Searching for: Modelling Tools products | Bandai gundam models kits premium shop online | Bandai Toy Shop @ Gundam.my. Our online shop offers wide range of gundam model kits, LBX model, One Piece Grand Ship, etc plastic kits

Quick View

SAVERM9.90

Tamiya Color Acrylic Paint XF-01 Flat Black (23ML)

Tamiya Acrylic Paint XF series is the designated colors are flat finish.

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:

Color Code: XF-01

Type: Flat Black

Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00

RM20.00 Request Stock

Quick View

SAVERM152.00

GH-SPN-120 God Hand Ultimate Nipper Cutter 5.0 (Single-Edge)

Ultimate!!!Ultimate!!!!Ultimate!!!& Ultimate!!!!!!

As means, as the last point of reaching ultra-thin blade of a dedicated plastic nippers Plastic
This is the Ultimate Nipper. The highest rank of grade five sharpness.

- Sharpness is really good, characterized by breaks in the light force!
The reason for this is because the blade does not have only one.
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
Was not the case and say good or better sharpness both in the blade is in the same blade angle.
Nipper Ultimate 5.0 is cut with a knife and chopping board image.

Notes:

Ultimate 5.0 features and special nippers Plastic
With stopper to prevent the folding blade ,Added new feature
That put the stopper, and the blade edge is now not hit more than necessary.
A result, the break is eliminated concerned than ever before, you can use normally.
So good taste will be lost and disconnected when folding the parts to lose!
Can cut the parts for light and fatigue in the hand is hard work for a long time!
When the gate since it is less burr cut, reducing the processing time the gate!

Specifications

- single edged knife
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
The image of the cutting board and cut with a knife.
- Proven durability of the sharpness! !
There also consider the durability of our customers to focus on next sharpness degradation of sharpness.
Even after a test cut of the plastic stick of ?3mm of 10,000 made in our
Sharpness did not decline than other products!
The secret is because state-of-the-art technology to tool sharpening of our own.
- Will a hole in the blade and the cutting of iron wire. Please do not cut into the absolute.

- Product specification:

Length: 122mm
Weight: 60g
Blade length: 9mm about
The length of the grip: 83mm

------Coil spring spring

Light blue color of the grip-----
(To prevent out-of-function opens and spring too) with a stopper to prevent too open.
If you do not need the stopper, please remove the pin with pliers, etc.
-With the clash of blade protection
Part of the blade with a simple cap-

This product is the packaging blister pack

Simple explanation-papers
Made in Japan **MADE IN JAPAN

##One point advice on maintenance

Please give on a regular basis to oil the moving parts, such as sewing machine oil or KURE5-56.

Lubricating oil will be, it might be difficult to play.

After use, please I wiped clean from the blade. Can cause rust.

RM298.00

RM298.00 Request Stock

Quick View

SAVERM36.60

Gunpla Work Shop 002 - Essential Tips For Gunpla Beginners

NOTE: Please select "Self Collect at Gundam.my Ampang Office" as shipping option, so you won't get charge on shipping. You will only get your item during the workshop. Thank You for your cooperation.

Gunpla Work Shop 002 - Essential Tips For Gunpla Beginners

Come and join us at SDCC I-City Shah Alam this coming 3rd September to learn more about the basics of building a gunpla. We will provide you a FREE HG G-Self Gundam, Plato Gundam Cutter and RM10 Online Vouchure (worth up to RM61.00) !! The class would be conducted by a Pro Gunpla Enthuist Becky Law in English !!

Organizer: GUNDAM.MY
Date: 3rd September 2016 (Saturday)
Time: 2:00PM - 5:00PM
Venue: SDCC (Selangor Digital Creative Centre)
Address: E-28-1, Jalan Multimedia 7/AG, City Park, I-City, Shah Alam, Selangor.
Language: English and Bahasa

This WorkShop / Class will cover

Introduction of gunpla
Introduction of tools
How to remove nubs mark
How to remove seam lines
How to panel line
How to apply sticker / decal

Ticket Include

1 x HG Gundam Astaroth(To be use during the Work Shop)
1 x Plato Gundam Cutter (Can be exchange to Marker Pen if already has)
RM10 Online Vouchure with can buy Gundam at Youbeli on that day

About the Conductor : Becky Law

Becky is a scale model enthusiast, started plamo as hobby back in 2005/2006. Been invited to several gunpla competition as Judge and gunpla workshop. E.g C2AGE 2014 (gunpla workshop), Borneo Plamo Cup Challenge 2014 (Judge and workshop), Newtype Taiketsu 2015, Indonesia (Judge and workshop), etc.

She accepting commission work since December 2010, start with Out-of-Box build gunpla, and expanding the skills and field from time to time. Now, she even custom repaint transformers figure and building cars.

