Showing Other Series Kits + OTHERS product(s)

Showing 241 - 270 of 629 products

img
PO PriceRM340.00

S.H.Figuarts CHAR AZNABLE

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
From Mobile Suit Gundam, the Principality of Zeon\'s ace pilot, the Red Comet, Char Aznable, is now available in SHFiguarts.

The Red Comet, Char Aznable, has finally made an appearance in the SHFiguarts series. While pursuing beautiful proportions, the movable gimmicks have been carefully designed to recreate Char\'s famous scenes. In addition, a wide range of poses and scenes can be recreated with the abundant replacement parts.

From Mobile Suit Gundam, the Red Comet, Char Aznable, has finally appeared in SHFiguarts.
The beautiful proportions recreate the graceful pose that is so characteristic of Char.
Pursuit of a range of motion that allows for the reproduction of impressive poses.
Flexible shoulder movement allows for a variety of poses of Char.
The hip joint extension mechanism allows you to recreate a natural sitting pose!
Dynamic action poses are possible using the included beam gun!
Newtype effect parts allow for a wider range of scene reproductions.
Char\'s distinctive facial expression is reproduced.
Comes with a variety of interchangeable facial parts and interchangeable wrist parts.

[Set contents]
Main unit
?Interchangeable wrist parts: 3 types for the left and 4 types for the right
- 4 types of interchangeable facial parts
?Beam gun
?Gun joint
?Newtype effect parts

- Total height: approx. 155mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM178.00

EDDAS 1/100 NGMPM-01 Mass-Production Type Nomes Assembly Model Kits

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2026
Estimate arrival : SEP 2026

- P-O Price RM178.00
- Deposit RM30.00, Balance RM148.00
- We will inform to make balance RM148.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The EDDAS 1/100 NGMPM-01 Mass-Production Type Nomes Assembly Model Kit delivers a premium, highly detailed building experience for mecha enthusiasts. This master-tier kit captures the rugged, utilitarian aesthetic of the iconic mass-production grunt suit with exceptional engineering.

Key Features
* 1/100 Scale Precision: Stands as a prominent, highly detailed centerpiece for your mecha collection display.
* Snap-Fit Assembly: Builds smoothly without any glue or cement required for tight joints.
* Advanced Articulation: Features multi-jointed limbs and a dynamic inner frame for striking action poses.
* Modular Arsenal: Includes a mass-production rifle, tactical shield, and customizable hardpoints for weapon mounting.

Specifications
* Scale: 1/100
* Model Line: NGMPM-01
* Material: High-grade ABS and PS plastic
* Difficulty: Intermediate
* Model Height: 19cm
* Material: POM, ABS, PS, Metal

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM380.00

S.H.Figuarts Jonathan Joestar

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM380.00
- Deposit RM50.00, Balance RM330.00
- We will inform to make balance RM330.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
This is a posable action figure.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM198.00

Nuke Matrix - 1/12 Fantasy Girl Series Night Shadow Hunt

This is a P-O Product

Please read all the detail and condition before make order. 
Estimate arrival : 1-2 MONTHS AFTER PRE-ORDER

- P-O Price RM198.00 
- Deposit RM30, Balance RM168.00 
- We will inform to make balance RM 168.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • Model : Hurricane Assault Revenger: Prototype Yaeger 
  • Series : Cyber Forest Fantasy Girl
  • Brand : Nuke Matrik
  • Scale 1 /12

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM168.00

[ATK Girl Series] Qingyuan Zhenjun, Yang Yan (Normal Color) 将魂姬 拼装机娘

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  JUN 2022 
Estimate arrival : JULY 2022

- P-O Price RM168
- Deposit RM30, Balance RM138
- We will inform to make balance RM 138.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

[ATK Girl Series] Qingyuan Zhenjun, Yang Yan 
??? ???? [?????????] ???? - ??

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM320.00

S.H.Figuarts Narumi Gen

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM320.00
- Deposit RM50.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Narumi Gen from the anime "Kaiju No. 8" joins the "S.H.Figuarts" action-figure lineup from Bandai! He's sculpted with proportions inspired by his appearance in the show; he's supremely posable, too, so you can recreate lots of awesome poses! His large custom weapon is included, which features a transformation gimmick to expand the scope of play. Two interchangeable faces and an interchangeable hair part are also included, so you can display him with his hair pulled back for battle. As a bonus part, an interchangeable face for the "S.H.Figuarts" Kaiju No. 8 is also included! Order him for your own collection today!

