• Home
  • Modelling Tools

PRODUCTS

Price Clear







Brand

Availability

Modelling Tools

Showing 91 - 98 of 98 products

Quick View
img
SAVERM22.00

Mr Hobby Mr.Tools Mr.Nipper II Cutter MT104 ( Hobby Tools )

Entry level sprue cutter


Mr. Nipper is a dual-sided, all purpose, pre-lubricated cutting tool from Mr. Hobby. Featuring a spring-assisted reopening of the handles, and a comfortable curvature of the hand grips,  Mr. Nipper is going to be the cutting tool that makes cutting plastic feel rewarding. The blades are angled slightly upwards and are flat faced, giving you a guaranteed clean cut that gives a "snappy" response, rather than the nipper "chewing" through the gates. The added pressure also reduces the amount of discoloration where it was cut.

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM131.00

Tamiya Craft Tool - Sharp Pointed Side Cutter - For Plastic (Slim Jaw)

  • This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance.
  • Length: 115mm.
  • Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge.
  • The tool is marked with the twin star logo and - TAMIYA CRAFT TOOLS - FOR PLASTIC.

RM168.00
RM168.00 Request Stock
Quick View
img
SAVERM182.00

GH-SPN-120 God Hand Ultimate Nipper Cutter 5.0 (Single-Edge)

Ultimate!!!Ultimate!!!!Ultimate!!!& Ultimate!!!!!!


As means, as the last point of reaching ultra-thin blade of a dedicated plastic nippers Plastic
This is the Ultimate Nipper. The highest rank of grade five sharpness.

- Sharpness is really good, characterized by breaks in the light force!
The reason for this is because the blade does not have only one.
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
Was not the case and say good or better sharpness both in the blade is in the same blade angle.
Nipper Ultimate 5.0 is cut with a knife and chopping board image.

Notes:
  • Ultimate 5.0 features and special nippers Plastic
  • With stopper to prevent the folding blade ,Added new feature
  • That put the stopper, and the blade edge is now not hit more than necessary.
  • A result, the break is eliminated concerned than ever before, you can use normally.
  • So good taste will be lost and disconnected when folding the parts to lose!
  • Can cut the parts for light and fatigue in the hand is hard work for a long time!
  • When the gate since it is less burr cut, reducing the processing time the gate!
Specifications
- single edged knife
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
The image of the cutting board and cut with a knife.
- Proven durability of the sharpness! !
There also consider the durability of our customers to focus on next sharpness degradation of sharpness.
Even after a test cut of the plastic stick of ?3mm of 10,000 made in our
Sharpness did not decline than other products!
The secret is because state-of-the-art technology to tool sharpening of our own.
- Will a hole in the blade and the cutting of iron wire. Please do not cut into the absolute.

- Product specification:
  • Length: 122mm
  • Weight: 60g
  • Blade length: 9mm about
  • The length of the grip: 83mm
------Coil spring spring
Light blue color of the grip-----
(To prevent out-of-function opens and spring too) with a stopper to prevent too open.
If you do not need the stopper, please remove the pin with pliers, etc.
-With the clash of blade protection
Part of the blade with a simple cap-
  • This product is the packaging blister pack
Simple explanation-papers
Made in Japan **MADE IN JAPAN

##One point advice on maintenance
  • Please give on a regular basis to oil the moving parts, such as sewing machine oil or KURE5-56.
Lubricating oil will be, it might be difficult to play.
  • After use, please I wiped clean from the blade. Can cause rust.

RM268.00
RM268.00 Request Stock
Quick View
img
SAVERM7.80

Basic Fine File Set 5 in 1

  • (Lian Bang Craft Tools) Basic File Set 
  • Comes with 5 Variety of files
  • Files type:

  • 1) Pivot file
  • 2) Equaling file
  • 3) Triangle file
  • 4) Square file 
  • 5) Round file

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM31.90

[Limitless] LS-100 Mini Electrodrill Drill, Polish, Grinding Kit

First, super fan electric drill suitable for mould processing repair burnish, is suitable for both aluminum plate, thin copper, board, plastic board, chipboard, printed circuit board, epoxy board, and can be used for drilling in polishing, cutting need components, polishing, etc., it is the most ideal production operations use tools. Ultra low voltage power source is you use the most security.
 
Second, super mini drill is imported motor as drive component, and equipped with high-quality wear-resisting out and grinding head. With reasonable structure long service life, high prices, etc. 

Highlights:

ABS plastic body and light weight for a long time work.
Quick change chuck device without any tools.
Replace different bits and chuck can drill hole of different diameter.
The supporting the use of the grinding wheel and grinding wheel for grinding and polishing cutting
Equipped with special blowing tool box small volume light weight easy to carry.

What's in the box:

1 X High-speed steel drill bit 5 (with a diameter not to 0.5; 1.0; 1.5; 2.5; 3.0)
1 X Chuck 5 (not the inside diameter of 0.5; 1.0; 1.5; 2.5; 3.0)
1 X Polished ceramic grinding wheel 4
1 X Off a grinding wheel
1 X Power adapter (output 12V 1A DC)

RM38.00
RM38.00 Request Stock
Quick View
img
SAVERM1.50

Gundam small parts storage Box - S Size

Plastic small size parts storage box 


Size :
Length : 12.8 cm x Depth : 6.8 cm x High : 2.2 cm 

RM1.50
RM1.50 Request Stock
Quick View
img
SAVERM71.70

Tamiya Craft Tools Side Cutter for Plastic (74001)

The Tamiya Side Cutter for Plastic . This is a precision side cutter for removing parts from a plastic sprue without damaging the parts. Developed exclusively for plastic modeling, the impact resistant chrome vanadic alloy material was chosen for long life. High quality vinyl covering assures good grip.

Manufacturer: Tamiya
Model: 74001 Side Cutter for Plastic

RM138.00
RM138.00 Request Stock
Quick View
img
SAVERM9.90

Tamiya Craft Knife (74013)

Tamiya -  Craft Tools 74013 CRAFT KNIFE

This Tamiya craft knife is ideal for many sorts of cutting jobs and precision tasks.

The stanley blade is extremely sharp and has only 0.38mm thickness. The frame of the knife is made of strong steel. The handle is coverd with a high quality plastic and has a special rubberized grip for extra grip and comfort.

If perfect for many sorts of cutting jobs precise jobs like cutting out bodies of cleaning plastic parts. The stanley blade has 12 snap-off parts. Also a very handy blade snapper is included to refresh your blade easy and safely.

Strong steel frame
Rubberized plastic handle for more grip and comfort
Straight stanley
Blade ( 12 snap-off parts )
Blade snapper included
0.38mm thickness
Ideal for cutting out bodies and cleaning plastic parts

RM26.00
RM26.00 Request Stock

Showing 91 - 98 of 98 products