Awards won
2010 Bandai Action Kit World Cup - Champion in Group Build Category.
2012 Gundam mid-year Challenge - Best Creative and Modification.
2014 Gundam Model Kit Contest - 2nd runner up
2015 Mcon III - diorama category - commended

RM113.40

RM113.40 Request Stock

Quick View

SAVERM11.00

Tamiya Masking Tape Refill (18mm Width)

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.

Width 18mm / Length 18m

RM18.90

RM18.90 Request Stock

Quick View

SAVERM19.90

MODO D-05H Paint Remover 1000ML (Big)

MODO D-01S Paint Remover 1000ML (Big)
Contains 1000ML of thinner

RM70.00

RM70.00 Request Stock

Quick View

SAVERM8.00

MGM - Mr.Flatness (Small)

- MGM - Mr.Flatness (Small)
- Acrylic board sanding tools, which help to sand flat surface. No glue require, just hold the sandpaper with fingers.
- Recommend to cut the sandpaper in 2.5cm X 6cm for easy gripping and handling.

RM22.00

RM22.00 Request Stock

Quick View

SAVERM15.90

Tamiya Color Acrylic Paint XF-02 Flat White (23ML)

Tamiya Acrylic Paint XF series is the designated colors are flat finish.

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:

Color Code: XF-02

Type: Flat White

Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00

RM20.00 Request Stock

Quick View

SAVERM135.40

[Gundam Head] Magnifier 1/20 RX78 GP04G Gundam Head Bust

[Gundam Head] 1/20 RX78 GP04G Gundam Head

RM264.60

RM264.60 Request Stock

Quick View

SAVERM19.90

Tamiya Surface Primer Grey 100ml 87026

Tamiya Surface Primer Grey 100ml 87026

RM28.00

RM28.00 Request Stock

Quick View

SAVERM10.60

Tamiya Color Acrylic Paint Mini X-27 Clear Red (10ML)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-27
Color: Clear Red
Quantity: 10ml

RM9.30

RM9.30 Request Stock

Quick View

SAVERM10.60

Tamiya Color Acrylic Paint Mini X-07 (Red) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-7
Color: Red
Volume: 10ml

RM9.30

RM9.30 Request Stock

Quick View

SAVERM11.30

[Star Wars] Vehicle Model Series 005 - Y-Wing Starfighter

[Star Wars] Vehicle Model 005 Y-Wing Starfighter

Length: 112.6mm

Reproduced down to the tiniest detail.

Accurate detail even down to the underside.

Includes a display stand.

RM24.60

RM24.60 Request Stock

Quick View

SAVERM20.50

[Gaianotes] The Finish Master Extra Fine

This nifty gadget, complete with 10 tips and handle, will help you smooth out and remove excess glue, paint or paint remover to just about any hobby project you've got going.

RM9.50

RM9.50 Request Stock

Quick View

SAVERM17.40

[Gaianotes] Gaia Color No.103 Fluorescent Red (15ml)

[Gaianotes] No.103 Fluorescent Red (15ml)

Fluorescent Colors stand out dramatically when compared to other colors.

The Gaia Fluorescent Color is perfect or accenting parts of mecha, robots, cars and etc. Powerful and strongly colored, you can take your model to the next level.

Gaianotes Lacquer based paints are formulated in Japan specifically with the hobbyist in mind.

This line of paint features highly pigmented rich, vibrant colors which will bring excellent details to your next project.

Recommend Thinner : Mr Hobby Mr Color Thinner / MODO D-01H/D

Specs:
Type : Lacquer Base

Color Code: 103
Color: Fluorescent Red
Quantity: 15ml

[Three Tips of the Paint]

1. High Concealing Power - Densely pigmented for maximum coverage

2. Smooth application - No rough finishes

3. Quick dry time - Paint proceeds to dry fast

RM12.50

RM12.50 Request Stock

Quick View

SAVERM10.00

Tamiya Color Acrylic Paint XF-28 Dark Copper (23ML)

Tamiya Acrylic Paint XF series is the designated colors are flat finish.

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:

Color Code: XF-28

Type: Dark Coffer

Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00

RM20.00 Request Stock

Quick View

SAVERM31.90

[Limitless] LS-100 Mini Electrodrill Drill, Polish, Grinding Kit

First, super fan electric drill suitable for mould processing repair burnish, is suitable for both aluminum plate, thin copper, board, plastic board, chipboard, printed circuit board, epoxy board, and can be used for drilling in polishing, cutting need components, polishing, etc., it is the most ideal production operations use tools. Ultra low voltage power source is you use the most security.

Second, super mini drill is imported motor as drive component, and equipped with high-quality wear-resisting out and grinding head. With reasonable structure long service life, high prices, etc.

Highlights:

ABS plastic body and light weight for a long time work.