[Figure Size]: Approximately 14.5cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable faces (x2)
Interchangeable hands (left and right, x2 each)
Interchangeable hair parts
Weapon
Facial expression for S.H.Figuarts Kaiju No. 8 (figure not included)

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM170.00

S.H.Figuarts Mario (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM170.00
- Deposit RM50.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Bandai's awesome "S.H.Figuarts" fully posable figure of Mario himself from "Super Mario" is back! He's fully articulated to recreate his iconic poses from any of his many video game appearances. He comes with a Super Mushroom, a "?" block, a coin and a coin stand. Don't miss this chance to add one of history's most beloved video game characters to your own collection -- place your order today!

[Figure Size]: Approximately 10cm tall
[Materials]: ABS, PVC


[Set Contents]:

Main figure
Interchangeable hands (left and right)
Super Mushroom
Question Mark Block
Coin
Coin Support
Base mounting parts (back)
Base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM170.00

S.H.Figuarts Luigi (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM170.00
- Deposit RM50.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Bandai\'s awesome \"S.H.Figuarts\" fully posable figure of Luigi from \"Super Mario\" is back! He\'s fully articulated to recreate his iconic poses from any of his many video game appearances. He comes with a brick, a red shell, and a base for display. Don\'t miss this chance to add one of history\'s most beloved video game characters to your own collection -- place your order today!

[Figure Size]: Approximately 11cm tall
[Materials]: ABS, PVC


[Set Contents]:

Main figure
Interchangeable hands (left and right)
Brick Block
Red Shell
Red Shell joint parts set
Base mounting parts (back)
Base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM330.00

S.H.Figuarts Yoshi (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2026
Estimate arrival : APR 2026

- P-O Price RM330.00
- Deposit RM50.00, Balance RM280.00
- We will inform to make balance RM280.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Here comes Yoshi! The adorable green dinosaur from the "Super Mario Bros." video games returns to the "S.H.Figuarts" action-figure series from Bandai, and he's ready for fun! He comes with an extended tongue, interchangeable arms and hands, and a polka-dotted egg to hurl at enemies; he also has a special figure stand and back attachment so either Mario or Luigi can ride on him! Order him today and get ready to recreate all your favorite "Super Mario Bros." scenes!

[Figure Size]: Approximately 11cm tall
[Materials]: ABS, PVC

[Set Contents]:

Main figure
Interchangeable right hand part
Yoshi's egg
Interchangeable tongue 
Interchangeable eye part
Back part for Mario
Back part for Luigi
Base for display

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM260.00

S.H.Figuarts Bowser (SUPER MARIO)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAR 2026
Estimate arrival : APR 2026

- P-O Price RM260.00
- Deposit RM50.00, Balance RM210.00
- We will inform to make balance RM210.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Bowser from the \"Super Mario\" games returns to Bandai\'s \"S.H.Figuarts\" action-figure lineup! He\'s fully posable so he can get into all kinds of trouble, and he has an interchangeable jaw part so he can open and close his mouth, or spit a fireball! A special base for display is included too. Order him for your own collection today!

[Figure Size]: Approximately 13cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable hands (left and right)
Interchangeable lower jaw (x2)
Base for display

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM640.00

HI-METAL R Scopedog

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM640.00
- Deposit RM100.00, Balance RM540.00
- We will inform to make balance RM540.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Bandai adds the iconic Scopedog from \"Armored Trooper Votoms\" to their \"HI-METAL R\" action-figure lineup! While retaining the charm of the Scopedog that allows you to enjoy its unique landing posture, piloting, and combat action, it has been redesigned with die-cast joints and plating that emphasizes the metallic feel. It can be posed holding the heavy machine gun in both hands and facing forward; the upper body has a wide range of motion allowing it to hold the firearm in various positions. The lower body boasts high ground contact, and with its stable die-cast joints, it can assume all kinds of action poses! A posable Chirico figure is included, and he can board the Scopedog when it\'s in its landing pose. The die-cast joints now feature a new metal plating that recreates the texture of bare metal. Gimmicks such as the extending and retracting Arm Punch, the extending and retracting Turn Picks, the rotating turret lens, and the opening and closing visor allow you to experience the Scopedog\'s functions. The heavy machine gun can be configured in its short-barrel mode by swapping the barrel part, and the Chirico action figure comes with an interchangeable righ hand holding the Armor Magnum. Order yours today!

