• Home
  • Showing Gundam Model Kits + HIGH GRADE (HG) 1/144 product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + HIGH GRADE (HG) 1/144 product(s)

Showing 391 - 420 of 1106 products

Quick View
img
SAVERM43.90

[086] HGUC 1/144 RX-93 Nu Gundam

  • Item Size/Weight : 31 x 20 x 9.3 cm
  • Weight: 552g
  • Accessories: beam rifle, shield, New Hyper Bazooka, Beam Saber
  • Comes with installation manual + snap & fit.
Similar Nu Gundam Modelling kit you may found on our website:

RM105.00
RM105.00 Request Stock
Quick View
img
SAVERM32.90

[R17] HG 1/144 Perfect Strike Gundam

  • Accessories: 350mm gun launcher, anti-ship Vulcan 120mm, anti-ship sword (belt Geberu Pradesh), Beam boomerang (Midas Messer), rocket anchor (Panzer Eisen), Yale Pack, Beam saber x� 2, hand grip for arms (left and right)
Wikipedia
The GAT-X105+AQM/E-YM1 Perfect Strike Gundam is the heavy armed variant of the GAT-X105 Strike. It was featured in the eyecatches of the Mobile Suit Gundam Seed HD Remastered. Later, the Perfect Strike Gundam made its first debut in the episode 36. The unit is primary piloted by Mu La Flaga.
 
The Perfect Strike Gundam is the possible end-point of how the original three Striker Packs of the GAT-X105 Strike Gundam could have been used. The combination allows the Strike to have the agility of the Aile Strike Gundam, the heavy firepower of the Launcher Strike Gundam and the close range power of the Sword Strike Gundam at the same time, making it virtually the perfect weapon without losing performance. As well, having all three Striker Packs connected at the same time allows the Strike Gundam to stay active for much longer than having just one Striker Pack on its back.
There are a few visible changes to the Aile Stiker Pack as it's main wings been moved back slightly to make room for the connection points for the "Schwert Gewehr" Anti-Ship Sword, "Agni" Hyper Impulse Beam Cannon and four extended batteries connected on the Aile Striker Pack's back.
 
List of weapons:
  • "Igelstellung" 75mm Multi-Barrel Anti-Air CIWS
  • "Armor Schneider" Combat K-nife
  • 57mm High-Energy Beam Rifle
  • Shield
  • Beam Saber
  • "Schwert Gewehr" 15.78m Anti-Ship Sword
  • "Panzer Eisen" Rocket Anchor
  • "Midas Messer" Beam Boomerang
  • "Agni" 320mm Hyper Impulse Beam Cannon
  • 120mm Anti-Ship Vulcan Gun
  • 350mm Gun Launcher

RM68.00
RM68.00 Request Stock
Quick View
img
SAVERM26.60

[031] HG 1/144 Clanche Custom

  • Accessories: Dodds rifle, shield, beam saber
  • Item Size/Weight : 30 x 19.2 x 6.8 cm / 275g.

Wikipedia Information about Gundam Age Clanche Custom:
The RGE-G2100C Clanche Custom is a custom variant of the RGE-G2100 Clanche featured in the Kio Arc and Three Generation Arc of the anime series Mobile Suit Gundam AGE. The unit is piloted by Seric Abis.

The RGE-G2100C Clanche Custom is a sea green-colored variation of the RGE-G2100 Clanche. It is primarily assigned to squad leaders[1]. Just like the Gundam AGE-2, the Clanche Custom is designed as a high speed combat unit, able to turn into a fighter-like form which flies at a greater speed than that of its MS mode. While in flight mode, it is able to use two beam cannons in place of wings. It is equipped with the basic weapons such as the DODS rifle, three beam sabers, two beam vulcans, and a shield.

