Price Clear







Gundam Model Kits

Showing 1 - 30 of 73 products

img
SAVERM52.40

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM97.50
img
SAVERM52.40

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM97.50
img
SAVERM52.40

[006] RG 1/144 Skygrasper (Launcher/Sword Pack)


  • Fully compatible with RG Aile Strike Gundam. 
  • RG Strike Gundam can be changed into Launcher Strike with the Launcher Striker Pack. 
  • RG Strike Gundam can be changed into Sword Strike with the Sword Striker Pack. 
  • Launcher Grasper mode and Sword Grasper mode can be recreated. 
  • runner x9, realistic decal x1, instruction manual x1 

RM97.50
img
SAVERM52.40

[007] RG 1/144 RX-178 Gundam MK.II (Titans)

  • "RX-178 Gundam MK-â…¡", the legitimate successor of "RX-78 GUNDAM", appears as the eighth RG model. 
  • The newly adopted "advanced MS joints" enable to expand the range of motion. 
  • The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
  • Many gimmicks of the RG "real system" can be found such as the opening and closing of the cockpit hatch. 
  • The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
  • Gundam MK-â…¡ (AEUG) is also released at the same time. 
  • runner x11, realistic decal x1, instruction manual x1

RM97.50
img
SAVERM52.40

[008] RG 1/144 RX-178 Gundam MK.II (A.E.U.G)

  • "RX-178 Gundam MK-â…¡", the legitimate successor of ""RX-78 GUNDAM"", appears as the seventh RG model. 
  • The newly adopted "advanced MS joints" enable to expand the range of motion. 
  • The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
  • Many gimmicks of the RG "real system""can be found such as the opening and closing of the cockpit hatch and more. 
  • The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
  • Gundam MK-â…¡ (Titans) is also released at the same time. 
  • runner x11, realistic decal x1, instruction manual x1

RM97.50
img
SAVERM52.40

[009] RG 1/144 Justice Gundam

  • 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
  • Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
  • The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
  • Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
  • ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
  • Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
  • ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
  • Item Size : 31 x 19 x 8 cm

RM97.50
img
SAVERM52.40

[011] RG 1/144 Destiny Gundam

  • RG 11 bullet will be Destiny Gundam protagonist machine [Mobile Suit Gundam SEED DESTINY]
  • Finally here!
  • Also made by the Freedom Gundam ZAFT, Gundam and Justice
  • Destiny Gundam. Dropped into the [real] and its setting in this product,
  • Are using the Advanced mode in common with MS MS joint above. However,
  • At the same time to pursue your own settings to reproduce the Destiny Gundam, the exterior parts
  • How to install or Ikashi are the ones that are different from the previous two products RG series of body
  • Has become.
  • Armored division fine considering the actual machine, unique feature of RG. Such as the joints,
  • You can put a realistic decals, plans to reproduce the metal-like texture.
  • Also boasts a wide range of range of movement in the air `` poses unique appearance ?? SEED
  • Advanced mode can be reproduced by the joint MS.
  • Long-range beam cannon weapon variety, such as a beam shield included.
  • Also a characteristic wing, three-dimensional by actual investigation. Can be replicated gimmick wings and weapons deployment.
  • Accessories: beam rifle, beam saber ? 2, beam shield, shield,
  • Beam boomerang ? 2, beam sword, long-range beam cannon

RM97.50
img
SAVERM51.40

[012] RG 1/144 RX-78 GP01 Gundam Zephyranthes

  • Start-up plan in the RG series GP! - Simultaneous release of the two aircraft!
  • RG series of bullet 12,13 first prototype GP01 Gundam from [Mobile Suit Gundam 0083]
  • And (code name Zefiransasu), that the universe is a specification Furubanian.
  • The RG series is set anime called aircraft that are based on the RX78-2 Gundam renovation
  • I can have inheritance. As an expression, it was to improve the range of motion of the RG RX-78-2 Gundam on sale
  • Following the adoption of common development plan of the two aircraft in the play mode Advanced MS joint 5. In addition,
  • The core fighter is equipped with a horizontal connection mechanism. In addition, the repair of GP01 in the play
  • It Furubanian and core fighter aircraft design from a different background who became thus almost
  • The leg unit also design products while leaving the color of the ground war, specializing in aerospace
  • Dropped, they represent a set form that skillfully. In precise detail unique to RG
  • I have a real representation of mobile suits.
  • Fully reproduce the core block system. A gimmick, such as wings and nose rotation, backpack
  • By incorporating the core block system, which is one of the features of the first prototype Gundam,
  • Fully reproduce the deformation of the core Fighter II.
  • One year after the end of the war (Zefiransasu) ... first prototype Gundam RX-78GP-01
  • First prototype was born Gundam [Gundam Development Plan (Plan GP)] by.
  • Zefiransasu is a code name during development.
  • Accessories: beam rifle, beam saber ? 2, Jytte beam, shield,
  • 1/144 pilot figure

