on a large scale mobile armor such as MA-05 Bigro and the full charge shot is roughly equivalent to that of the massive MA-08 Big Zam.

However, none of the aforementioned equipment is used as the GP02A is stolen by Zeon ace Anavel Gato and then used to disable or destroy 2/3 of the Federation space fleet at Konpei Island. The GP02A is later destroyed in a heated battle with the GP01Fb Gundam Zephyrantes Full Burnern.

Art of this kits:

RM90.00
img
SAVERM31.90

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon


Grade : HG
Scale : 1/144

RM64.00
img
SAVERM49.90

[141] HGUC 1/144 RAS-96 Anksha

- Successor to the popular Asshimar, Mobile Suit Gundam Unicorn Episode 5`s Anksha joins the ever-expanding HG lineup!

- Appearing in the upcoming Mobile Suit Gundam Unicorn Episode 5, this massive Suit features a transformation mechanism and huge mounted weapons!
- Transforming gimmick utilizes a replacement system to shift into the disc-shaped MA form.
- Includes dedicated display stand to display in MA or MS form. Other suits can utilize MA form as a sub-flight system, adding another layer of play with this massive HG!
- Deployed in 0096 as a support unit, the EFF-fielded Anksha improves on the older Asshimar designs to provide support and mobility to the Jegan units. A conceptual machine, the Anksha can shift into a mountable high-speed sub-flight system for aerial maneuvers.

- Accessories: 

Beam Saber x2, 
Grip Manipulator (Left, Right), Fist (Left, Right), 
Display Stand,
Sub-Flight Grip Bar For MS (Left, Right)

RM106.00
img
SAVERM106.90

MG 1/100 RX-78-2 Gundam Ver.3.0

  • Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  • August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  • With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  • Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  • Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  • Rear leg armor enables better range of motion in the ankle joints. 
  • Includes paintable material for the internal structure for easy detailing.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka

RM162.00
img
SAVERM35.90

[166] MS-06R-2 Johnny Ridden's Customize Zaku II

- The Crimson Lightning's customized Zaku II makes its long-overdue entrance into the HGUC line! -   

- Zeon ace, major Johnny Ridden's Zaku II's signature shape is recreated as an HGUC kit- its massive shoulder spikes and sweeping calf -   

thrusters accurately molded, using the HGUC Zaku II as a base model.

- Accessories: Zaku Bazooka, Zaku Machine Gun, Heat Hawk

RM72.00
img
SAVERM32.30

[386] SDBB RX-105 Xi Gundam

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

  • minovsky craft unit deployment
    Open and close the shoulder and chest armor!
    Flight form can be reproduced by minovsky craft unit deployment gimmick!

  • major armed base addition is also included!
    Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

  • Messer, garsezon included!
    Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

  • eyes switched gimmicks
    By switching the eyes part sides, can be selected without eyes!

  • funnelmisail
    Funnelmisail injection effect parts! Can reproduce the firing scenes!

RM56.60
img
SAVERM53.90

MG 1/100 RX-78-2 Gundam Ver.1.0

  • Bandai's Master Grade (MG) Gundam RX-78-2 is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980! 
  • Like all the kits in the MG Gundam series, the level of detail is superb and virtually everything moves. 
  • The panels on the Gundam RX-78-2's legs flip open to reveal internal mechanisms. The head has a panel, too. 
  • Even the "Core Fighter" cockpit ship can be removed from the Gundam RX-78-2's mid-section. 
  • Fine mesh parts cover the inside of the chest air intakes for added realism. 
  • Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit.

RM95.00
img
SAVERM59.90

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM90.00
img
SAVERM54.90

MG 1/100 MS-14S Gelgoog (One Year War 0079 Ver.)

  • Gelgoog One Year War EDITION!!
  • Accesories: Beam Rifle x1, Beam Naginata x1, Shield x1
  • Item Size/Weight : 33.3 x 24.2 x 12.4 cm / 678g

RM125.00

Showing 211 - 240 of 350 products