Weapons & Shield:
  • DODS Cannon - Based on the ones used by the AGE-2DB Gundam AGE-2 Double Bullet, the Clanche Custom is equipped with two beam cannons in place of its wings and usable only in flight mode.
  • Beam Saber - The standard close range combat armament for most Federation mobile suits. The beam saber is a sword-like beam weapon that is used for close combat. The beam saber can easily cut through most mobile suits. A beam saber is stored in each of Clanche's wrists, while another beam saber is stored in the shield.
  • Beam Vulcans - The beam vulcans are located in Clanche's head. These head mounted beam weapons have a high-rate of fire but have little power and are generally ineffective against advanced Vagan mobile suits. However these weapons are ideal to shoot down fast moving, lightly armored targets such as missiles and vehicles.
  • DODS Rifle - The DODS Rifle is the standard ranged combat weapon for most Federation mobile suits. The Clanche's DODS Rifle is a mass produced version of the AGE-2 Gundam AGE-2 Normal's Hyper DODS Rifle.
  • Shield - The Clanche's basic defensive armament. It is a fairly standard shield usually mounted on the left forearm. It can defend against both beam and physical attacks.

RM50.30
RM50.30 Request Stock
Quick View
img
SAVERM32.90

[032] HG 1/144 Gundam AGE-FX Burst

- Accessories: Long rifle guru Stan, funnel × 6, funnel × 8 (short), effect parts × 18,
Dedicated pedestal

RM75.00
RM75.00 Request Stock
Quick View
img
SAVERM28.70

[033] HG 1/144 Shaldoll Rogue

  • Accessories: Buster Dodds, beam ax, saber

RM48.20
RM48.20 Request Stock
Quick View
img
SAVERM26.60

[011] HG 1/144 Over Flag

  • SVMS-010 Over Flag (HG)
  • Item Size/Weight : 29.7 x 18.9 x 5.8 cm / 234g
The SVMS-01O Over Flag (aka Over Flag), is a custom enhanced Flag by Professor Ralph Eifman and Billy Katagiri. This elite series of the Union Flag was a limited production mobile suit for the ace pilots of the Anti-Gundam Investigative Squad "Over Flags" (The 8th Independent Air Tactics Squad).

Weapons
  • 20mm Machine Gun
  • 200mm Linear Rifle
  • Defense Rod
  • Leg Missiles
  • Sonic Blade
  • Chaff Flare Dispenser
  • Missile Pods

RM45.30
RM45.30 Request Stock
Quick View
img
SAVERM19.90

[002] HG 1/144 Union Flag Mass Production Type

  • This simple HG kit of mobile suit Union Flag from "Gundam 00" will be fully articulated and can switch between MS Mode and Flight Position upon completion, with plenty of joints to allow for recreating its various signature action poses. Weapons include a linear rifle, sonic blade (plasma sword), and a defense rod. A sheet of foil stickers is included for detail.
  • Item Size/Weight : 29.7 x 19 x 5.3 cm / 234g

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM98.90

HG 1/144 GN Arms Type E + Gundam Exia

  • action base included
The GN Arms is a limited-produced series and the successors to the GNR-000 GN Sefer series. Only two units were created and both of them were modified to reflect the combat themes of their respective assigned Gundams; GN Arms Type-E is fitted to complement GN-001 Gundam Exia. Although fitted after Gundam Exia, GN Arms E retains similarities to its counterpart and its components are one part of an overall tactical support system.

For weapons, the GN Arms was designed to utilize different weaponry between its fighter and mobile armor (MA) form. Although armed with a specialized silhouette, it has limitations depending on its form. The units are armed with two sets of weaponry: standard and customized.

The standard weaponry is featured in both units; both are armed with a pair of Large-Size GN Cannons and GN Claws. The cannons are hidden at the top-rear hatch, right on top of the thrusters. The top hatch provides protective shielding for the cannons as it is the most powerful (comparable to Gundam Virtue’s GN Bazooka) and vulnerable (its destruction can destroy the entire craft) in combat. The GN Claws is a three-pronged weapon inherited from the Gundam Avalanche Exia Dash armor system. It is a melee-type weapon, meant for close range bird-of-prey style attacks. However, the original GN Claws was built with beam sabers for extended reach and had greater attack capabilities against its enemy target(s); CB engineers (for some unknown reasons) removed that ability, limiting these particular GN Claws for mainly latching and tearing against its target(s). The claws are located at the underbelly of the GN Arms; they’re folded within the lower platform until deployed. However, while its standard weaponry makes it formidable, it is its specialized weaponry that gives the GN Arms its unique combative qualities.