RM97.50
img
SAVERM51.40

[013] RG 1/144 RG-78 GP01FB Gundam Full Burnern

  • Start-up plan in the RG series GP! - Simultaneous release of the two aircraft!
  • RG series of bullet 12,13 first prototype GP01 Gundam from [Mobile Suit Gundam 0083]
  • And (code name Zefiransasu), that the universe is a specification Furubanian.
  • The RG series is set anime called aircraft that are based on the RX78-2 Gundam renovation
  • I can have inheritance. As an expression, it was to improve the range of motion of the RG RX-78-2 Gundam on sale
  • Following the adoption of common development plan of the two aircraft in the play mode Advanced MS joint 5. In addition,
  • The core fighter is equipped with a horizontal connection mechanism. In addition, the repair of GP01 in the play
  • It Furubanian and core fighter aircraft design from a different background who became thus almost
  • The leg unit also design products while leaving the color of the ground war, specializing in aerospace
  • Dropped, they represent a set form that skillfully. In precise detail unique to RG
  • I have a real representation of mobile suits.
  • Fully reproduce the core block system. A gimmick, such as wings and nose rotation, backpack
  • By incorporating the core block system, which is one of the features of the first prototype Gundam,
  • Fully reproduce the deformation of the core Fighter II.
  • Specification first prototype Gundam universe ... Furubanian first prototype Gundam RX-78GP-01Fb.
  • Standard specifications for equipment in the atmosphere, additional equipment for the purpose of improving mobility is applied.
  • And Universal Boost pod on the back, is one of the characteristic features.
  • Accessories: beam rifle, beam saber × 2, Jytte beam, shield,
  • 1/144 pilot figure

RM97.50
img
SAVERM61.88

[014] RG 1/144 Strike Freedom Gundam


  • The 14th in the RG Series - the Strike Freedom Gundam!
  • From Mobile Suit Gundam SEED, which brought us the Aile Strike Gundam, Freedom Gundam and Justice Gundam as Real Grade kits, we finally get the Strike Freedom Gundam! 
  • Heavily researched, the RG Strike Freedom is the most realistic depiction so far.
  • Advanced MS Joint allows for a huge range of motion and quicker assembly.
  • Reproduce the look of the metal joints using realistic decals. 
  • Gold Advanced MS Joint
  • Designed to replicate the Strike Freedom's characteristic gold inner frame, this is the first RG kit to have a gold-colored inner frame! 
  • Expandable Super DRAGOON Weapon Wing System! 
  • The largest element of the Strike Freedom, the Super DRAGOON system has been reproduced in exact detail according to research done for this Suit, and the interior frame has been molded in gold for an accurate build.
  • Beam Shield
  • Beam Shield reproduced with clear parts.
  • High-Energy Beam Rifles
  • High-Energy Beam Rifles can combine to form Long-Range Beam Rifle.
  • Xiphias 3 Rail Cannons
  • Waist-mounted Rail Cannons are equipped with deployment gimmick.
  • Accessories: Beam Rifle x2, Beam Saber x2, Beam Shield, Movable Hand (Left and Right),
  • Grip Manipulator(Left and Right), Action-Based Joint,

RM118.00
RM118.00 Add to cart
img
SAVERM52.40

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM97.50
img
SAVERM52.40

[019] RG 1/144 Gundam Astray Red Frame

  • Adopted the inner frame system "The Advanced MS Joint". 
  • Inner frames and outer armor move relative to each other, just like real human. 
  • The finely color-coded parts can express the shades without painting. 
  • Luster of metal can be expressed with realistic decals. 
  • Includes various marking stickers. 
  • The Japanese sword "Gerbera Straight", is silver color plated. The pattern on the blade is also reproduced. 
  • Includes a beam rifle, beam sabers and a shield. 
  • Runner x9, Realistic decal x1, Instruction manual x1

RM97.50
img
SAVERM52.40

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM97.50
img
SAVERM75.60

[022] RG 1/144 Sinanju

- Leaders of the [with sleeves], of crimson that Full Frontal to boarding MS` Sinanju `finally appeared at RG!