[Figure Size]: Approximately 16.5cm tall
[Materials]: ABS, die-cast, PVC

[Set Contents]:

Main figure
Interchangeable hands (x3 pairs)
Heavy machine gun
Chirico figure set (figure, 1 left and 2 right interchangeable hands, interchangeable head, figure stand)
Spare antenna

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
PO PriceRM290.00

S.H.Figuarts Frieren (Reissue)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM290.00
- Deposit RM50.00, Balance RM240.00
- We will inform to make balance RM240.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Frieren from \"Frieren: Beyond Journey\'s End\" returns to Bandai\'s \"S.H.Figuarts\" action-figure series! She comes with a wide variety of interchangeable faces and hands, as well as magic effect parts. Her cape and skirt are made of a soft material so they won\'t interfere with her poses, too. Order her for your own collection today!

[Figure Size]: Approximately 14cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable faces (x3)
Interchangeable twin tails
Interchangeable hands (left and right, x2 each)
Staff
Magic effect part
Base for magic effect part

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM340.00

S.H.Figuarts Ochaco Uraraka

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The 5th release of the SHFiguarts My Hero Academia series! Introducing Ochaco Uraraka from the TV anime My Hero Academia!

Experience the floating hero action that only Uravity can provide!

Introducing Ochaco Uraraka in the action figure series SHFiguarts! The carefully crafted design and movable mechanism have been thoroughly verified based on the animation in the show, achieving both mobility and beauty of form!
As a special part, it comes with a head part that recreates the appearance of Toga Himiko transforming into Uraraka Ochaco at the climax of the movie!
The moving mechanism was designed by working backwards from the action in the movie, allowing you to create poses that give the illusion of floating!
A wide variety of optional parts are included, allowing you to recreate various situations featuring Ochaco Uraraka!

[Set contents]
Main unit
Interchangeable wrist parts: 4 left, 5 right
Interchangeable wrist parts for both hands
- 3 types of interchangeable facial parts
Replacement hair parts
Loudspeaker
Wire x 2

[Special parts]
Toga Himiko head parts set

- Total height: Approx. 130mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM280.00

S.H.Figuarts Chainsaw Man -The Movie Chainsaw Man Reze-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM280.00
- Deposit RM50.00, Balance RM220.00
- We will inform to make balance RM220.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The 7th release in the SHFiguarts [Chainsaw Man] series! Chainsaw Man in his costume from the movie [Chainsaw Man Reze Arc] is now available in SHFiguarts !!

From the movie \"Chainsaw Man: Reze\", Chainsaw Man is turned into an action figure in his new costume!! Redesigned to match the costume in the movie! With even more mobility! Enjoy the immersive action scenes from the movie! *This product has been produced and commercialized based on the characters and battle scenes from the work.

[A spectacular bloody battle involving love and desire, humans and demons alike] is reproduced in spectacular fashion with SHFiguarts !
The fluttering shirt, unique to this work, makes the action even more realistic.
The chainsaw design has also been completely revamped in this game! Experience the difference!
The tongue of the replacement lower jaw part can be moved freely, allowing you to express the various expressions seen in the movie version.
The action scenes from the movie can be recreated thanks to the carefully crafted range of motion!

[Set contents]
Main unit
- Replacement wrist parts (2 types each for left and right)
Replacement lower jaw parts

- Total height: approx. 150mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM150.00

Tekupiku Suguru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Suguru Geto from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 
These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 
The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM150.00

Tekupiku Satoru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Satoru Gojo from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM150.00

Tekupiku Yuji Itadori

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Yuji Itadori from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM340.00

S.H.Figuarts Metaphor: ReFantazio Protagonist

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The protagonist from Metaphor: ReFantasio is now available in SHFiguarts.

The first in the SHFiguarts [Metaphor: ReFantasio] series. A wide variety of optional parts, such as a [Ride Sword], are included, allowing you to recreate various scenes from the game.