GN Arms E's customized equipment are its pair of Large-Size GN Swords and the GN Guns. The swords are larger versions of Exia’s swords; they’re GN particle-laced vibro-swords designed to cut through large targets (ex: mobile armors, spaceships, asteroids, etc). However, they’re specifically designed to puncture through GN Fields in case their enemy(s) managed to acquire GN technology. Designed after Exia's primary weapon, the GN Guns are built behind the sword. Although called guns, their firepower is comparable to Dynames' GN Rifle. The overall weapons silhouette gives the pair of gun-swords a focus in close-quarters combat (CQC), but balanced for mid-to-short range firing solutions.

In terms of systems, the GN Arms is powered by GN particles. The units are built with GN Condensers to store a limited supply of particles; its pilot must be mindful of its particle reserves or risk a power-down in a compromising tactical position. However, the units are designed with a docking system that connects their respective Gundams’ GN Drive to help recharge their particles for extended operation usage. Celestial Being engineers also installed a GN Field for added protection against enemy attacks. While not built into the GN Arms, either units can utilize the Trans-Am System through their Gundams during emergency situations to temporarily enhance three times their normal combat capabilities. However, its overall systems risk reduction in performance after all its particles are expended.

For combat, its native form is a fighter: GN Arms Mode. Able to fly in outer-space and Earth’s atmosphere, it can only utilize the GN Guns and Large-Size GN Cannons for high-speed heavy assault combat; it relies on its speed to flank and shoot down its target(s), similar to traditional aerial dog fighting. Unfortunately, its remaining weapons and abilities are offline in this form and its weapons are locked in place, lacking flexibility and dynamic firing solutions. As fixed weapons, they are limited to shooting down its target relative to the body positioning of the unit itself. While the units can deploy a GN Field, it was never used in this form; it suggests GN Arms either can't deploy its GN Field or has limited usage in its fighter form. Another weakness are the units' limitations in traveling between Earth and space; to compensate for those weaknesses, the Assault Container can be deployed to for enhanced tactical operations.

Celestial Being engineers realized the GN Arms have limitations exiting Earth’s atmosphere and its overall mass is too great to fit into a linear train for a ride back into space. While not designed for the sole purpose of being an atmospheric shuttle, the Assault Container (AC) is a heavily armed tactical mini-MS carrier that can safely house Exia and GN Arms through some of the most treacherous conditions; the GN Arms bears little involvement in operations when docked.

When combined with the AC, the GN Arms’ overall systems are not utilized other than its thrusters (providing additional thrust power to account for its added weight into the AC). Its overall body is safely shielded within the confines of the AC along with its respective Gundam (although they’re not docked together in any special configuration). Combined with the Gundam and powered by its GN Drive, the pilot of the GN Arms is transferred through a special lift and ported over the AC's helm for manning its flight controls and weapons; the AC is in complete control and the GN Arms is just along for the ride. However, should the container become compromised, the pilot can immediately transfer back into the GN Arms and eject Exia to escape and can recombine as a MA for advanced combat.

When transforming into GN Armor, the pilot expands the unit into a large exo-suit combat system. The GN Arms opens in such a way that Exia simply "falls" its back onto the GN Armor, lock in place, and utilize its systems in a matter of seconds. The cockpit folds up and rotates to the rear of its frame. The mid-section expands and exposes a special docking module that docks directly with Exia's GN Drive Cone. The lower modules fold out to reveal its GN Claws and foot platform to dock with Exia's legs. Its fixed weapons are now unlocked and widened for Exia's arms to dock and utilizing it as an extension of its arms.

In GN Armor combat, the armor is co-piloted by Lasse and Setsuna; the full aspects over its controls are not fully defined and its capabilities is based on observation. In battle, Setsuna has full control over Exia while Lasse seems to handle mainly propulsion and the MA's cannons during combat. Setsuna's influence over the MA seems to be limited to its control over the armor's GN Guns, Large-Size GN Swords, and the GN Claws; he relies on Lasse for evasive maneuvers, firing the cannons, and deploying its GN Field against enemy fire. Should the the GN Arms becomes critically damaged, Exia can simply pull itself out of the MA and resort to MS combat.