- RG POINT1: flexible thruster
Production enhancement of flexible thruster designed arranged by the actual historical research. Evolution to a more Gimikaru structure. Open and close while the medium mechanical exposed.

- RG POINT2: texture representation
Reproduce the whole body to arranged a gold patterned portions `engraved` in the plating and parts division. The underlying red molded color gloss injection specification. Beautiful glow of just Sinanju assemble enters the hand.

- RG POINT3: thrusters armor slide gimmick equipped
Thrusters of whole body equipped with a gimmick that the armor part to slide. Produce a mechanical sense of mechanical visible production.

- RG POINT4: high density detailing
Reflected in the whole body mechanical the Hajime Katoki dense detail design by draw down Mr..

- Reproduction of the armed
Equipment of Sinanju is included. Shield also adopted the engraving process. Back also detail reproduction.

- Accessories: beam rifle, beam saber, beam ax, shield, beam effect parts x— 3 types, weapons possession (left and right), palm (left)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 31 x 20 x 11 cm

RM152.00
RM152.00 Add to cart
img
SAVERM52.30

[023] RG 1/144 Build Strike Full Package

 Build Strike Gundam Say dream of is `` realistic appeared in RG!

- Build Strike Gundam full package to validate as a real machine of 17.7m, also reflect historical research of Iori Say, commercialization. Setting of in the play also means to pursue realistic, attractive build strike revives in new in the RG!

[RG POINT 01]
- RG appearance thorough investigation as a product in the real world based on their own actual historical research
- Reflects the detail that was associated from the actual fighters, such as the wing of build booster
- Based on the historical research of RG unique build strike and build booster separation and coalescence mechanism

[RG POINT 02]
- Remodeling the Strike Gundam to base
- Chobham Armour of surface detail which is also used in tanks to anime drama intermediate street, the shape introduced

[RG POINT 03]
- Clear parts, by Advance de MS joint, verification of RG system structure leading to the Star Build Strike Gundam

[RG POINT 04]
- Texture reproduction of the metal by the realistic decal

- Accessories: build booster, strengthening beam rifle, beam gun (possible recombination to beam rifle), beam saber × 2, Cho Bam shield, gun possession (right), grip hand (left and right)

RM97.50
img
SAVERM61.70

[024] RG 1/144 Gundam Gold Frame Amatsu Mina

RG 1/144 Gundam Astray Gold Frame Amatsu Mina


  • Descent to the guardian angel gold frame heaven Mina in the sky of the declaration] from the super popular Gaiden [Mobile Suit Gundam SEED ASTRAY] is RG!
  • RG POINT 1: reproduction of by the new gimmick [Maganoikutachi] -
  • Development and expansion and contraction gimmick mounted in [Maganoikutachi] back.
  • Telescopic mechanism is detail on the basis of the mechanism, such as a real machine of the actuator, reproduce the gimmick.
  • Reproduce the deployment to the storage and front to back.
  • Strengthening `grab` mechanism for as Grapple.
  • Arm movable, expansion and contraction is equipped with the RG own mechanism.
  • RG POINT 2: A new design by own actual historical research -
  • RG POINT 3: realistic armor part texture of heaven Mina -
  • RG POINT 4: first three-dimensional at 1/144 a spear-like weapon of offense and defense together [Okitsunokagami] -
  • Blade and beam shield is reproduced in clear plastic.
  • RG POINT 5: reproduce a variety of equipment of heaven Mina -
  • accessories
- Otsukinokagami × 1
- Torikerosu Kai × 1
- Totsukanotsurugi × 2
- Tsuruhanotachi × 1
- Maganoshirahoko × 2

RM118.00
RM118.00 Add to cart
img
SAVERM75.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam


- GUNPLA EVOLUTION PROJECT 2nd volume !!
- Unicorn Gundam is awake now, with a form pursuing reality and transformation gimmicks reproduced at 1/144!
- Unicorn Gundam is made into RG with a mechanism based on original setting consideration and real detail. [Transform] is realized for the first time on 1/144 scale by [Advanced MS Framework].