As SHFiguarts is an action figure series, it is possible to recreate a variety of poses.
By using the included riding sword, you can also recreate the long sword riding style.
Two types of interchangeable facial parts are included: [Smiling] and [Combat (mouth open)].
Thanks to the movable structure cultivated in the SHFiguarts series, dynamic battle scenes can be reproduced.
In addition to two interchangeable facial parts, interchangeable wrist parts include three types of left and one type of right, and optional parts include a shoulder bag, sword, riding sword, and a dedicated pedestal set.

[Set contents]
Main unit
- Interchangeable wrist parts: 3 types for the left and 1 type for the right
- 2 types of interchangeable facial parts
Shoulder bag
sword
- Ride sword
Dedicated pedestal set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM150.00

Tekupiku Megumi Fushiguro

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Megumi Fushiguro from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup!

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM180.00

Taiyi Animation - Sixth Demon King Oda Nobunaga Mainan Kit Model

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2025
Estimate arrival : SEP 2025

- P-O Price RM180.00
- Deposit RM20.00, Balance RM160.00
- We will inform to make balance RM160.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Tie Nezha x Taiyi Animation jointly launches [The Sixth Heavenly Demon King - Oda Nobunaga] Mainan Kit Model

Weight: 118t
Height: 25.6m
Model scale: 1/100
Model height: about 27 CM
Material: ABS/PS

Contents:
1. Plate × 28 pieces
2. Yoshi Master Body × 1
3. Warrior Mode - Oda Nobunaga Basic Combat Body × 1
4. General Mode - Tenkabubu Replacement Equipment × 1
5. God Mode - Sixth Heavenly Demon King Replacement Equipment × 1
6. Yakiri Hasebe × 1
7. Masamune × 1
8. Kikuichimonji × 1
9. Sozo Samonji × 1
10. Tsuda Toue Nagamitsu × 1
11. Hikiri Nagamitsu × 1
12. Nanman Fire God Spear × 2
13. Papaya Pattern Thruster × 1
14. Platform × 1
15. Knife Holder × 2
16. Water Decal × 1

########################################################################

Berat: 118t
Ketinggian: 25.6m
Skala model: 1/100
Ketinggian model: kira-kira 27CM
Bahan: ABS/PS

kandungan:
1. Pinggan × 28 keping
2. Badan Induk Yoshi × 1
3. Mod Pahlawan - Badan Tempur Asas Oda Nobunaga × 1
4. Mod Umum - Peralatan Gantian Tenkabubu × 1
5. Mod Tuhan - Peralatan Penggantian Raja Iblis Syurgawi Keenam × 1
6. Yakiri Hasebe × 1
7. Masamune × 1
8. Kikuichimonji × 1
9. Sozo Samonji × 1
10. Tsuda Toue Nagamitsu × 1
11. Hikiri Nagamitsu × 1
12. Lembing Dewa Api Nanman × 2
13. Pendorong Corak Betik × 1
14.Platform×1
15. Pemegang Pisau × 2
16. Pelekat Air × 1


DEPOSIT: RM20.00
DEPOSIT: RM20.00 Request Stock
img
PO PriceRM170.00

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

Height:
Base Form: Approx. 15 cm
This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : JULY 2025

- P-O Price RM170.00
- Deposit RM30.00, Balance RM140.00
- We will inform to make balance RM140.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Armed Form: Approx. 18.5 cm
???? Materials: ABS, PS, Fabric
???? Contents: (25 runner sheets, including 3 with metallic coating)

Main Components

* Jiulian Base Form × 1
* Jiulian Armed Form × 1
* Replaceable [???] Special Helmet × 1
* Fabric Knee Cover × 1
* Alternative Hand Parts × 6 pairs
* Weapon-Grip Hand Parts × 5 pairs
* Facial Expressions × 4, Blank Faces × 5
* Large Chainsaws × 4
* Small Chainsaws × 2
* Meteor Hammer: Starshatter × 1, Replaceable Parts × 3
* Melee Claw Weapons × 2
* Interchangeable Chest Armor × 3
* Water Decals × 2 sheets
* Springs × 2
* LED Light Units × 2, Batteries × 4
* Display Base × 1, Transparent Support Rod × 1, Gray Support Rod × 1, Various Metal Accessories

First Batch Pre-Order Bonus:
* Soft Pink Skin Color Body Parts × 4 sheets
* Soft Pink Skin Color Alternative Hand Parts × 6 pairs
* Soft Pink Skin Color Facial Expressions × 4, Blank Faces × 5
* Exclusive Domestic Bonus: Character-Themed Collectible Transparent Card

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
img
PO PriceRM550.00

S.H.Figuarts Metaphor: ReFantazio Seeker

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM550.00
- Deposit RM50.00, Balance RM500.00
- We will inform to make balance RM500.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
[Seeker] from [Metaphor: ReFantasio] is now available in SHFiguarts.