Overall, the GN Arms units had proven their value in combat, however, it would be the last of its kind. While Celestial Being engineers continued to produce new support units in its GNR series, Celestial Being ceased creating of any kind of mobile armor. Instead, Celestial Being engineers focused on developing equipment to enhance the combat capabilities of their Gundams; it eliminates the need for mobile armors since their individual capabilities can surpass them. However, the combat and technical data of the GN Arms was used to help CBS-74 Ptolemaios 2, a multi-purpose warship that supplements and succeeds the GN Arms as the Gundams' most powerful combat support unit.

RM230.00
RM230.00 Request Stock
Quick View
img
SAVERM33.90

[062] HG 1/144 Gundam Astraea Type-F

  • Gaiden Official MS, Astraea Type F of the new armed goods! 
  • New settings, including militants, HG reproduced as heavily armed militants were used to scale! 
  • Basic protocol as Astraea armed GN sword, shield, GN Launcher 
  • GN beam rifle comes. 
  • Add new armament: GN missile Hand, GN pistol, bazooka for jinx 
  • New configuration: GN hammer ([thorn] GN reproduce the clear green parts of the jet of particles. Comes with a wire during injection can represent a hammer.) 
  • Type F2 also available to the Assembly in the selection formula. 
  • Accessories: proto GN sword, GN launcher, shield, GN beam rifle, GN missiles hand 
  • GN beam saber × 2, GN pistol (with holster) × 2, bazooka jinx

RM74.00
RM74.00 Request Stock
Quick View
img
SAVERM39.90

[152] HGUC 1/144 RGM-96X Jesta Cannon Gundam

  • Jesta Cannon, the heavy weapon equipped variant of Jesta, featured in "Mobile Suit Gundam UC episode 6", appears as HGUC. 
  • The distinctive beam cannon and multi launcher on the shoulders have moving gimmicks. 
  • Includes weapons and hand parts which are compatible with Jesta. 
  • runner x10, foil sticker x1, tetron sticker x1, instruction manual x1

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM30.90

[153] HGUC 1/144 Unicorn Gundam 02 Banshee Norn (Unicorn Mode)

Banshee Norn in its Destroy mode configuration with all new translucent orange frame parts. Beam magnum with revolving launcher can mount a beam jitters and also comes with spare magazine clip. Armed Armor XC and Armed Armor DE are fully deployed, revealing the massive "mane" of this black lion themed Gundam. 

Accessories: 
- Beam Magnum (with revolving launcher)
- Shield,armed armor DE
- Beam saber × 2
- Armed armor VN

RM70.00
RM70.00 Request Stock
Quick View
img
SAVERM29.90

[151] HGUC 1/144 MS-06R-1A Zaku II (Black Tri-Stars Custom)

  • Accessories: - Zaku bazooka, Zaku-machine gun, Heat Hawk, shield weapon rack, fist (left), for hand holding rifle (left and right), for hand held saber (right)

RM66.00
RM66.00 Request Stock
Quick View
img
SAVERM26.90

[034] HG 1/144 G Xiphos

  • Accessories: Heat Sword high output, Dodds Buster H x  2

RM62.00
RM62.00 Request Stock
Quick View
img
SAVERM27.90

[035] HG 1/144 Gundam AGE-1 Full Glansa

  • Built for the final battle of Mobile Suit Gundam AGE, the Full Glansa joins the HG line! 
  • Developed after the the AGE-1 Flat was critically damaged, this upgraded MS boasts high mobility and powerful armaments. 
  • 3 kits in one- Glastron Launcher is removable to recreate the AGE-1 Glansa, and Glansa armor can be removed to create the AGE-1 Flat! 
  • Glastron Launcher can rotate into firing mode.
  • The upgraded Gundam AGE-1 Flat, the Full Glansa features the massive Glastron Launcher for added firepower and mobility! 
  • Accessories: Shield Rifle x2, Glastron Launcher x2, Missile Launcher x2, Beam Saber x2

