Price Clear







Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

Showing 1 - 30 of 137 products

img
SAVERM319.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM580.00
RM580.00 Add to cart
img
SAVERM77.90

MG 1/100 Shenlong Gundam EW Ver.

  • The 3rd volume of the EW version is Shenlong Gundam! 
  • The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  • Marking work designed by Hajime Katoki. 
  • Accessories: Dragon-Hang, Beam Trident, Shield

RM150.00
RM150.00 Add to cart
img
SAVERM70.00

P-Bandai: MG 1/100 Altron Gundam EW Ver. (Nataku)

Note : Box is slightly dented but the runners are still in good condition.

From "MOBILE SUIT GUNDAM WING?Endless Waltz", the MG 1/100 Altron Gundam has finally been made available into a kit!
???
???Mobile Suit XXXG-01S2
???Wufei named this machine "Nataku"
???
From “MOBILE SUIT GUNDAM WING Endless Waltz", the MS Altron Gundam, enhanced version of the Shenron Gundam,
releases in the Master Grade Series.
It is named “two-head dragon(er-tou-long)?ALTRON” because of the characteristic weapon “Dragon Hang” equipped on both arms,
and now reproduced with a new design which is based on Master Grade standards.
????
* The 2 characteristic weapons is repoduced with new design!
??Includes the Dragon Hang and Twin Beam Trident with a new design based on Master Grade standards.
??
?(Dragon Hang)
??The stretch structure which shows the storage and attack position of the arm is recreated.
??The claw tip is movable on two-axis, and can be stretched, opened and closed.
??An arm block for extension is included, and it is possible to obtain a powerful pose display according to the scene.
??Includes 2 auxiliary stands which allows a stable display of the Dragon Hang for the attack pose.
?
?(Twin Beam Trident)
??The handle comes with various detailed new parts.
??Output ports are at both ends, which allows to mount the clear molded beam blades onto both sides.
??After removed the Beam Blades, the Beam Trident can be attached and carried on the backpack.
??
* Comes with BRAND NEW Character Figures??
????Includes a newly designed same-scale figure of Chang Wufei wearing the uniform of Marimeia troops (standing / sitting)
?
* Comes with a new design of water slide decals!
?
Weapons: Dragon Hang x 2 / Twin Beam Trident

RM380.00
RM380.00 Add to cart
img
SAVERM10.90

SD Ex-Standard Gundam Deathscythe Hell Ew

SD Ex-Standard Gundam Deathscythe Hell Ew

RM25.00
img
SAVERM19.90

[211] HGAC 1/144 Leo

The fourth installment of the "Gunpla Evolution Project" is the HGAC 1/144 Leo from "Gun dam Wing"! 

The Leo is a mass-produced MS named after the "Leo" constellation. Emphasis has been placed on this kit's ease of assembly, making it easier for fans to collect and build multiple kits! 

The new joint structuring on this kit allows for a wide range of articulation and shortens the time required for assembly. The joints can also be fitted later, making the process easier for those who enjoy customizing and painting their kits. 

The arrangement of the runners have also been reorganized by grouping the parts together to aide in an easy visualization of the kit's construction such as "leg parts" or "arm parts" in proximity of each other. 

In addition to ease of assembly, the HG 1/144 Leo also recreates designs and precise details that have been added to this new format such as the usage of clear parts instead of stickers on the main camera on the head. 

A drum gun, beam sabers, and shield and included and can be stored I the back of the shield. 

Combine this with other HGAC kits such as the "HGAC 1/144 Wing Gundam".

- Accessories
  • Drum Gun x 1
  • Beam Sabel x 2
  • Shield x 1

- Product content
  • Molded parts x 5
  • Instruction manual x 1

RM40.00
img
SAVERM10.90

SD Ex-Standard Wing Gundam Zero

Wing Gundam Zero is now available in a completely new model from SD-EX!
[accessories]
  • Twin Buster Rifle x 1
  • Beam saber x 1
  • Shield x 1
  • Foil seal x 1

RM25.00
img
SAVERM30.00

P-Bandai : MG 1/100 Tallgeese Fluegel EW

Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers continues its amazing releases with the Master Grade Tallgeese Flugel! This kit offers numerous amount of newly molded parts, from its head to its wing binders. The kit also shares the same molds with the MG 1/100 Tallgeese EW for its main body and added with various equipment new to the Tallgeese Flugel, that includes both heat lance and heat halberd.