[EVOLUTION POINT `TRANSFORMATION (transformation)`]
- Create a product that will become Gundam's next-generation standard [GUNPLA EVOLUTION PROJECT]. EVOLUTION POINT in the second project [RG 1/144 Unicorn Gundam] is `TRANSFORMATION`. Realized transformation beyond the limit within the constraints of 1/144 scale.

[ADVANCED MS FRAMEWORK]
- A new framework developed to embody the Unicorn Gundam as RG. By "Advanced MS Framework" equipped with three gimmicks, [Advanced MS Joint], [Lock Mechanism], [Link Mechanism], we realize high stability after assembly and compatibility of movement of each part.

- 01: New frame pursuing a transformation mechanism [Advanced MS joint]
I thoroughly examined the transformation to the destroy mode, and created a new frame. It is the new design pursuing the transformation mechanism, [Advance MS joint] which is responsible for its center.

- 02: Precise locking mechanism to lock parts when transforming [lock mechanism]
Besides the armored part of the external forearm, locking mechanism for fixing parts after transformation is installed in various places. Realize high stability after transformation.

- 03: RG original proprietary [link mechanism] to reproduce a smooth transformation
The characteristic leg leg transformation of Unicorn Gundam is reproduced with a new [link mechanism]. This mechanism enables smooth transformation while alleviating the assembly process.

- Precise reproduction of weapon deployment. In addition to deployment of the psycho-frame of the shield, the cartridge detaching mechanism of beam ? magnum is reproduced.

- Accessories: Beam ? Magnum x 1, Beam ? Saber x 2, Hyper ? Bazooka x 1, Shield x 1

RM152.00
RM152.00 Add to cart
img
SAVERM89.60

[027] RG Unicorn Gundam 02 Banshee Norn

[027] RG Unicorn Gundam 02 Banshee Norn

Accessories: 
Beam Magnum × 1, 
Revolving Launcher × 1, 
Armed Armor DE × 1, 
Armed Armor XC × 1, 
Beam Saber x 2

RM150.00
RM150.00 Add to cart
img
SAVERM52.30

[028] RG 1/144 OZ-00MS Tallgeese EW

The highly anticipated Tall geese EW now joined the RG kit series ! Unique to the RG line, the Tall geese EW utilizes several gimmicks to emulate the heavy armor and thrusting power of the mobile suit as seen in the anime. 


The "Super Vernier's", which provide the suit's "murderous acceleration" never had its internal structure fully exposed in the "Gun dam Wing" anime, but is now given form making this an RG exclusive gimmick ! 

The suit's complex structure due to being a smaller mobile suit, utilizes insert molding technology to allow for both dense details and easy assembly. 

Locking mechanisms in various joints of the kit allow the Tall geese to use its massive Dober Gun, the suit's largest weapon, with one arm just like that in the anime! 

The Dober Gun also contains intense detailing such as a cartridge exchange, blowback gimmick and a grip that allows for even more freedom in articulation. Combine this kit with the RG 1/144 Wing Gun dam EW and create intense battle scenes! 

Accessories: 
- Dober Gun x1
- Circle Shield x1
- Beam Saber x2

RM97.50
img
SAVERM45.00

P-Bandai: RG 1/144 nu Gundam HWS Expansion Parts

Package Content:

---------------------
CHEST ARMOR UNIT
The chest armor unit is integrated with shoulder missile launcher.
It is also equipped with deployment gimmick on its front armor to reveal the missile launcher inside it.

HYPER MEGA RIFLE
HWS nu Gundam will not be completed without its Hyper Mega Rifle.
It is molded in multiple parts for it to be able to adapt some expansion and contraction gimmick.

LEG THRUSTER UNIT
The leg armors are extended with huge thruster units, to help the balance of its weight distribution, and to give the HWS nu Gundam a boost in space combat.

HIGH MEGA SHIELD
Given its huge appearance, the high-mega shield contains light weight parts to support the balance of its unit.
The barrel boosters can also be extended to a more dynamic presentation.

RM135.00
RM135.00 Add to cart
img
SAVERM109.40

[034] RG 1/144 Zeong

[READY STOCK] 


To commemorate the 40th anniversary of Gunpla, [Zeong] from [Mobile Suit Gundam] has been converted to RG with the latest technology and design!