The second release in the SHFiguarts [Metaphor: ReFantasio] series. The cape has built-in wires, allowing you to recreate various scenes from the game.

As SHFiguarts is an action figure series, it is possible to recreate a variety of poses.
By using the included [Ride Sword], the skill [Ride On Blade] can also be recreated.
The cape has built-in wires, allowing you to recreate various scenes from the game.
As a bonus part, an awakening device holding part that can be used with [SHFiguarts Metaphor: ReFantasio Protagonist] (sold separately) is included.
Interchangeable wrist parts include three types for the left and two types for the right, and optional parts include a sword, a riding sword, and a dedicated pedestal set.

[Set contents]
Main unit
- Interchangeable wrist parts: 3 types for the left and 2 types for the right
sword
Ride sword
Dedicated pedestal set
Pedestal connection parts

[Bonus parts]
[SHFiguarts Metaphor: ReFantasio Protagonist] Awakening Device Handle Parts

- Total height: approx. 190mm
- Material: PVC, ABS, fabric

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
PO PriceRM480.00

Figuarts Zero chouette Ranma

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM480.00
- Deposit RM100.00, Balance RM380.00
- We will inform to make balance RM380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Ranma-chan from the TV anime \"Ranma 1/2\" is now available in Bandai\'s \"Figuarts Zero chouette\" series! The figure\'s base is inspired by the Jusenkyo spring, with Ranma rising up out of the water with a splash! Mist swirls around her, emphasizing her cute smile and pose. You\'ll love her -- order her for your own collection today!

[Figure Size]: Approximately 20cm tall
[Materials]: PVC, ABS

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
PO PriceRM480.00

Figuarts Zero chouette Shampoo

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM480.00
- Deposit RM100.00, Balance RM380.00
- We will inform to make balance RM380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Shampoo from the TV anime \"Ranma 1/2\" joins Bandai\'s \"Figuarts Zero chouette\" figure lineup! Her base is inspired by Jusenkyo Springs, with a splash of water and a swirl of mist heralding her hovering over the spring! You\'ll love her cute smile and relaxed pose -- order her for your own collection today!

[Figure Size]: Approximately 17cm tall
[Materials]: PVC, ABS

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
PO PriceRM1000.00

Figuarts Zero Touche Metallique Gemini Saga

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : APR 2025
Estimate arrival : MAY 2025

- P-O Price RM1000.00
- Deposit RM200.00, Balance RM800.00
- We will inform to make balance RM800.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Gemini Saga from the anime series \"Saint Seiya\" joins Bandai\'s \"Figuarts Zero Touche Metallique\" lineup! He\'s been recreated with his cape flowing behind him as he prepares to unleash his power; parts of his armor are made with plated parts for a luxurious gleam! Clear parts are used for the flame effect parts on the base and the Galaxian Explosion effect part, bringing you right into the world of the anime! The base is modeled after a collapsing temple, with its stone columns contrasting sharply with the vivid flames. A collection sheet is included. Order him for your own collection today!

[Figure Size]: Approximately 21cm tall
[Materials]: ABS, PVC

DEPOSIT: RM200.00
DEPOSIT: RM200.00 Request Stock
img
PO PriceRM800.00

Figuarts Zero Touche Metallique Guts (Berserker Armor)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM800.00
- Deposit RM100.00, Balance RM700.00
- We will inform to make balance RM700.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Guts in his Berserker armor from \"Berserk,\" the globally popular masterpiece of dark fantasy, is now part of the \"Figuarts Zero Touche Metallique\" lineup from Bandai! Ryu Oyama, an artist famous for his sculptures of creatures, has sculpted Guts in a spectacular form, as seen in the Battle of the Sea God! 

The Dragon Slayer great sword is partially plated for an assertive gleam, and the Sea God\'s tentacles are impressively detailed! 

This figure allows you to feel Guts\' overwhelming power -- order it for your own collection today!