RM420.00
RM420.00 Add to cart
img
SAVERM5.10

JMS HG 1/144 The Nascent Desert Sandrock Fighter with Water Decal

JMS HG 1/144 The Nascent Desert Sandrock Gundam


Brand : JMS
Scale : 1/144
Grade : High Grade
Model : Sandrock

Please note that this is NON-Bandai product

RM22.90
img
PO PriceRM120.00

Gundam Universe XXXG-01D2 Gundam Deathscythe Hell (EW)

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  APR 2024
Estimate arrival : MAY 2024

- P-O Price RM320
- Deposit RM100, Balance RM220
- We will inform to make balance RM 220 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The majestic Gundam Deathscythe Hell from "Mobile Suit Gundam Wing: Endless Waltz" is joining the "Gundam Universe" action-figure series from Bandai! Its impressive Beam Scissors weapon is included, as is its distinctive cloak. It's fully posable for maximum action -- you need this incredible figure in your collection, so order yours today!

[Figure Size]: Approximately 15cm tall
[Materials]: ABS, PVC

[Set Contents]:
- Main figure
- Interchangeable weapon-holding hands (x1 each, left and right)
- Beam Scissors
- Effects for Beam Scissors
- Tamashii Stage exclusive joint (Tamashii Stage is not included)

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM90.00

Daban 6602S MG 1/100 Epyon Gundam Chrome Color Version

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2024
Estimate arrival : JAN 2025

- P-O Price RM90.00
- Deposit RM20.00, Balance RM70.00
- We will inform to make balance RM70.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Daban 6602S MG 1/100 Epyon Gundam Chrome Color Version 

Brand : Daban
Code : 6602S
Scale : 1/100
Grade : Master
Model : Epyon
Version : Limited Chrome Color

Please note that this is Non-Bandai product

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Request Stock
img
PO PriceRM390.00

[PRE-ORDER] The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Color Version)

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : JUN 2022 
Estimate arrival : JULY-AUG 2022

- P-O Price RM390.00 
- Deposit RM100, Balance RM290.00 
- We will inform to make balance RM 290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Version)

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
SAVERM52.00

[Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)

MG 1/100 Nataku/ Altron Gundam from Super Nova (Blue Version)


- MG 1/100 Altron (Blue Version)
- From Super Nova
Pre-painted plastic, no paint required.
- Self assembly required

Kindly note that this kit is a NON-BANDAI product.

RM148.00
img
SAVERM49.90

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM100.00
img
SAVERM97.60

P-Bandai Exclusive: MG 1/100 Heavyarm Gundam EW (Reissue)

Second batch is open for Pre-order.

Estimated delivery: Jan, 2018

The long waited Gundam W Endless Waltz gunpla!

Comes armed: double gatling gun
This is prepainted plastic model kits, require simple snap-fit assembly only. .

RM302.40
img
SAVERM13.90

[11] FG 1/144 XXXG-01S2 Altron Gundam

[11] XXXG-01S2 Altron Gundam (FG)


This is a 1/144 plastic model kit of Altron Gundam in "Mobile Suit Gundam Gundam W". The ball joint is used for the neck, wrist, hip joint, ankle, realizing smooth movement. Chest front armor and torso are separate parts, waist can be rotated, waist armor can move front part and side part. The development of the dragon hang of both arms can be reproduced without replacing the wrist. Dragon hang opens and closes the lower jaw. The back random binder reproduces the development of beam cannon and the left and right expansion of wing. Twin beam Trident can remove the beam part, can be detached to the left random binder.

RM28.00
img
SAVERM40.20

[EXPO] RG 1/144 Wing Gundam Zero Ew (Gloss Edition)

RG 1/144 Wing Gundam Zero EW (Pearl Gloss Ver.)