-In order to reproduce the mechanism on the setting and the pose in the play, the original gimmick based on the actual machine verification is condensed to 1/144.
-Built-in [Advanced MS Joint]. Achieves both smooth and powerful expression and detailed details.

The mono eye can be moved to the left and right according to the movement of the neck. It can also be moved up and down manually.
-Built-in frame with a wide range of movement at the waist. Allows for more dynamic poses.

Four vernier on the chest and back are deployed in conjunction with the front-back movement of the chest.
-Each large and small vernier can be moved greatly individually by expanding the skirt part.
-The hand parts are insert-molded to reproduce precise details and movable joints.
-Reproduce the arm wired mega particle cannon by removing the forearm and attaching the lead wire.

[accessories]
* Display base x 1
* Lead wire (red) x 1
* Lead wire (black) x 2
* Realistic decal x 1

RM220.00
RM220.00 Add to cart
img
PO PriceRM125.00

[035] RG 1/144 Wing Gundam (TV Ver.)

The long-awaited RG version of the TV version of Wing Gundam with completely new modeling!
?? Various gimmicks to reproduce the setting mechanism and poses in the play, and the original gimmick based on the actual machine verification are condensed to 1/144 scale.
?? Introduced an original movable gimmick with the image of a bird in the wing part based on the actual machine verification unique to RG.
?? Advanced MS joint is used for the base of the wing.
?? Built-in movable gimmicks on shoulders and body block to reproduce the dynamic posture of Buster rifle and beam saber.
?? By rearranging the parts, it can be transformed into a bird form.
?? By using action-based compatible parts, it is possible to display not only in MS state but also in bird form.

[Accessories]
?? Buster rifle x 1
?? Shield x 1
?? Beam saber x 1
?? Hand parts (left and right) x 3 types each
?? Weapon holder (right) x 1 type
?? Action base compatible parts x 1
?? Realistic decal x 1

DEPOSIT: RM25.00
DEPOSIT: RM25.00 Add to cart
img
SAVERM112.00

P-Bandai: RG 1/144 Gundam Astray Gold Frame Amatsu [REISSUE]

Gundam Astray Gold Frame Amatsu is reproduced in Real Grade

From [MOBILE SUIT GUNDAM SEED ASTRAY],Gundam Astray Gold Frame Amatsu is released in RG series.

The form of the suit body is passed down from [Gold Frame] to [Gold Frame Amatsu Mina], and is thoroughly reproduced in a Real Grade arrangement!

Amatsu (incomplete) can also be reproduced!!

Reproducing the characteristic form and weapons of Gold Frame Amatsu!

* Gold Frame Amatsu is three dimensionally modeled based on research of the unique RG style. The characteristic forms are reproduced differing from Amatsu Mina.
* Includes weapons such as Torikeros Kai, Maga no Ikutachi, and Maga no Shirahoko.

The giant back weapon Maga no Ikutachi is loaded with an opening/closing mechanism. Maga no Shirahoko is reproduced with a firing gimmick.

* The first "incomplete" kit is released! Part of the suit form and Torikeros are reproduced with new molding that conforms to the RG standard !
* Reproduced in an -  ï¿½ï¿½incomplete -  ï¿½ï¿½ state with the side of the head, left shoulder, and left thigh differing from the normal Amatsu.
* 'Torikeros' is reproduced prior to repair, using new molding with rich detail.
* The tip can be equipped with Beam Saber -  ï¿½ï¿½s Beam Blade

A weapon salvaged along with Blitz Gundam's right arm. Equipped in an "incomplete" state.

Suits following Amatsu have been improved as 'Torikeros Kai'.

* "Incomplete" state can be reproduced by selecting parts.
* Includes abundant wrist parts 
* Includes new personal marking stickers and realistic decals with the same design as Amatsu Mina

Weapons : Torikeros Kai / Torikeros / Maga no Ikutachi / Maga no Shirahoko

RM208.00
img
SAVERM79.90

P-Bandai: RG 1/144 Build Strike Gundam Full Package [RG System Image Color]

P-Bandai: RG 1/144 Build Strike Gundam Full Package [RG System Image Color] 


Release date : Nov 2017
Estimate arrive date : Dec 2017

RM170.10
img
SAVERM61.70

[026] RG 1/144 Johnny Ridden MS-06R-2 Zaku II High Mobility Type

- 'Crimson Lightning' This high mobility type Zaku exclusively for Johnny Leiden is the first RG in the MSV series.