[Figure Size]: Approximately 35cm tall
[Materials]: ABS, PVC


[Set Contents]:

* Main figure (including base)
* Collection sheet
* Display support parts

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
img
PO PriceRM1680.00

Soul of Chogokin GX-115 Shinkansen Transforming Robot Shinkalion E5 Hayabusa

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM1680.00
- Deposit RM300.00, Balance RM1380.00
- We will inform to make balance RM1380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The GX-115 Shinkansen from the first season of the TV anime "Shinkansen Transforming Robot Shinkalion" is now available in Bandai's "Soul of Chogokin" series! The Shinkalion E5 Hayabusa features front and rear cars that combine just like in the show to create the fully posable Shinkalion mode! The proportions are accurately recreated, with alloy parts used for the frame and Shinkansen bogies. The Kaisatsu Sword is held onto its palm with a pin for high holding power. The iconic kneeling pose can be reproduced easily, and the base, which is modeled after the interior of the Shinkansen Super Evolution Research Institute, can be displayed in Shinkansen mode too! The coupling cover can be opened and closed on both the front and rear car, because the leading cars are connected to each other when transformation begins. The fingers on the hand are movable, too! Order this amazing mech for your own collection today!

[Figure Size]: Approximately 26cm tall in Shinkalion mode
[Materials]: ABS, die-cast

[Set Contents]:

* Shinkansen E5 Series Hayabusa (leading car)
Shinkansen E5 Series Hayabusa (rear car)
Kaisatsu Sword
Wing parts (x2)
Dedicated base set

DEPOSIT: RM300.00
DEPOSIT: RM300.00 Request Stock
img
PO PriceRM290.00

S.H.Figuarts Tanjiro Kamado Battle at Infinity Castle Ver.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2025
Estimate arrival : JAN 2026

- P-O Price RM290.00
- Deposit RM50.00, Balance RM240.00
- We will inform to make balance RM240.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Tanjiro Kamado from \"Demon Slayer: Kimetsu no Yaiba\" joins the \"S.H.Figuarts\" action-figure series from Bandai, as seen in the Battle at Infinity Castle! He boasts an overwhelming range of motion, and comes with new interchangeable faces and accessories inspired by the Battle at Infinity Castle -- a background sheet using the teaser visual is also included to make your shelf display truly amazing! Order him for your own collection today!

[Figure Size]: Approximately 14cm tall
[Materials]: PVC, ABS

[Set Contents]:
Main figure
Interchangeable faces (x4)
Interchangeable hands (left and right, x3 each)
Nichirin sword set
Background sheet set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
SAVERM191.00

[Infinite Dimension] MG 1/100 In Era+ Thunderbolt 2.0 with Manta Ray Equipment (Overseas Exclusive)

Brand : In Era+ [Infinite Dimension] 
MG 1/100 In Era+ Thunderbolt 2.0 with Manta Ray Equipment
Overseas Exclusive Version

- Differences from the Ver 1.0 includes a different inner frame color, close range based equipment, a different body armor to suit close combat, and many more to be announced.
- Product design aims to use a complete mechanical skeleton. At the same time, create richer details on the mechanical skeleton. Make it more realistic and mechanical.
- The exterior armor is also refined. Designed with joint structure linkage which make the model more realistic.

Contents
- Body
- Water Decal
- Dedicated Action Base

RM189.00
img
SAVERM200.00

Robot Spirits <Side AC> EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty

- [EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty] from [ARMORED CORE(TM) VI FIRES OF RUBICON(TM)] is now available!

- In addition to the wide range of motion unique to ROBOT Spirits, some of the joints are made of die-cast parts. [EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty] has been brought to life in a 3D form with great attention to detail, coloring, and range of motion.

- Some die-cast parts are used, allowing for strong movement and shape.
- The laser slicer on the arm is also included in its deployed state.
- Needle missiles can be displayed in their deployed state by replacing parts.
- The core and bullet orbit can be replaced to recreate the deployed state. The bullet orbit body is also included in the deployed state. *[Tamashii STAGE] is sold separately.

[Set contents]
Main unit
?Interchangeable wrist parts (left and right)
?Needle gun
?Needle missile
?Needle missile deployment parts
?Laser slicer
?Laser slicer (unfolding)
?Laser slicer effect set
?Core expansion parts
?Live ammunition orbit storage state
?Parts for deploying live ammunition orbit
?Tamashii STAGE joint parts

RM700.00

Showing 241 - 270 of 629 products