The ever iconic Wing Gundam Zero Custom from Gundam Wing Endless Waltz returns in Real Grade Pearl Gloss Edition - a limited event item!!! The wing structure of this Wing Zero interpretation are based on application of current real world technology used in aircraft. Considerable thought has been put into heat protection and machine protection as well as design and function for an otherwise unorthodox mecha design. Even the flexible feather shaped extremities incorporate elements from thrust vectoring mechanisms of combat aircraft. Twin Buster Rifle and beam sabers included. Approx 5" tall. Runner x9, Instruction Manual x1, Realistic decal x1.

RM159.70
img
SAVERM62.00

[Super Nova] 1/100 MG XXXG-01S2 Nataku Gundam

MG 1/100 Nataku Gundam from Super Nova.

Kindly note that this kit is a NON-BANDAI kit.

RM138.00
img
SAVERM238.80

Hi-Resolution Model 1/100 Wing Gundam Zero Ew

Hi-Resolution Model 1/100 Wing Gundam Zero Ew


- Reality and weight feeling by different materials, supple wing movements, amazing movable wing Gundam Zero is converted to high resolution (high resolution).

-ACTION-
- Abundant movable gimmicks are provided for each part, enabling reproduction of an impressive scene in the play.
- The distinctive Buster rifle has four stages of deformation, realizing various poses.

-FRAME-
· The inner skeleton frame combines resin material and metal parts to achieve both reality and weight. Enclosed in painted finished product state.

-ARMOR-
· Adopt plating and gross injection, express realistic texture in parts.

-GIMMICK-
· Each part is expanded when zero system is reproduced. I peeped the frame through the gap of the armor and reproduced armor with solid appearance.
- Adopting a design arrangement that emphasizes images in the play, such as deployment to six feathers.
- By combining with a shield it is possible to deform to the flight form.

- accessories
· Twin Buster Rifle x 1
· Beam · saber x 2
· Shield x 1

- Product content
· Completed frame x 1
· Molded article x 15
· Lead wire x 2
· Instruction manual x 1

RM480.00
img
SAVERM120.00

P-Bandai: MG 1/100 XXXG-01SR Gundam Sandrock Custom EW

P-Bandai: MG 1/100 XXXG-01SR Gundam Sandrock Custom EW


Reissue Date : Feb 2020
Estimate Delivery : March 2020

Package include
- Heat Shotel x 2
- Diffusing Cloak
- Beam Machine Gun x 1
- Shield x 1  
- Sandrock Water Decal

RM300.00
img
SAVERM284.60

P-Bandai: MG 1/100 Wing Gundam Zero Custom EW + Drei Zwerg [Special Coating]

P-Bandai: MG 1/100 Wing Gundam Zero Custom EW + Drei Zwerg [Special Coating] 


Release date : Jan 2018
Estimate delivery : Feb 2018

RM595.40
img
SAVERM438.00

Hi-Resolution Model 1/100 Wing Gundam Zero Ew [Special Pearl Coating Ver.]

The impressive wing Gundam zero from the OVA "Gundam wing: endless Waltz" is getting the hi-resolution BAN216746 treatment! Based on its new appearance in the Gundam wing EW manga, it now features a transforming Neo-Bird mode, opening armor gaps for zero system use, and 6 wings. Each hi-resolution BAN216746 kit comes with a combination plastic and die cast pre-built frame that offers extraordinary detailing and posing capabilities. Armor is made of high quality plastic materials that has no need for paint or alteration and features different finishes ranging from high gloss to Pearl to metallic. Set includes twin Buster rifle, beam saber x2, 2 wires, and shield. Gundam frame x1. Runner x15. Instruction manual x1.

RM760.00
img
SAVERM49.80

[028] RG 1/144 OZ-00MS Tallgeese EW

The highly anticipated Tall geese EW now joined the RG kit series ! Unique to the RG line, the Tall geese EW utilizes several gimmicks to emulate the heavy armor and thrusting power of the mobile suit as seen in the anime. 