- Featuring equipments such as leg thrusters and backpacks [06R] are reproduced with new shaping.
- Designed by armor division that imagines actual maintenance ability by actual machine verification.
- The distinctive color ring reproduces the 'crimson aircraft' in real by separately using shades for each armor.
- In addition, a realistic decal including marking of Johnny Leiden exclusive machine is attached.
- The characteristic [4 holes] of the leg vernier drawn by Mr. Kanio Ogawara's MSV illustration was reproduced for the first time in history.
- It is possible to assemble even one normal hole vernier with selection formula.
- Even with high mobility type Zaku, the shape of the backpack unique to [06R - 2], which is different from [06R - 1A] type, is three - dimensionalized as set. It precisely reproduces small differences such as hooks arranged on the left side.
- [Giant Buzz] is reproduced with new parts. Besides that, Zaku machine guns and other basic arms of Zaku are included.
- In accordance with the setting of the aircraft, reproduced with new modeling, wrist size which is one size larger than conventional Z type F type.
- Detail of the vernier mechanism of the leg is precisely reproduced.
- Characteristic cover is detachable.
- Leg power pipe is flexibly movable with spring specification.

- Accessories: Giant · Buzz x 1, Zaku · Machine Gun x 1, Zaku Bazooka x 1, Heat · Hawk x 1

RM118.00
img
SAVERM89.60

RG 1/144 RX-0 Unicorn Gundam [Bande Dessienee Ver.]

- [Mobile Suit Gundam UC Bandesine] version Unicorn Gundam appears in the RG series!

- Following the full-size unicorn gundam statue gathering attention, [Mobile Suit Gundam UC Bandesine Episode: 0] starts full-scale serial from Monthly Gundam Ace December 2017 issue! In accordance with that topic, [RG Unicorn Gundam (Van de Ciné Ver.)] Is kitized with limited production!

- Armed Armor DE for Unit 1 is included, and additional decals are included.
- Special packaging spec with red background impressive!
- [ADVANCED MS FRAME WORK (an advanced MS framework)] realizes [Unnatural conversation] of Unicorn Gundam with 1/144 scale.

- Accessories: Beam - Magnum x 1, Beam - Saber x 2, Hyper -Bazooka x 1, Shield x 1, Armed Armor DE x 1

RM150.00
img
SAVERM89.60

[029] RG 1/144 MSN-04 Sazabi

RG 1/144 MSN-04 Sazabi

  • Experience the RG Sazabi with the largest gimmick of 1/144 scale history.
  • Red comet [Chia . Aznable] dedicated machine appearing in [Mobile Suit Gundam Char's Counter Attack] is made into RG.
  • Various movable gimmicks that can reproduce the posing in the play as well as the mechanism on the airframe setting, and condensed on the 1/144 scale up to the original gimmick by a real machine verification unique to RG!
  • Faithfully reproduce the aircraft, such as arms of arms, funnels etc., based on the sense of setting in the play.
  • Pursue more realism by actual machine verification. A deployment mechanism is installed in the propulsion section of verniers and backpacks.
  • In addition to abundant hand parts, arming that symbolizes Sotheby is attached. Due to various hand parts and high range of motion, both hand holding poses etc. can be reproduced.

[Accessories]
  • Beam shot - Rifle x 1
  • Beam - Tomahawk x 1
  • Beam - saber x 2
  • Shield x 1
  • Funnel x 6
  • Missile x 1

[Product content]
  • Molded article x 17
  • Realistic decal x 1
  • Instruction manual x 1

RM180.00
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
img
SAVERM40.00

[EXPO] RG 1/144 Gundam OO Raiser Special Clear Color Expo Edition

The genuine EXPO RG 1/144 Gundam 00 Raiser Clear Colour (stand not included).



RM180.00
img
SAVERM30.00

P-Bandai : RG 1/144 Banshee Norn Final battle Ver.

RG Banshee Norm Final battle Ver.


Release Date : March 2019
Estimate Delivery : April 2019

RM230.00

Showing 1 - 30 of 73 products