RM68.00
RM68.00 Request Stock
Quick View
img
SAVERM60.80

[156] HGUC 1/144 RX-0 Full Armor Unicorn Gundam (Unicorn Mode)

  • Accessories: Hyper Bazooka x 3, beam saber x 4, x 2 anti-ship missiles, grenade Launcher x 2, hand grenade (6) x 4, Beam Gatling Gun x 6, shield (Unicorn mode) x 3, saber handle (right and left), flat hand (left and right), hand holding rifle (right), x 2 Posts for large booster, Beam Magnum

RM119.10
RM119.10 Request Stock
Quick View
img
SAVERM33.90

[103] HGUC 1/144 RGZ-95 ReZEL Gundam

  • Beam Saber, Long Beam Rifle, Shield, and Body Block for Transformation
  • Item Size/Weight : 31.3 x 19.2 x 8.3 cm / 381g

RM86.00
RM86.00 Request Stock
Quick View
img
SAVERM12.00

[EW-01] HG 1/144 Wing Gundam Zero Custom

Wing Zero Custom features its characteristic Twin Buster rifle which can separate into 2 separate rifles and one beam saber. Wings are articulated and can fold to cover itself for atmospheric re-entry. An additional expressive torso has been provided to allow one to pose the twin buster rifle in its characteristic pse.

Accessories:
- Twin buster rifle
- Beam saber

RM47.90
RM47.90 Request Stock
Quick View
img
SAVERM15.90

[EW-02] HG 1/144 Tallgeese III

  • A Mobile Suit Gundam W Endless Waltz Shin kit version of the OVA series.
  • Realistic weapons such as Maximum Heat Mega Canon and rods

RM32.00
RM32.00 Request Stock
Quick View
img
SAVERM12.00

[EW-06] HG 1/144 Gundam Nataku

Also known as "Altron Gundam Ver EW", this green dragon themed Gundam features articulated dragon heads that can reach out a distance from the body to bludgeon foes. Additional static arm pieces are included to extend the length to the unbelievable range used in the Endless Waltz OVA. Beam trident weapon comes with a molded hand for natural hand position.

RM47.90
RM47.90 Request Stock
Quick View
img
SAVERM16.10

HG 1/144 Serpent Custom

  • a kit series in the Version OVA [Mobile Suit Gundam W Endless Waltz (New).
  • Realistic weapons like Gatling Gun, and Double Beam Cannon.

RM31.80
RM31.80 Request Stock
Quick View
img
SAVERM20.90

[EW-05] HG 1/144 Gundam D-Hell Custom

The Death scythe Hell as it appears in "Endless Waltz" features its trademark scythe as well as an active cloak that can wrap around its body to conceal it from enemies. An additional torso is provided to allow for more expressive poses. 


Runner x4, foil sticker x1, instruction manual


Item Size/Weight : 29.1 x 19.1 x 6.2 cm / 230g

RM39.00
RM39.00 Request Stock
Quick View
img
SAVERM15.90

[EW-07] HG 1/144 Gundam Sandrock Custom

This version of the Sandrock as used in "Endless Waltz" features heat shotels with interchangeable handles to be stored on the backpack as well as an original shield to perform the "Cross Crusher" attack. An additional torso is provided to allow for more expressive sword poses.

RM32.00
RM32.00 Request Stock
Quick View
img
SAVERM10.70

[EW-03] HG 1/144 Gundam H-Arms Custom

Heavy arms Custom features its signature double twin Gatling guns as well as a full plethora of micro missile pods. Missile hatches on shoulders swivel open while leg missiles use replacement parts to simulate open and closed hatches.

RM37.20
RM37.20 Request Stock
Quick View
img
SAVERM30.60

HG 1/144 Gundam X

RM58.30
RM58.30 Request Stock
Quick View
img
SAVERM30.60

HG 1/144 Gundam X Divider

  • The GX-9900-DV Gundam X Divider (aka Gundam X Divider, X Divider) is a custom modified version of a GX-9900 Gundam X in the After War Gundam X. It is initially piloted by Garrod Ran, but is later piloted by Jamil Neate after Garrod traded-up for GX-9901-DX Gundam Double X.