The "Super Vernier's", which provide the suit's "murderous acceleration" never had its internal structure fully exposed in the "Gun dam Wing" anime, but is now given form making this an RG exclusive gimmick ! 

The suit's complex structure due to being a smaller mobile suit, utilizes insert molding technology to allow for both dense details and easy assembly. 

Locking mechanisms in various joints of the kit allow the Tall geese to use its massive Dober Gun, the suit's largest weapon, with one arm just like that in the anime! 

The Dober Gun also contains intense detailing such as a cartridge exchange, blowback gimmick and a grip that allows for even more freedom in articulation. Combine this kit with the RG 1/144 Wing Gun dam EW and create intense battle scenes! 

Accessories: 
- Dober Gun x1
- Circle Shield x1
- Beam Saber x2

RM100.00
img
SAVERM80.00

[Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver.

[Super Nova - MoXin] XXXG-OOWO  MG 1/100 Wing Gundam EW Ver.


- The wing feather effect is included
- Drei Zwerg Weapon Unit is included
- Dedicated Action Base is incduded

RM180.00
img
SAVERM34.90

[02] HG 1/100 Shen Long Gundam

The Shenlong Gundam with its powerful extending unfolding right hand that features a dragon themed head with flame throwers. 


Accesories:
- Beam glaive
- Shield
- Effect parts - flame throwers.

RM55.00
img
SAVERM308.60

Hi-Resolution Model 1/100 Wing Gundam EW

A Bandai Hobby Online Shop exclusive release of the Wing Gundam from "Gundam Wing" in its EW appearance. New opening gimmicks have been incorporated into the design of the wings while still allowing it to be able to transform into Bird Mode. 

The Hi-Resolution model series comes with a combination plastic and diecast pre-built frame that offers extraordinary detailing and posing capabilities. Armor is made of high quality plastic materials that has no need for paint or alteration and features different finishes ranging from high gloss to pearl to metallic. Set includes Buster rifle with removable energy cartridges, energy cartridge racks, beam sabers, and shield. 

Accessories:
- Buster rifle
- 2 x Beam sabers
- Shield

Set content:
- Gundam frame x1
- Runner x15. 
- Water decal
-  Instruction manual x1

RM500.00
img
SAVERM40.00

P-Bandai: HGAC 1/144 Leo [Space Type]

Based on the Mobile Suit Gundam Wing anime series, the Leo model kit is in the 1/144 scale and becomes a fully articulated figure once complete. Leo is produced in special purple coloring and includes a wide selection of weaponry.

Accessories: 
- Mega beam gun
- Drum gun
- 2 x Beam sabers
- Shield
- Long type beam rifle
- Short type beam rifle
- Beam rifle for colony

RM100.00
img
SAVERM41.00

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam


- MG 1/100 Heavyarms Custom 
- From Super Nova
Pre-painted plastic, no paint required.
- Self assembly required

Set contains:
- 2 joker mask
- 4 Gatling guns
- Gatling gun holder

Weapon Holder is not included.

Kindly note that this kit is a NON-BANDAI product.

RM159.00
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
img
SAVERM30.00

[M.J.H] 1/100 High Resolution Wing Zero Custom Gundam

  • [M.J.H] 1/100 High Resolution Wing Zero Custom Gundam
  • Brand: MJH 
  • Grade: HIRM 1/100
  • Box Size (L x W x H): 42.4cm x 28.4cm x 9cm

RM150.00
img
SAVERM23.90

[223] HGAC 1/144 Maganac

- From the TV anime [New Mobile Suit Gundam Gundam W], general unit of the MS unit Maguanac team composed of 40 units is three-dimensionalized with HGAC!

- Based on the concept of [Fine Build], adopt a structure pursuing ease of assembly.
- Shield for backpack, Heat Tomahawk for mount at the waist.
- Shoulder armor 's flip up gimmick.

[accessories]
Beam rifle x 1
- Heat Tomahawk x 1
- Shield x 1

[Product content]
- Molded parts x 6
- Foil seal x 1
- Marking stick x 1
- Instruction manual x 1

RM48.00

Showing 1 - 30 of 137 products