Quick change chuck device without any tools.

Replace different bits and chuck can drill hole of different diameter.

The supporting the use of the grinding wheel and grinding wheel for grinding and polishing cutting

Equipped with special blowing tool box small volume light weight easy to carry.

What's in the box:

1 X High-speed steel drill bit 5 (with a diameter not to 0.5; 1.0; 1.5; 2.5; 3.0)

1 X Chuck 5 (not the inside diameter of 0.5; 1.0; 1.5; 2.5; 3.0)

1 X Polished ceramic grinding wheel 4

1 X Off a grinding wheel

1 X Power adapter (output 12V 1A DC)

RM38.00

RM38.00 Request Stock

Quick View

SAVERM17.40

[Gaianotes] Gaia Color No.104 Fluorescent Green (15ml)

[Gaianotes] No.104 Flourescent Green (15ml)

Gaia Paints or Gaianotes are lacquer based paints that are popularized by modelers in Japan. Each normal sized paint comes in 15ml bottle or 50 ml bottle for EX series. Try these colors and see the difference!

Gaianotes Lacquer based paints are formulated in Japan specifically with the hobbyist in mind.

This line of paint features highly pigmented rich, vibrant colors which will bring excellent details to your next project.

Recommend Thinner : Mr Hobby Mr Color Thinner / MODO D-01H/D

Specs:
Type : Lacquer Base

Color Code: 104
Color: Flourescent Green
Quantity: 15ml

[Three Tips of the Paint]

1. High Concealing Power - Densely pigmented for maximum coverage

2. Smooth application - No rough finishes

3. Quick dry time - Paint proceeds to dry fast

RM12.50

RM12.50 Request Stock

Quick View

SAVERM17.40

[Gaianotes] Gaia Color No.105 Fluorescent Yellow (15ml)

[Gaianotes] No.105 Fluorescent Yellow (15ml)

Gaia Paints or Gaianotes are lacquer based paints that are popularized by modelers in Japan. Each normal sized paint comes in 15ml bottle or 50 ml bottle for EX series. Try these colors and see the difference!

Gaianotes Lacquer based paints are formulated in Japan specifically with the hobbyist in mind.

This line of paint features highly pigmented rich, vibrant colors which will bring excellent details to your next project.

Recommend Thinner : Mr Hobby Mr Color Thinner / MODO D-01H/D

Specs:
Type : Lacquer Base

Color Code: 105
Color: Fluorescent Yellow
Quantity: 15ml

[Three Tips of the Paint]

1. High Concealing Power - Densely pigmented for maximum coverage

2. Smooth application - No rough finishes

3. Quick dry time - Paint proceeds to dry fast

RM12.50

RM12.50 Request Stock

Quick View

SAVERM13.30

Tamiya Color Enamel Paint XF-01 Flat Black (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.

Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20

Specs:
Type : Enamel (Water Base)

Color Code: XF-1
Color: Flat Black
Quantity: 10ml

RM10.60

RM10.60 Request Stock

Quick View

SAVERM4.90

Tamiya X-1 Black Paint Marker

These pen-type paint markers can be used not only for painting plastic models, but also wood, metal, and glass, making them a versatile tool for any hobbyist.

RM13.00

RM13.00 Request Stock

Quick View

SAVERM10.98

MODO MX-10 Champagne Gold

contains 20ml
metal color
MODO CHAMPAGNE GOLD MX-10 20ML
mixed together with lacquer thinner for model kit painting.

RM19.00

RM19.00 Request Stock

Quick View

SAVERM15.90

Tamiya Color Acrylic Paint XF-16 Flat Aluminium (23ML)

Tamiya Acrylic Paint XF series is the designated colors are flat finish.

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: XF-16
Color: Flat Aluminum
Volume: 23ml

RM20.00

RM20.00 Request Stock

Quick View

SAVERM10.00

Tamiya Color Acrylic Paint XF-03 Flat Yellow (23ML)

Tamiya Acrylic Paint XF series is the designated colors are flat finish.

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:

Color Code: XF-03

Type: Flat Yellow

Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00

RM20.00 Request Stock

Quick View

SAVERM4.00

Tamiya Flat paint brush No 0 [87015]

Tamiya Flat paint brush No 05

High quality, easy to use performance.
Made of fine horse hair.
Off-white coloured bristles.
This brushis good for painting larger areas.
Natural coloured wood handle.

RM10.00

RM10.00 Request Stock

Quick View

SAVERM3.90

Tamiya Flat paint brush No 3 [87014]

Tamiya Flat paint brush No 3

High quality, easy to use performance.
Made of fine horse hair.
Off-white coloured bristles.
This brushis good for painting larger areas.
Natural coloured wood handle.

RM11.10

RM11.10 Request Stock

Quick View