RM58.30
RM58.30 Request Stock
Quick View
img
SAVERM31.90

[024] HGUC 1/144 RMS-141 Xekueins Gundam

  • The RMS-141 Xeku Eins (Type 3 Armament) is a heavy attack version of the Xeku Eins. Originally intended for attacking and defending space fortresses, this type is armed mainly with projectile weapons. Its main weapon is a large 120mm machine gun with a rate of fire of 360-540 rounds per minute, and it carries roughly 6,000 rounds of ammunition in each of the huge drum magazines attached to its shoulders. The mobile suit is also equipped with a pair of shields that connect to the movable frame mounts in its shoulders, and these shields in turn provide beam saber racks and latches for optional equipment such as clay bazookas, bazooka magazines, and smoke dischargers. This is effectively the standard configuration of the Xeku Eins. The pilots of the instructor corps use this version to wipe out the regular Federation Forces mobile suits stationed at Pezun, and after declaring themselves the New Desides, they continue using it throughout the Pezun Rebellion of UC 0088.

RM64.00
RM64.00 Request Stock
Quick View
img
SAVERM21.90

[031] HGUC 1/144 AMX-107 Bawoo Production Type Gundam

The AMX-107 Bawoo makes its (re)appearance in 1/144 scale in the HGUC line, this time molded in green instead of red! This kit transforms from flight to fight mode just like it does in Gundam ZZ. Accessories include a beam saber and rifle as well as interchangeable hand parts.

RM50.00
RM50.00 Request Stock
Quick View
img
SAVERM31.90

[155] HGUC 1/144 Gundam Ez8

New model of the popular machine from the Ova 08th MS Team features enhanced articulation and new refined proportion. Beam rifle, shield, beam saber and machine gun included. Parachute pack may be interchanged with backpack on HGUC RX79[G] Gundam.

Accessories: 
- Beam rifle
- 100mm machine gun
- Shield
- Beam saber x 2
- Parachute pack
- Hand grip for saber (left and right)
- Hand holding rifle (right)
- Fist (left)

RM64.00
RM64.00 Request Stock
Quick View
img
SAVERM21.90

[158] HGUC 1/144 Base Jabber Type 89

  • Accessories: one corresponding joint action based

RM50.00
RM50.00 Request Stock
Quick View
img
SAVERM28.90

[018] HG 1/144 RX-78GP01FB Gundam Full Burnern

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern (Often mistranslated as "Gundam "Zephyranthes" Full Vernian") is the upgraded space use version of the RX-78GP01 Gundam "Zephyranthes". It is featured in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory. The unit is piloted by Kou Uraki.


The RX-78GP01-Fb Gundam "Full Burnern Zephyranthes" is a retrofit of the RX-78GP01 Gundam "Zephyranthes" with emphasis on space combat. This equipment was already completed by the time of the Gundam "Zephyranthes"' roll-out, but scheduled tests could not take place due to the damage during the battle with the Cima fleet. Though the GP01 was meant to operate in both Earth and Space, the Core Block System had to be swapped before each battle. After the GP01, still in its Earth configuration, was critically damaged in a battle with Cima Garahau, Anaheim Electronics took the remains of the Gundam and gave it a massive overhaul, creating the Gundam Full Burnern "Zephyranthes". The renovation process was completed in two days, with operational testing being carried out at Anaheim Electronics' Livermore factory.

Its armor is much more streamlined for better mobility in space, and thrusters are mounted in the legs, chest, and shoulder. The air-intakes on the chest are replaced with attitude control thrusters, with the covers expanding during use. Propellant tanks are built into the shins to further extend the operation time of the RX-78GP01-Fb. The backpack is equipped with built-in generators. Four additional thruster units are attached to the feet in the same manner as "shoes". The most noticeable addition to the GP01 are the two Universal Booster Pods on the backpack. They allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result , the pilot has to contend with high G-forces due to overwhelming acceleration.

RM60.00
RM60.00 Request Stock

Showing 391 - 420 of 1106 products